lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170705061721.achgce3jw7fy3aly@rfolt0960.corp.atmel.com>
Date:   Wed, 5 Jul 2017 08:17:21 +0200
From:   Ludovic Desroches <ludovic.desroches@...rochip.com>
To:     Claudiu Beznea <claudiu.beznea@...rochip.com>
CC:     <nicolas.ferre@...rochip.com>,
        <alexandre.belloni@...e-electrons.com>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <linux@...linux.org.uk>, <sza@....hu>,
        <devicetree@...r.kernel.org>, <cristian.birsan@...rochip.com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 0/5] Add SoM1 support

On Mon, Jul 03, 2017 at 03:56:07PM +0300, Claudiu Beznea wrote:
> Hi all,
> 
> This series adds support for sama5d2 SoM1 devices.
> 
> The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board.
> The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board.
> 
> The sama5d27_som1_ek uses a EEPROM binding, "start-offset", which is
> introduced in patch series: "[RFC PATCH 0/3] Add at24 functionality to
> read form different EEPROM offsets".
> 
> Thank you,
> Claudiu
> 

For the whole set of patches:
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>

> Changes in v2:
> o in at91-sama5d27_som1.dtsi:
> - increase bootloader and kernel size in flash map (with bootloader
> flash offset the dtb and kernel flash offsets were changed)
> - use right pin for ethernet-phy interrupt
> 
> o in at91-sama5d27_som1_ek.dts:
> - removed memory tag and rely on bootloader to fill the right value
> - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever
> posible instead of pin numbers
> - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing
> since they are not of intereset for this board
> - use "pb4" label for user button instead of "bp1"
> 
> Claudiu Beznea (2):
>   ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
>   ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support
> 
> Cristian Birsan (1):
>   drivers: soc: atmel: Add basic support for new sama5d2 SiPs
> 
> Cyrille Pitchen (1):
>   ARM: dts: at91: sama5d2: add QSPI nodes
> 
> Songjun Wu (1):
>   ARM: dts: at91: sama5d2: add isc node
> 
>  arch/arm/boot/dts/Makefile                  |   1 +
>  arch/arm/boot/dts/at91-sama5d27_som1.dtsi   | 178 +++++++++
>  arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++
>  arch/arm/boot/dts/sama5d2.dtsi              |  38 ++
>  drivers/soc/atmel/soc.c                     |   8 +
>  drivers/soc/atmel/soc.h                     |   4 +
>  6 files changed, 780 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>  create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> 
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ