| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <68b476b35b0c0cbce21da0e87338323bb77e9bc4.1499347157.git.leonard.crestez@nxp.com>
Date: Thu, 6 Jul 2017 16:20:42 +0300
From: Leonard Crestez <leonard.crestez@....com>
To: Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Lothar Waßmann <LW@...O-electronics.de>
CC: Fabio Estevam <fabio.estevam@....com>,
Dong Aisheng <aisheng.dong@....com>,
Bai Ping <ping.bai@....com>, Anson Huang <Anson.Huang@....com>,
Octavian Purdila <octavian.purdila@....com>,
<linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 2/4] thermal: imx: Add support for reading OCOTP through nvmem
On newer imx SOCs accessing OCOTP directly is wrong because the ocotp clock
needs to be enabled first. Add support for reading those same values through
the nvmem API instead.
The older path is preserved for compatibility with older dts and because it
works correctly on imx6qdl chips.
Signed-off-by: Leonard Crestez <leonard.crestez@....com>
---
drivers/thermal/imx_thermal.c | 131 ++++++++++++++++++++++++++++++++----------
1 file changed, 101 insertions(+), 30 deletions(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index fb648a4..ffbd579 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/thermal.h>
#include <linux/types.h>
+#include <linux/nvmem-consumer.h>
#define REG_SET 0x4
#define REG_CLR 0x8
@@ -92,7 +93,7 @@ struct imx_thermal_data {
struct thermal_cooling_device *cdev;
enum thermal_device_mode mode;
struct regmap *tempmon;
- u32 c1, c2; /* See formula in imx_get_sensor_data() */
+ u32 c1, c2; /* See formula in imx_init_calib() */
int temp_passive;
int temp_critical;
int temp_max;
@@ -175,7 +176,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT;
- /* See imx_get_sensor_data() for formula derivation */
+ /* See imx_init_calib() for formula derivation */
*temp = data->c2 - n_meas * data->c1;
/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
@@ -344,29 +345,12 @@ static struct thermal_zone_device_ops imx_tz_ops = {
.set_trip_temp = imx_set_trip_temp,
};
-static int imx_get_sensor_data(struct platform_device *pdev)
+static int imx_init_calib(struct platform_device *pdev, u32 val)
{
struct imx_thermal_data *data = platform_get_drvdata(pdev);
- struct regmap *map;
int t1, n1;
- int ret;
- u32 val;
u64 temp64;
- map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
- "fsl,tempmon-data");
- if (IS_ERR(map)) {
- ret = PTR_ERR(map);
- dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
- return ret;
- }
-
- ret = regmap_read(map, OCOTP_ANA1, &val);
- if (ret) {
- dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
- return ret;
- }
-
if (val == 0 || val == ~0) {
dev_err(&pdev->dev, "invalid sensor calibration data\n");
return -EINVAL;
@@ -403,12 +387,12 @@ static int imx_get_sensor_data(struct platform_device *pdev)
data->c1 = temp64;
data->c2 = n1 * data->c1 + 1000 * t1;
- /* use OTP for thermal grade */
- ret = regmap_read(map, OCOTP_MEM0, &val);
- if (ret) {
- dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret);
- return ret;
- }
+ return 0;
+}
+
+static void imx_init_temp_grade(struct platform_device *pdev, u32 val)
+{
+ struct imx_thermal_data *data = platform_get_drvdata(pdev);
/* The maximum die temp is specified by the Temperature Grade */
switch ((val >> 6) & 0x3) {
@@ -436,10 +420,87 @@ static int imx_get_sensor_data(struct platform_device *pdev)
*/
data->temp_critical = data->temp_max - (1000 * 5);
data->temp_passive = data->temp_max - (1000 * 10);
+}
+
+static int imx_init_from_tempmon_data(struct platform_device *pdev)
+{
+ struct regmap *map;
+ int ret;
+ u32 val;
+
+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "fsl,tempmon-data");
+ if (IS_ERR(map)) {
+ ret = PTR_ERR(map);
+ dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(map, OCOTP_ANA1, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+ return ret;
+ }
+ ret = imx_init_calib(pdev, val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, OCOTP_MEM0, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+ return ret;
+ }
+ imx_init_temp_grade(pdev, val);
return 0;
}
+static int nvmem_cell_read_u32(struct device* dev, const char *cell_id, u32 *val)
+{
+ struct nvmem_cell *cell;
+ void *buf;
+ size_t len;
+
+ cell = nvmem_cell_get(dev, cell_id);
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ buf = nvmem_cell_read(cell, &len);
+ if (IS_ERR(buf)) {
+ nvmem_cell_put(cell);
+ return PTR_ERR(buf);
+ }
+ if (len != sizeof(*val)) {
+ kfree(buf);
+ nvmem_cell_put(cell);
+ return -EINVAL;
+ }
+ memcpy(val, buf, sizeof(*val));
+
+ kfree(buf);
+ nvmem_cell_put(cell);
+ return 0;
+}
+
+static int imx_init_from_nvmem_cells(struct platform_device *pdev)
+{
+ int ret;
+ u32 val;
+
+ ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val);
+ if (ret)
+ return ret;
+ imx_init_calib(pdev, val);
+
+ ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val);
+ if (ret)
+ return ret;
+ imx_init_temp_grade(pdev, val);
+
+ return 0;
+}
+
+
static irqreturn_t imx_thermal_alarm_irq(int irq, void *dev)
{
struct imx_thermal_data *data = dev;
@@ -512,10 +573,20 @@ static int imx_thermal_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
- ret = imx_get_sensor_data(pdev);
- if (ret) {
- dev_err(&pdev->dev, "failed to get sensor data\n");
- return ret;
+ if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
+ ret = imx_init_from_nvmem_cells(pdev);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ if (ret) {
+ dev_err(&pdev->dev, "failed to init from nvmem: %d\n", ret);
+ return ret;
+ }
+ } else {
+ ret = imx_init_from_tempmon_data(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to init from from fsl,tempmon-data\n");
+ return ret;
+ }
}
/* Make sure sensor is in known good state for measurements */
--
2.7.4
Powered by blists - more mailing lists