| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170710135618.13661-4-andrew@aj.id.au>
Date: Mon, 10 Jul 2017 23:26:17 +0930
From: Andrew Jeffery <andrew@...id.au>
To: linux@...ck-us.net, linux-hwmon@...r.kernel.org
Cc: Andrew Jeffery <andrew@...id.au>, jdelvare@...e.com,
linux-kernel@...r.kernel.org, joel@....id.au,
openbmc@...ts.ozlabs.org, msbarth@...ux.vnet.ibm.com,
mspinler@...ux.vnet.ibm.com
Subject: [RFC PATCH 3/4] pmbus: Allow dynamic fan coefficient values
Some PMBus chips, such as the MAX31785, use different coefficients for
FAN_COMMAND_[1-4] depending on whether the fan is in PWM (percent duty)
or RPM mode. Add a callback to allow the driver to provide the
applicable coefficients to avoid imposing on devices that don't have
this requirement.
Signed-off-by: Andrew Jeffery <andrew@...id.au>
---
drivers/hwmon/pmbus/pmbus.h | 18 +++++--
drivers/hwmon/pmbus/pmbus_core.c | 112 ++++++++++++++++++++++++++++++++-------
2 files changed, 108 insertions(+), 22 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 927eabc1b273..338ecc8b25a4 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -345,6 +345,12 @@ enum pmbus_sensor_classes {
enum pmbus_data_format { linear = 0, direct, vid };
enum vrm_version { vr11 = 0, vr12 };
+struct pmbus_coeffs {
+ int m; /* mantissa for direct data format */
+ int b; /* offset */
+ int R; /* exponent */
+};
+
struct pmbus_driver_info {
int pages; /* Total number of pages */
enum pmbus_data_format format[PSC_NUM_CLASSES];
@@ -353,9 +359,7 @@ struct pmbus_driver_info {
* Support one set of coefficients for each sensor type
* Used for chips providing data in direct mode.
*/
- int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */
- int b[PSC_NUM_CLASSES]; /* offset */
- int R[PSC_NUM_CLASSES]; /* exponent */
+ struct pmbus_coeffs coeffs[PSC_NUM_CLASSES];
u32 func[PMBUS_PAGES]; /* Functionality, per page */
/*
@@ -382,6 +386,14 @@ struct pmbus_driver_info {
int (*identify)(struct i2c_client *client,
struct pmbus_driver_info *info);
+ /*
+ * If a fan's coefficents change over time (e.g. between RPM and PWM
+ * mode), then the driver can provide a function for retrieving the
+ * currently applicable coefficients.
+ */
+ const struct pmbus_coeffs *(*get_fan_coeffs)(
+ const struct pmbus_driver_info *info, int index,
+ enum pmbus_fan_mode mode, int command);
/* Allow the driver to interpret the fan command value */
int (*get_pwm_mode)(int id, u8 fan_config, u16 fan_command);
int (*set_pwm_mode)(int id, long mode, u8 *fan_config,
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 3b0a55bbbd2c..4ff6a1fd5cce 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -58,10 +58,11 @@
struct pmbus_sensor {
struct pmbus_sensor *next;
char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */
- struct device_attribute attribute;
+ struct sensor_device_attribute attribute;
u8 page; /* page number */
u16 reg; /* register */
enum pmbus_sensor_classes class; /* sensor class */
+ const struct pmbus_coeffs *coeffs;
bool update; /* runtime sensor update needed */
int data; /* Sensor data.
Negative if there was a read error */
@@ -89,6 +90,7 @@ struct pmbus_fan_ctrl {
u8 id;
u8 config;
u16 command;
+ const struct pmbus_coeffs *coeffs;
};
#define to_pmbus_fan_ctrl_attr(_attr) \
container_of(_attr, struct pmbus_fan_ctrl_attr, attribute)
@@ -511,9 +513,15 @@ static long pmbus_reg2data_direct(struct pmbus_data *data,
long val = (s16) sensor->data;
long m, b, R;
- m = data->info->m[sensor->class];
- b = data->info->b[sensor->class];
- R = data->info->R[sensor->class];
+ if (sensor->coeffs) {
+ m = sensor->coeffs->m;
+ b = sensor->coeffs->b;
+ R = sensor->coeffs->R;
+ } else {
+ m = data->info->coeffs[sensor->class].m;
+ b = data->info->coeffs[sensor->class].b;
+ R = data->info->coeffs[sensor->class].R;
+ }
if (m == 0)
return 0;
@@ -663,9 +671,15 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data,
{
long m, b, R;
- m = data->info->m[sensor->class];
- b = data->info->b[sensor->class];
- R = data->info->R[sensor->class];
+ if (sensor->coeffs) {
+ m = sensor->coeffs->m;
+ b = sensor->coeffs->b;
+ R = sensor->coeffs->R;
+ } else {
+ m = data->info->coeffs[sensor->class].m;
+ b = data->info->coeffs[sensor->class].b;
+ R = data->info->coeffs[sensor->class].R;
+ }
/* Power is in uW. Adjust R and b. */
if (sensor->class == PSC_POWER) {
@@ -796,7 +810,9 @@ static ssize_t pmbus_show_sensor(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct pmbus_data *data = pmbus_update_device(dev);
- struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
+ struct pmbus_sensor *sensor;
+
+ sensor = to_pmbus_sensor(to_sensor_dev_attr(devattr));
if (sensor->data < 0)
return sensor->data;
@@ -810,12 +826,14 @@ static ssize_t pmbus_set_sensor(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
- struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
+ struct pmbus_sensor *sensor;
ssize_t rv = count;
long val = 0;
int ret;
u16 regval;
+ sensor = to_pmbus_sensor(to_sensor_dev_attr(devattr));
+
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
@@ -856,6 +874,7 @@ static ssize_t pmbus_show_fan_command(struct device *dev,
}
sensor.class = PSC_FAN;
+ sensor.coeffs = fan->coeffs;
if (mode == percent)
sensor.data = fan->command * 255 / 100;
else
@@ -882,6 +901,29 @@ static ssize_t pmbus_show_pwm(struct device *dev,
buf);
}
+static int pmbus_update_fan_coeffs(struct pmbus_data *data,
+ struct pmbus_fan_ctrl *fan,
+ enum pmbus_fan_mode mode)
+{
+ const struct pmbus_driver_info *info = data->info;
+ struct pmbus_sensor *curr = data->sensors;
+
+ fan->coeffs = info->get_fan_coeffs(info, fan->index, mode,
+ PMBUS_FAN_COMMAND_1 + fan->id);
+
+ while (curr) {
+ if (curr->class == PSC_FAN &&
+ curr->attribute.index == fan->index) {
+ curr->coeffs = info->get_fan_coeffs(info, fan->index,
+ mode, curr->reg);
+ }
+
+ curr = curr->next;
+ }
+
+ return 0;
+}
+
static ssize_t pmbus_set_fan_command(struct device *dev,
enum pmbus_fan_mode mode,
struct pmbus_fan_ctrl *fan,
@@ -889,6 +931,7 @@ static ssize_t pmbus_set_fan_command(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
int config_addr, command_addr;
struct pmbus_sensor sensor;
ssize_t rv;
@@ -899,7 +942,13 @@ static ssize_t pmbus_set_fan_command(struct device *dev,
mutex_lock(&data->update_lock);
+ if (info->format[PSC_FAN] == direct && info->get_fan_coeffs) {
+ pmbus_update_fan_coeffs(data, fan, mode);
+ sensor.coeffs = fan->coeffs;
+ }
+
sensor.class = PSC_FAN;
+ sensor.attribute.index = fan->index;
val = pmbus_data2reg(data, &sensor, val);
@@ -968,6 +1017,8 @@ static ssize_t pmbus_show_pwm_enable(struct device *dev,
struct pmbus_sensor sensor = {
.class = PSC_FAN,
.data = fan->command,
+ .attribute.index = fan->index,
+ .coeffs = fan->coeffs,
};
long command;
@@ -992,6 +1043,7 @@ static ssize_t pmbus_set_pwm_enable(struct device *dev,
struct pmbus_fan_ctrl *fan = pwm_enable_to_pmbus_fan_ctrl(da);
struct i2c_client *client = to_i2c_client(dev->parent);
struct pmbus_data *data = i2c_get_clientdata(client);
+ const struct pmbus_driver_info *info = data->info;
int config_addr, command_addr;
struct pmbus_sensor sensor;
ssize_t rv = count;
@@ -1003,15 +1055,21 @@ static ssize_t pmbus_set_pwm_enable(struct device *dev,
mutex_lock(&data->update_lock);
sensor.class = PSC_FAN;
+ sensor.attribute.index = fan->index;
+
+ if (info->format[PSC_FAN] == direct && info->get_fan_coeffs) {
+ pmbus_update_fan_coeffs(data, fan, percent);
+ sensor.coeffs = fan->coeffs;
+ }
config_addr = (fan->id < 2) ? PMBUS_FAN_CONFIG_12 : PMBUS_FAN_CONFIG_34;
command_addr = config_addr + 1 + (fan->id & 1);
- if (data->info->set_pwm_mode) {
+ if (info->set_pwm_mode) {
u8 config = PB_FAN_CONFIG_PUT(fan->id, fan->config);
u16 command = fan->command;
- rv = data->info->set_pwm_mode(fan->id, mode, &config, &command);
+ rv = info->set_pwm_mode(fan->id, mode, &config, &command);
if (rv < 0)
goto done;
@@ -1138,7 +1196,7 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
return NULL;
- a = &sensor->attribute;
+ a = &sensor->attribute.dev_attr;
snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
name, seq, type);
@@ -1146,9 +1204,9 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
sensor->reg = reg;
sensor->class = class;
sensor->update = update;
- pmbus_dev_attr_init(a, sensor->name,
+ pmbus_attr_init(&sensor->attribute, sensor->name,
readonly ? S_IRUGO : S_IRUGO | S_IWUSR,
- pmbus_show_sensor, pmbus_set_sensor);
+ pmbus_show_sensor, pmbus_set_sensor, seq);
if (pmbus_add_attribute(data, &a->attr))
return NULL;
@@ -1886,7 +1944,7 @@ static const u32 pmbus_fan_status_flags[] = {
/* Fans */
static int pmbus_add_fan_ctrl(struct i2c_client *client,
struct pmbus_data *data, int index, int page, int id,
- u8 config)
+ u8 config, const struct pmbus_coeffs *coeffs)
{
struct pmbus_fan_ctrl *fan;
int rv;
@@ -1898,6 +1956,7 @@ static int pmbus_add_fan_ctrl(struct i2c_client *client,
fan->index = index;
fan->page = page;
fan->id = id;
+ fan->coeffs = coeffs;
fan->config = config;
rv = _pmbus_read_word_data(client, page,
@@ -1921,6 +1980,8 @@ static int pmbus_add_fan_attributes(struct i2c_client *client,
struct pmbus_data *data)
{
const struct pmbus_driver_info *info = data->info;
+ const struct pmbus_coeffs *coeffs = NULL;
+ enum pmbus_fan_mode mode;
int index = 1;
int page;
int ret;
@@ -1929,6 +1990,7 @@ static int pmbus_add_fan_attributes(struct i2c_client *client,
int f;
for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
+ struct pmbus_sensor *sensor;
int regval;
if (!(info->func[page] & pmbus_fan_flags[f]))
@@ -1949,13 +2011,25 @@ static int pmbus_add_fan_attributes(struct i2c_client *client,
(!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
continue;
- if (pmbus_add_sensor(data, "fan", "input", index,
- page, pmbus_fan_registers[f],
- PSC_FAN, true, true) == NULL)
+ sensor = pmbus_add_sensor(data, "fan", "input", index,
+ page, pmbus_fan_registers[f],
+ PSC_FAN, true, true);
+ if (!sensor)
return -ENOMEM;
+ /* Add coeffs here as we have access to the fan mode */
+ if (info->format[PSC_FAN] == direct &&
+ info->get_fan_coeffs) {
+ const u16 mask = PB_FAN_1_RPM >> ((f & 1) * 4);
+
+ mode = (regval & mask) ? rpm : percent;
+ coeffs = info->get_fan_coeffs(info, index, mode,
+ pmbus_fan_registers[f]);
+ sensor->coeffs = coeffs;
+ }
+
ret = pmbus_add_fan_ctrl(client, data, index, page, f,
- regval);
+ regval, coeffs);
if (ret < 0)
return ret;
--
2.11.0
Powered by blists - more mailing lists