Message-Id: <20170709202942.12529-1-afaerber@suse.de>
Date:   Sun,  9 Jul 2017 22:29:42 +0200
From:   Andreas Färber <afaerber@...e.de>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-serial@...r.kernel.org
Cc:     linux-arm-kernel@...ts.infradead.org,
        Thomas Liau <thomas.liau@...ions-semi.com>,
        张东风 <zhangdf@...ions-semi.com>,
        刘炜 <liuwei@...ions-semi.com>,
        张天益 <tyzhang@...ions-semi.com>,
        梅利 <harrymei@...ions-semi.com>,
        96boards@...obotics.com, support@...aker.org,
        support@...ietech.com, lee@...ietech.com,
        Alan Cox <gnomes@...rguk.ukuu.org.uk>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        linux-kernel@...r.kernel.org,
        Andreas Färber <afaerber@...e.de>,
        Jiri Slaby <jslaby@...e.com>
Subject: [PATCH v5] tty: serial: owl: Implement console driver

Implement serial console driver to complement earlycon.

Based on LeMaker linux-actions tree.

Signed-off-by: Andreas Färber <afaerber@...e.de>
---
 v4 -> v5:
 * Don't clear HUPCL, IGNBRK or BRKINT (Alan)
 * Don't set CLOCAL (Alan)
 * Added tty_termios_encode_baud_rate() call (Alan)
 * Extended get_mctrl with RTS/CTS
 * Adopted GENMASK() macro (Andy)
 * Dropped cast from void * (Andy)
 * Adopted devm_clk_get() (Andy)
 * Checked for uartclk == 0 (Andy)
 * Changed port ID from 117 to unused 36 (Andy)
 * Adopted spin_lock_irqsave() in owl_uart_irq() (Andy)
 * Adopted platform_get_irq() (Andy)
 * Implemented TIOCM_LOOP in set_mctrl
 * Switched platform driver to s500/s900 compatibles from owl
 * Set TX fifosize based on compatible (16 -> 32 for S900)
 
 v3 -> v4: Unchanged
 
 v2 -> v3:
 * Adopted BIT() macro
 * Implemented baudrate setting
 
 v2: new
 
 drivers/tty/serial/Kconfig       |   4 +-
 drivers/tty/serial/owl-uart.c    | 635 ++++++++++++++++++++++++++++++++++++++-
 include/uapi/linux/serial_core.h |   1 +
 3 files changed, 636 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1f096e2bb398..b788fee54249 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1689,7 +1689,7 @@ config SERIAL_MVEBU_CONSOLE
 	  Otherwise, say 'N'.
 
 config SERIAL_OWL
-	bool "Actions Semi Owl serial port support"
+	tristate "Actions Semi Owl serial port support"
 	depends on ARCH_ACTIONS || COMPILE_TEST
 	select SERIAL_CORE
 	help
@@ -1705,7 +1705,7 @@ config SERIAL_OWL_CONSOLE
 	default y
 	help
 	  Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
-	  as the system console. Only earlycon is implemented currently.
+	  as the system console.
 
 endmenu
 
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 1b8008797a1b..683b05478ade 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -20,6 +20,7 @@
  * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -28,22 +29,66 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#define OWL_UART_PORT_NUM 7
+#define OWL_UART_DEV_NAME "ttyOWL"
 
 #define OWL_UART_CTL	0x000
+#define OWL_UART_RXDAT	0x004
 #define OWL_UART_TXDAT	0x008
 #define OWL_UART_STAT	0x00c
 
+#define OWL_UART_CTL_DWLS_MASK		GENMASK(1, 0)
+#define OWL_UART_CTL_DWLS_5BITS		(0x0 << 0)
+#define OWL_UART_CTL_DWLS_6BITS		(0x1 << 0)
+#define OWL_UART_CTL_DWLS_7BITS		(0x2 << 0)
+#define OWL_UART_CTL_DWLS_8BITS		(0x3 << 0)
+#define OWL_UART_CTL_STPS_2BITS		BIT(2)
+#define OWL_UART_CTL_PRS_MASK		GENMASK(6, 4)
+#define OWL_UART_CTL_PRS_NONE		(0x0 << 4)
+#define OWL_UART_CTL_PRS_ODD		(0x4 << 4)
+#define OWL_UART_CTL_PRS_MARK		(0x5 << 4)
+#define OWL_UART_CTL_PRS_EVEN		(0x6 << 4)
+#define OWL_UART_CTL_PRS_SPACE		(0x7 << 4)
+#define OWL_UART_CTL_AFE		BIT(12)
 #define OWL_UART_CTL_TRFS_TX		BIT(14)
 #define OWL_UART_CTL_EN			BIT(15)
+#define OWL_UART_CTL_RXDE		BIT(16)
+#define OWL_UART_CTL_TXDE		BIT(17)
 #define OWL_UART_CTL_RXIE		BIT(18)
 #define OWL_UART_CTL_TXIE		BIT(19)
+#define OWL_UART_CTL_LBEN		BIT(20)
 
 #define OWL_UART_STAT_RIP		BIT(0)
 #define OWL_UART_STAT_TIP		BIT(1)
+#define OWL_UART_STAT_RXER		BIT(2)
+#define OWL_UART_STAT_TFER		BIT(3)
+#define OWL_UART_STAT_RXST		BIT(4)
+#define OWL_UART_STAT_RFEM		BIT(5)
 #define OWL_UART_STAT_TFFU		BIT(6)
-#define OWL_UART_STAT_TRFL_MASK		(0x1f << 11)
+#define OWL_UART_STAT_CTSS		BIT(7)
+#define OWL_UART_STAT_RTSS		BIT(8)
+#define OWL_UART_STAT_TFES		BIT(10)
+#define OWL_UART_STAT_TRFL_MASK		GENMASK(16, 11)
 #define OWL_UART_STAT_UTBB		BIT(17)
 
+static struct uart_driver owl_uart_driver;
+
+struct owl_uart_info {
+	unsigned int tx_fifosize;
+};
+
+struct owl_uart_port {
+	struct uart_port port;
+	struct clk *clk;
+};
+
+#define to_owl_uart_port(prt) container_of(prt, struct owl_uart_port, prt)
+
+static struct owl_uart_port *owl_uart_ports[OWL_UART_PORT_NUM];
+
 static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off)
 {
 	writel(val, port->membase + off);
@@ -54,6 +99,397 @@ static inline u32 owl_uart_read(struct uart_port *port, unsigned int off)
 	return readl(port->membase + off);
 }
 
+static void owl_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	u32 ctl;
+
+	ctl = owl_uart_read(port, OWL_UART_CTL);
+
+	if (mctrl & TIOCM_LOOP)
+		ctl |= OWL_UART_CTL_LBEN;
+	else
+		ctl &= ~OWL_UART_CTL_LBEN;
+
+	owl_uart_write(port, ctl, OWL_UART_CTL);
+}
+
+static unsigned int owl_uart_get_mctrl(struct uart_port *port)
+{
+	unsigned int mctrl = TIOCM_CAR | TIOCM_DSR;
+	u32 stat, ctl;
+
+	ctl = owl_uart_read(port, OWL_UART_CTL);
+	stat = owl_uart_read(port, OWL_UART_STAT);
+	if (stat & OWL_UART_STAT_RTSS)
+		mctrl |= TIOCM_RTS;
+	if ((stat & OWL_UART_STAT_CTSS) || !(ctl & OWL_UART_CTL_AFE))
+		mctrl |= TIOCM_CTS;
+	return mctrl;
+}
+
+static unsigned int owl_uart_tx_empty(struct uart_port *port)
+{
+	unsigned long flags;
+	u32 val;
+	unsigned int ret;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	val = owl_uart_read(port, OWL_UART_STAT);
+	ret = (val & OWL_UART_STAT_TFES) ? TIOCSER_TEMT : 0;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return ret;
+}
+
+static void owl_uart_stop_rx(struct uart_port *port)
+{
+	u32 val;
+
+	val = owl_uart_read(port, OWL_UART_CTL);
+	val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_RXDE);
+	owl_uart_write(port, val, OWL_UART_CTL);
+
+	val = owl_uart_read(port, OWL_UART_STAT);
+	val |= OWL_UART_STAT_RIP;
+	owl_uart_write(port, val, OWL_UART_STAT);
+}
+
+static void owl_uart_stop_tx(struct uart_port *port)
+{
+	u32 val;
+
+	val = owl_uart_read(port, OWL_UART_CTL);
+	val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_TXDE);
+	owl_uart_write(port, val, OWL_UART_CTL);
+
+	val = owl_uart_read(port, OWL_UART_STAT);
+	val |= OWL_UART_STAT_TIP;
+	owl_uart_write(port, val, OWL_UART_STAT);
+}
+
+static void owl_uart_start_tx(struct uart_port *port)
+{
+	u32 val;
+
+	if (uart_tx_stopped(port)) {
+		owl_uart_stop_tx(port);
+		return;
+	}
+
+	val = owl_uart_read(port, OWL_UART_STAT);
+	val |= OWL_UART_STAT_TIP;
+	owl_uart_write(port, val, OWL_UART_STAT);
+
+	val = owl_uart_read(port, OWL_UART_CTL);
+	val |= OWL_UART_CTL_TXIE;
+	owl_uart_write(port, val, OWL_UART_CTL);
+}
+
+static void owl_uart_send_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned int ch;
+
+	if (uart_tx_stopped(port))
+		return;
+
+	if (port->x_char) {
+		while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU))
+			cpu_relax();
+		owl_uart_write(port, port->x_char, OWL_UART_TXDAT);
+		port->icount.tx++;
+		port->x_char = 0;
+	}
+
+	while (!(owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)) {
+		if (uart_circ_empty(xmit))
+			break;
+
+		ch = xmit->buf[xmit->tail];
+		owl_uart_write(port, ch, OWL_UART_TXDAT);
+		xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		owl_uart_stop_tx(port);
+}
+
+static void owl_uart_receive_chars(struct uart_port *port)
+{
+	u32 stat, val;
+
+	val = owl_uart_read(port, OWL_UART_CTL);
+	val &= ~OWL_UART_CTL_TRFS_TX;
+	owl_uart_write(port, val, OWL_UART_CTL);
+
+	stat = owl_uart_read(port, OWL_UART_STAT);
+	while (!(stat & OWL_UART_STAT_RFEM)) {
+		char flag = TTY_NORMAL;
+
+		if (stat & OWL_UART_STAT_RXER)
+			port->icount.overrun++;
+
+		if (stat & OWL_UART_STAT_RXST) {
+			/* We are not able to distinguish the error type. */
+			port->icount.brk++;
+			port->icount.frame++;
+
+			stat &= port->read_status_mask;
+			if (stat & OWL_UART_STAT_RXST)
+				flag = TTY_PARITY;
+		} else
+			port->icount.rx++;
+
+		val = owl_uart_read(port, OWL_UART_RXDAT);
+		val &= 0xff;
+
+		if ((stat & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(&port->state->port, val, flag);
+
+		stat = owl_uart_read(port, OWL_UART_STAT);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(&port->state->port);
+	spin_lock(&port->lock);
+}
+
+static irqreturn_t owl_uart_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned long flags;
+	u32 stat;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	stat = owl_uart_read(port, OWL_UART_STAT);
+
+	if (stat & OWL_UART_STAT_RIP)
+		owl_uart_receive_chars(port);
+
+	if (stat & OWL_UART_STAT_TIP)
+		owl_uart_send_chars(port);
+
+	stat = owl_uart_read(port, OWL_UART_STAT);
+	stat |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP;
+	owl_uart_write(port, stat, OWL_UART_STAT);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void owl_uart_shutdown(struct uart_port *port)
+{
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	val = owl_uart_read(port, OWL_UART_CTL);
+	val &= ~(OWL_UART_CTL_TXIE | OWL_UART_CTL_RXIE
+		| OWL_UART_CTL_TXDE | OWL_UART_CTL_RXDE | OWL_UART_CTL_EN);
+	owl_uart_write(port, val, OWL_UART_CTL);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	free_irq(port->irq, port);
+}
+
+static int owl_uart_startup(struct uart_port *port)
+{
+	u32 val;
+	unsigned long flags;
+	int ret;
+
+	ret = request_irq(port->irq, owl_uart_irq, IRQF_TRIGGER_HIGH,
+			"owl-uart", port);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	val = owl_uart_read(port, OWL_UART_STAT);
+	val |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP
+		| OWL_UART_STAT_RXER | OWL_UART_STAT_TFER | OWL_UART_STAT_RXST;
+	owl_uart_write(port, val, OWL_UART_STAT);
+
+	val = owl_uart_read(port, OWL_UART_CTL);
+	val |= OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE;
+	val |= OWL_UART_CTL_EN;
+	owl_uart_write(port, val, OWL_UART_CTL);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void owl_uart_change_baudrate(struct owl_uart_port *owl_port,
+				     unsigned long baud)
+{
+	clk_set_rate(owl_port->clk, baud * 8);
+}
+
+static void owl_uart_set_termios(struct uart_port *port,
+				 struct ktermios *termios,
+				 struct ktermios *old)
+{
+	struct owl_uart_port *owl_port = to_owl_uart_port(port);
+	unsigned int baud;
+	u32 ctl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ctl = owl_uart_read(port, OWL_UART_CTL);
+
+	ctl &= ~OWL_UART_CTL_DWLS_MASK;
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		ctl |= OWL_UART_CTL_DWLS_5BITS;
+		break;
+	case CS6:
+		ctl |= OWL_UART_CTL_DWLS_6BITS;
+		break;
+	case CS7:
+		ctl |= OWL_UART_CTL_DWLS_7BITS;
+		break;
+	case CS8:
+	default:
+		ctl |= OWL_UART_CTL_DWLS_8BITS;
+		break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		ctl |= OWL_UART_CTL_STPS_2BITS;
+	else
+		ctl &= ~OWL_UART_CTL_STPS_2BITS;
+
+	ctl &= ~OWL_UART_CTL_PRS_MASK;
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & CMSPAR) {
+			if (termios->c_cflag & PARODD)
+				ctl |= OWL_UART_CTL_PRS_MARK;
+			else
+				ctl |= OWL_UART_CTL_PRS_SPACE;
+		} else if (termios->c_cflag & PARODD)
+			ctl |= OWL_UART_CTL_PRS_ODD;
+		else
+			ctl |= OWL_UART_CTL_PRS_EVEN;
+	} else
+		ctl |= OWL_UART_CTL_PRS_NONE;
+
+	if (termios->c_cflag & CRTSCTS)
+		ctl |= OWL_UART_CTL_AFE;
+	else
+		ctl &= ~OWL_UART_CTL_AFE;
+
+	owl_uart_write(port, ctl, OWL_UART_CTL);
+
+	baud = uart_get_baud_rate(port, termios, old, 9600, 3200000);
+	owl_uart_change_baudrate(owl_port, baud);
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+	port->read_status_mask |= OWL_UART_STAT_RXER;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= OWL_UART_STAT_RXST;
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void owl_uart_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return;
+
+	if (port->flags & UPF_IOREMAP) {
+		devm_release_mem_region(port->dev, port->mapbase,
+			resource_size(res));
+		devm_iounmap(port->dev, port->membase);
+		port->membase = NULL;
+	}
+}
+
+static int owl_uart_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	if (!devm_request_mem_region(port->dev, port->mapbase,
+			resource_size(res), dev_name(port->dev)))
+		return -EBUSY;
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
+				resource_size(res));
+		if (!port->membase)
+			return -EBUSY;
+	}
+
+	return 0;
+}
+
+static const char *owl_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_OWL) ? "owl-uart" : NULL;
+}
+
+static int owl_uart_verify_port(struct uart_port *port,
+				struct serial_struct *ser)
+{
+	if (port->type != PORT_OWL)
+		return -EINVAL;
+
+	if (port->irq != ser->irq)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void owl_uart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_OWL;
+		owl_uart_request_port(port);
+	}
+}
+
+static struct uart_ops owl_uart_ops = {
+	.set_mctrl = owl_uart_set_mctrl,
+	.get_mctrl = owl_uart_get_mctrl,
+	.tx_empty = owl_uart_tx_empty,
+	.start_tx = owl_uart_start_tx,
+	.stop_rx = owl_uart_stop_rx,
+	.stop_tx = owl_uart_stop_tx,
+	.startup = owl_uart_startup,
+	.shutdown = owl_uart_shutdown,
+	.set_termios = owl_uart_set_termios,
+	.type = owl_uart_type,
+	.config_port = owl_uart_config_port,
+	.request_port = owl_uart_request_port,
+	.release_port = owl_uart_release_port,
+	.verify_port = owl_uart_verify_port,
+};
+
 #ifdef CONFIG_SERIAL_OWL_CONSOLE
 
 static void owl_console_putchar(struct uart_port *port, int ch)
@@ -110,6 +546,57 @@ static void owl_uart_port_write(struct uart_port *port, const char *s,
 	local_irq_restore(flags);
 }
 
+static void owl_uart_console_write(struct console *co, const char *s,
+				   u_int count)
+{
+	struct owl_uart_port *owl_port;
+
+	owl_port = owl_uart_ports[co->index];
+	if (!owl_port)
+		return;
+
+	owl_uart_port_write(&owl_port->port, s, count);
+}
+
+static int owl_uart_console_setup(struct console *co, char *options)
+{
+	struct owl_uart_port *owl_port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= OWL_UART_PORT_NUM)
+		return -EINVAL;
+
+	owl_port = owl_uart_ports[co->index];
+	if (!owl_port || !owl_port->port.membase)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&owl_port->port, co, baud, parity, bits, flow);
+}
+
+static struct console owl_uart_console = {
+	.name = OWL_UART_DEV_NAME,
+	.write = owl_uart_console_write,
+	.device = uart_console_device,
+	.setup = owl_uart_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &owl_uart_driver,
+};
+
+static int __init owl_uart_console_init(void)
+{
+	register_console(&owl_uart_console);
+
+	return 0;
+}
+console_initcall(owl_uart_console_init);
+
 static void owl_uart_early_console_write(struct console *co,
 					 const char *s,
 					 u_int count)
@@ -132,4 +619,148 @@ owl_uart_early_console_setup(struct earlycon_device *device, const char *opt)
 OF_EARLYCON_DECLARE(owl, "actions,owl-uart",
 		    owl_uart_early_console_setup);
 
-#endif /* CONFIG_SERIAL_OWL_CONSOLE */
+#define OWL_UART_CONSOLE (&owl_uart_console)
+#else
+#define OWL_UART_CONSOLE NULL
+#endif
+
+static struct uart_driver owl_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "owl-uart",
+	.dev_name = OWL_UART_DEV_NAME,
+	.nr = OWL_UART_PORT_NUM,
+	.cons = OWL_UART_CONSOLE,
+};
+
+static const struct owl_uart_info owl_s500_info = {
+	.tx_fifosize = 16,
+};
+
+static const struct owl_uart_info owl_s900_info = {
+	.tx_fifosize = 32,
+};
+
+static const struct of_device_id owl_uart_dt_matches[] = {
+	{ .compatible = "actions,s500-uart", .data = &owl_s500_info },
+	{ .compatible = "actions,s900-uart", .data = &owl_s900_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, owl_uart_dt_matches);
+
+static int owl_uart_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct owl_uart_info *info = NULL;
+	struct resource *res_mem;
+	struct owl_uart_port *owl_port;
+	int ret, irq;
+
+	if (pdev->dev.of_node) {
+		pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
+		match = of_match_node(owl_uart_dt_matches, pdev->dev.of_node);
+		if (match)
+			info = match->data;
+	}
+
+	if (pdev->id < 0 || pdev->id >= OWL_UART_PORT_NUM) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(&pdev->dev, "could not get mem\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "could not get irq\n");
+		return irq;
+	}
+
+	if (owl_uart_ports[pdev->id]) {
+		dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
+		return -EBUSY;
+	}
+
+	owl_port = devm_kzalloc(&pdev->dev, sizeof(*owl_port), GFP_KERNEL);
+	if (!owl_port)
+		return -ENOMEM;
+
+	owl_port->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(owl_port->clk)) {
+		dev_err(&pdev->dev, "could not get clk\n");
+		return PTR_ERR(owl_port->clk);
+	}
+
+	owl_port->port.dev = &pdev->dev;
+	owl_port->port.line = pdev->id;
+	owl_port->port.type = PORT_OWL;
+	owl_port->port.iotype = UPIO_MEM;
+	owl_port->port.mapbase = res_mem->start;
+	owl_port->port.irq = irq;
+	owl_port->port.uartclk = clk_get_rate(owl_port->clk);
+	if (owl_port->port.uartclk == 0) {
+		dev_err(&pdev->dev, "clock rate is zero\n");
+		return -EINVAL;
+	}
+	owl_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY;
+	owl_port->port.x_char = 0;
+	owl_port->port.fifosize = (info) ? info->tx_fifosize : 16;
+	owl_port->port.ops = &owl_uart_ops;
+
+	owl_uart_ports[pdev->id] = owl_port;
+	platform_set_drvdata(pdev, owl_port);
+
+	ret = uart_add_one_port(&owl_uart_driver, &owl_port->port);
+	if (ret)
+		owl_uart_ports[pdev->id] = NULL;
+
+	return ret;
+}
+
+static int owl_uart_remove(struct platform_device *pdev)
+{
+	struct owl_uart_port *owl_port = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&owl_uart_driver, &owl_port->port);
+	owl_uart_ports[pdev->id] = NULL;
+
+	return 0;
+}
+
+static struct platform_driver owl_uart_platform_driver = {
+	.probe = owl_uart_probe,
+	.remove = owl_uart_remove,
+	.driver = {
+		.name = "owl-uart",
+		.of_match_table = owl_uart_dt_matches,
+	},
+};
+
+static int __init owl_uart_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&owl_uart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&owl_uart_platform_driver);
+	if (ret)
+		uart_unregister_driver(&owl_uart_driver);
+
+	return ret;
+}
+
+static void __init owl_uart_exit(void)
+{
+	platform_driver_unregister(&owl_uart_platform_driver);
+	uart_unregister_driver(&owl_uart_driver);
+}
+
+module_init(owl_uart_init);
+module_exit(owl_uart_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c34a2a3eeff5..38bea3217ead 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -70,6 +70,7 @@
 #define PORT_CLPS711X	33
 #define PORT_SA1100	34
 #define PORT_UART00	35
+#define PORT_OWL	36
 #define PORT_21285	37
 
 /* Sparc type numbers.  */
-- 
2.12.3

Powered by blists - more mailing lists