| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1699CE87DE933F49876AD744B5DC140F9FF373@DGGEMM506-MBX.china.huawei.com>
Date: Mon, 3 Jul 2017 01:05:30 +0000
From: "liwei (CM)" <liwei213@...wei.com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
"adrian.hunter@...el.com" <adrian.hunter@...el.com>,
Jaehoon Chung <jh80.chung@...sung.com>,
Shawn Lin <shawn.lin@...k-chips.com>,
"wsa+renesas@...g-engineering.com" <wsa+renesas@...g-engineering.com>,
"hkallweit1@...il.com" <hkallweit1@...il.com>
CC: "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Guodong Xu <guodong.xu@...aro.org>
Subject: 答复: [PATCH v4] mmc: dw_mmc-k3: add sd support for hi3660
Hi,all
Sorry to bother you, but could you spare some time to help review patch v5 that I will send later. In this patch，the coding style is further improved and solve guodong's review.
Thank you very much.
-----邮件原件-----
发件人: Guodong Xu [mailto:guodong.xu@...aro.org]
发送时间: 2017年6月30日 21:28
收件人: liwei (CM)
抄送: Ulf Hansson; adrian.hunter@...el.com; Jaehoon Chung; Shawn Lin; wsa+renesas@...g-engineering.com; hkallweit1@...il.com; linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org
主题: Re: [PATCH v4] mmc: dw_mmc-k3: add sd support for hi3660
Hi, Li Wei
I have some minor comments to your patch.
> On Tue, Jun 13, 2017 at 3:25 PM, liwei <liwei213@...wei.com> wrote:
First of all, please modify author part. It is recommended to use "Li Wei", instead of what you are using now "liwei". If you are using git format-patch, send-email, please modify your ~/.gitconfig
Add a proper [user] section.
For an existing commit, you can modify the author information by running git commit --amend --author="xxx"
> Add sd card support for hi3660 soc
>
> Signed-off-by: Li Wei <liwei213@...wei.com>
> Signed-off-by: Chen Jun <chenjun14@...wei.com>
>
> Major changes in v3:
> - solve review comments from Heiner Kallweit.
> *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
> *use usleep_range() replace udelay() and mdelay().
>
> Major changes in v4:
> - solve review comments from Jaehoon Chung.
> *move common register for dwmmc controller to dwmmc header file.
> *modify definitions type of some register variables.
> *get rid of the magic numbers.
> ---
> drivers/mmc/host/dw_mmc-k3.c | 313 +++++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/host/dw_mmc.h | 2 +
> 2 files changed, 315 insertions(+)
>
> diff --git a/drivers/mmc/host/dw_mmc-k3.c
> b/drivers/mmc/host/dw_mmc-k3.c index e38fb0020bb1..c63e91ab775e 100644
> --- a/drivers/mmc/host/dw_mmc-k3.c
> +++ b/drivers/mmc/host/dw_mmc-k3.c
> @@ -8,6 +8,8 @@
> * (at your option) any later version.
> */
>
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/mfd/syscon.h>
> #include <linux/mmc/host.h>
> @@ -28,7 +30,38 @@
> #define AO_SCTRL_SEL18 BIT(10)
> #define AO_SCTRL_CTRL3 0x40C
>
> +#define DWMMC_SDIO_ID 2
> +
> +#define SOC_SCTRL_SCPERCTRL5 (0x314)
> +#define SDCARD_IO_SEL18 BIT(2)
> +
> +#define SDCARD_RD_THRESHOLD (512)
> +
> +#define GENCLK_DIV (7)
> +
> +#define GPIO_CLK_ENABLE BIT(16)
> +#define GPIO_CLK_DIV_MASK GENMASK(11, 8)
> +#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13)
> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16)
> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21)
> +#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26)
> +
> +#define TIMING_MODE 3
> +#define TIMING_CFG_NUM 10
> +
> +#define PULL_DOWN BIT(1)
> +#define PULL_UP BIT(0)
> +
> +#define NUM_PHASES (40)
> +
> +#define ENABLE_SHIFT_MIN_SMPL (4)
> +#define ENABLE_SHIFT_MAX_SMPL (12)
> +#define USE_DLY_MIN_SMPL (11)
> +#define USE_DLY_MAX_SMPL (14)
> +
> struct k3_priv {
> + int ctrl_id;
> + u32 cur_speed;
> struct regmap *reg;
> };
>
> @@ -38,6 +71,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
> 0
> };
>
> +struct hs_timing {
> + u32 drv_phase;
> + u32 smpl_dly;
> + u32 smpl_phase_max;
> + u32 smpl_phase_min;
> +};
> +
> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
> + { /* reserved */ },
> + { /* SD */
> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */
> + {6, 0, 4, 4,}, /* 1: MMC_HS */
> + {6, 0, 3, 3,}, /* 2: SD_HS */
> + {6, 0, 15, 15,}, /* 3: SDR12 */
> + {6, 0, 2, 2,}, /* 4: SDR25 */
> + {4, 0, 11, 0,}, /* 5: SDR50 */
> + {6, 4, 15, 0,}, /* 6: SDR104 */
> + {0}, /* 7: DDR50 */
> + {0}, /* 8: DDR52 */
> + {0}, /* 9: HS200 */
> + },
> + { /* SDIO */
> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */
> + {0}, /* 1: MMC_HS */
> + {6, 0, 15, 15,}, /* 2: SD_HS */
> + {6, 0, 15, 15,}, /* 3: SDR12 */
> + {6, 0, 0, 0,}, /* 4: SDR25 */
> + {4, 0, 12, 0,}, /* 5: SDR50 */
> + {5, 4, 15, 0,}, /* 6: SDR104 */
> + {0}, /* 7: DDR50 */
> + {0}, /* 8: DDR52 */
> + {0}, /* 9: HS200 */
> + }
> +};
> +
> static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios
> *ios) {
> int ret;
> @@ -66,6 +134,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
> if (IS_ERR(priv->reg))
> priv->reg = NULL;
>
> + priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
> + if (priv->ctrl_id < 0)
> + priv->ctrl_id = 0;
> +
> host->priv = priv;
> return 0;
> }
> @@ -144,7 +216,243 @@ static const struct dw_mci_drv_data hi6220_data = {
> .execute_tuning = dw_mci_hi6220_execute_tuning,
> };
>
> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, int
> +smpl_phase) {
> + u32 drv_phase;
> + u32 smpl_dly;
> + u32 use_smpl_dly = 0;
> + u32 enable_shift = 0;
> + u32 reg_value;
> + int ctrl_id;
> + struct k3_priv *priv;
> +
> + priv = host->priv;
> + ctrl_id = priv->ctrl_id;
> +
> + drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
> + smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly;
> + if (smpl_phase == -1)
> + smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
> +
> + hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
> +
> + switch (timing) {
> + case MMC_TIMING_UHS_SDR104:
> + if (smpl_phase >= USE_DLY_MIN_SMPL &&
> + smpl_phase <= USE_DLY_MAX_SMPL)
> + use_smpl_dly = 1;
> + case MMC_TIMING_UHS_SDR50:
> + if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
> + smpl_phase <= ENABLE_SHIFT_MAX_SMPL) {
> + enable_shift = 1;
> + break;
> + }
> + }
In this line, I saw extra trailing whitespace. Please fix it.
> +
> + mci_writel(host, GPIO, 0x0);
> + usleep_range(5, 10);
> +
> + reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |\
> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK ,smpl_dly) |\
> +
> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK,drv_phase);
In this line, I saw extra trailing whitespace. Please fix it.
> + mci_writel(host, UHS_REG_EXT, reg_value);
> +
> + mci_writel(host, ENABLE_SHIFT, enable_shift);
> +
> + reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |\
> + FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK,use_smpl_dly);
> + mci_writel(host, GPIO, (unsigned int)reg_value |
> + GPIO_CLK_ENABLE);
> +
> + /* We should delay 1ms wait for timing setting finished. */
> + usleep_range(1000, 2000);
> +}
> +
> +static int dw_mci_hi3660_init(struct dw_mci *host) {
> + mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
> +
> +SDMMC_CARD_RD_THR_EN));
> +
> + dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
> + host->bus_hz /= (GENCLK_DIV + 1);
> +
> + return 0;
> +}
> +
> +static int dw_mci_set_sel18(struct dw_mci *host, bool set) {
> + int ret;
> + unsigned int val;
> + struct k3_priv *priv;
> +
> + priv = host->priv;
> +
> + val = set ? SDCARD_IO_SEL18 : 0;
> + ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
> + SDCARD_IO_SEL18, val);
> + if (ret) {
> + dev_err(host->dev, "sel18 %u error\n", val);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
> +{
> + int ret;
> + unsigned long wanted;
> + unsigned long actual;
> + struct k3_priv *priv = host->priv;
> +
> + if (!ios->clock || ios->clock == priv->cur_speed)
> + return;
> +
> + wanted = ios->clock * (GENCLK_DIV + 1);
> + ret = clk_set_rate(host->ciu_clk, wanted);
> + if (ret) {
> + dev_err(host->dev, "failed to set rate %luHz\n", wanted);
> + return;
> + }
> + actual = clk_get_rate(host->ciu_clk);
> +
> + dw_mci_hs_set_timing(host, ios->timing, -1);
> + host->bus_hz = actual / (GENCLK_DIV + 1);
> + host->current_speed = 0;
> + priv->cur_speed = host->bus_hz; }
> +
> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag) {
> + int i;
> + int interval;
> + unsigned int v;
> + unsigned int len;
> + unsigned int range_start = 0;
> + unsigned int range_length = 0;
> + unsigned int middle_range = 0;
> +
> + if (!sample_flag)
> + return -EIO;
> +
> + if (~sample_flag == 0)
> + return 0;
> +
> + i = ffs(sample_flag) - 1;
> +
> + /*A clock cycle is divided into 32 phases,
An extra trailing whitespace is in the above line too. Please fix it.
> + *each of which is represented by a bit, finding the optimal phase.
> + */
The comment style here is very strange. You should add a ' ' between '/*' and the comment. Like this:
/* A clock cycle
-Guodong
> + while (i < 32) {
> + v = ror32(sample_flag, i);
> + len = ffs(~v) - 1;
> +
> + if (len > range_length) {
> + range_length = len;
> + range_start = i;
> + }
> +
> + interval = ffs(v >> len) - 1;
> + if (interval < 0)
> + break;
> +
> + i += len + interval;
> + }
> +
> + middle_range = range_start + range_length / 2;
> + if (middle_range >= 32)
> + middle_range %= 32;
> +
> + return middle_range;
> +}
> +
> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32
> +opcode) {
> + int i = 0;
> + struct dw_mci *host = slot->host;
> + struct mmc_host *mmc = slot->mmc;
> + int smpl_phase = 0;
> + u32 tuning_sample_flag = 0;
> + int best_clksmpl = 0;
> +
> + for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
> + smpl_phase %= 32;
> +
> + mci_writel(host, TMOUT, ~0);
> + dw_mci_hs_set_timing(host, mmc->ios.timing,
> + smpl_phase);
> +
> + if (!mmc_send_tuning(mmc, opcode, NULL))
> + tuning_sample_flag |= (1 << smpl_phase);
> + else
> + tuning_sample_flag &= ~(1 << smpl_phase);
> + }
> +
> + best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
> + if (best_clksmpl < 0) {
> + dev_err(host->dev, "All phases bad!\n");
> + return -EIO;
> + }
> +
> + dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
> +
> + dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
> + best_clksmpl, tuning_sample_flag);
> + return 0;
> +}
> +
> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
> + struct mmc_ios *ios) {
> + int ret;
> + int min_uv = 0;
> + int max_uv = 0;
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct k3_priv *priv;
> + struct dw_mci *host;
> +
> + host = slot->host;
> + priv = host->priv;
> +
> + if (!priv || !priv->reg)
> + return 0;
> +
> + if (priv->ctrl_id == DWMMC_SDIO_ID)
> + return 0;
> +
> + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> + ret = dw_mci_set_sel18(host, 0);
> + if (ret)
> + return ret;
> + min_uv = 2950000;
> + max_uv = 2950000;
> + } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> + ret = dw_mci_set_sel18(host, 1);
> + if (ret)
> + return ret;
> + min_uv = 1800000;
> + max_uv = 1800000;
> + }
> +
> + if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
> + return 0;
> +
> + ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
> + if (ret) {
> + dev_err(host->dev, "Regulator set error %d: %d - %d\n",
> + ret, min_uv, max_uv);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static const struct dw_mci_drv_data hi3660_data = {
> + .init = dw_mci_hi3660_init,
> + .set_ios = dw_mci_hi3660_set_ios,
> + .parse_dt = dw_mci_hi6220_parse_dt,
> + .execute_tuning = dw_mci_hi3660_execute_tuning,
> + .switch_voltage = dw_mci_hi3660_switch_voltage, };
> +
> static const struct of_device_id dw_mci_k3_match[] = {
> + { .compatible = "hisilicon,hi3660-dw-mshc", .data =
> + &hi3660_data, },
> { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
> { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
> {},
> @@ -155,6 +463,11 @@ static int dw_mci_k3_probe(struct platform_device
> *pdev) {
> const struct dw_mci_drv_data *drv_data;
> const struct of_device_id *match;
> + struct reset_control *rst;
> +
> + rst = devm_reset_control_get(&pdev->dev, NULL);
> + if (!IS_ERR(rst))
> + reset_control_reset(rst);
>
> match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
> drv_data = match->data;
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index ce347361f3dc..7cdcafda8eec 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -319,6 +319,8 @@ struct dw_mci_board {
> #define SDMMC_DSCADDR 0x094
> #define SDMMC_BUFADDR 0x098
> #define SDMMC_CDTHRCTL 0x100
> +#define SDMMC_UHS_REG_EXT 0x108
> +#define SDMMC_ENABLE_SHIFT 0x110
> #define SDMMC_DATA(x) (x)
> /*
> * Registers to support idmac 64-bit address mode
> --
> 2.11.0
>
Powered by blists - more mailing lists