[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fd9776db-f705-5fee-cf5e-7e6c016f8f37@baylibre.com>
Date: Thu, 6 Jul 2017 13:27:37 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: Jose Abreu <Jose.Abreu@...opsys.com>
Cc: architt@...eaurora.org, a.hajda@...sung.com,
linux-amlogic@...ts.infradead.org,
Russell King <rmk+kernel@...linux.org.uk>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH] drm/bridge: dw_hdmi: add cec notifier support
On 07/06/2017 12:43 PM, Jose Abreu wrote:
> Hi Neil,
>
>
> On 06-07-2017 11:33, Neil Armstrong wrote:
>> From: Russell King <rmk+kernel@...linux.org.uk>
>>
>> Add CEC notifier support to the HDMI bridge driver, so that the CEC
>> part of the IP can receive its physical address.
>>
>> Tested-by: Neil Armstrong <narmstrong@...libre.com>
>> Acked-by: Neil Armstrong <narmstrong@...libre.com>
>> Acked-by: Hans Verkuil <hans.verkuil@...co.com>
>> Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
>> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> Hi Archit, Hans,
>>
>> This is repost of Russell's patch from his dw-hdmi CEC patchset.
>>
>> Since his CEC implementation will be integrated in the bridge driver,
>> this notifier patch won't be re-posted.
>>
>> But the Amlogic Platform needs a notifier since it uses a standalone CEC
>> controller.
>>
>> Thanks,
>> Neil
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index ead1124..9c03846 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -33,6 +33,8 @@
>> #include <uapi/linux/media-bus-format.h>
>> #include <uapi/linux/videodev2.h>
>>
>> +#include <media/cec-notifier.h>
>
> Don't you also have to "select CEC_NOTIFIER" in Kconfig? Or is it
> not needed anymore with the recent Kconfig changes of CEC?
Hi Jose,
Seems no, since the cec functions are protected with :
#if IS_REACHABLE(CONFIG_CEC_CORE) && IS_ENABLED(CONFIG_CEC_NOTIFIER)
and replaced with dummy inline functions.
Neil
>
> Best regards,
> Jose Miguel Abreu
>
>> +
>> #include "dw-hdmi.h"
>> #include "dw-hdmi-audio.h"
>>
>> @@ -175,6 +177,8 @@ struct dw_hdmi {
>> struct regmap *regm;
>> void (*enable_audio)(struct dw_hdmi *hdmi);
>> void (*disable_audio)(struct dw_hdmi *hdmi);
>> +
>> + struct cec_notifier *cec_notifier;
>> };
>>
>> #define HDMI_IH_PHY_STAT0_RX_SENSE \
>> @@ -1896,6 +1900,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
>> hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
>> hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
>> drm_mode_connector_update_edid_property(connector, edid);
>> + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
>> ret = drm_add_edid_modes(connector, edid);
>> /* Store the ELD */
>> drm_edid_to_eld(connector, edid);
>> @@ -2077,6 +2082,10 @@ void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
>> dw_hdmi_update_phy_mask(hdmi);
>> }
>> mutex_unlock(&hdmi->mutex);
>> +
>> + if (!rx_sense && !hpd)
>> + cec_notifier_set_phys_addr(hdmi->cec_notifier,
>> + CEC_PHYS_ADDR_INVALID);
>> }
>>
>> void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
>> @@ -2376,6 +2385,12 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>> if (ret)
>> goto err_iahb;
>>
>> + hdmi->cec_notifier = cec_notifier_get(dev);
>> + if (!hdmi->cec_notifier) {
>> + ret = -ENOMEM;
>> + goto err_iahb;
>> + }
>> +
>> /*
>> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
>> * N and cts values before enabling phy
>> @@ -2452,6 +2467,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>> hdmi->ddc = NULL;
>> }
>>
>> + if (hdmi->cec_notifier)
>> + cec_notifier_put(hdmi->cec_notifier);
>> +
>> clk_disable_unprepare(hdmi->iahb_clk);
>> err_isfr:
>> clk_disable_unprepare(hdmi->isfr_clk);
>
Powered by blists - more mailing lists