[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <36ad6ab0cf3051efeb02508141e08efd56761018.1499701282.git.joabreu@synopsys.com>
Date: Mon, 10 Jul 2017 16:46:52 +0100
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Jose Abreu <Jose.Abreu@...opsys.com>,
Carlos Palminha <CARLOS.PALMINHA@...opsys.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hans.verkuil@...co.com>,
Sylwester Nawrocki <snawrocki@...nel.org>,
devicetree@...r.kernel.org
Subject: [PATCH v8 2/5] dt-bindings: media: Document Synopsys Designware HDMI RX
Document the bindings for the Synopsys Designware HDMI RX.
Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: Carlos Palminha <palminha@...opsys.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: Hans Verkuil <hans.verkuil@...co.com>
Cc: Sylwester Nawrocki <snawrocki@...nel.org>
Cc: devicetree@...r.kernel.org
Changes from v7:
- Remove SoC specific bindings (Rob)
Changes from v6:
- Document which properties are required/optional (Sylwester)
- Drop compatible string for SoC (Sylwester)
- Reword edid-phandle property (Sylwester)
- Typo fixes (Sylwester)
Changes from v4:
- Use "cfg" instead of "cfg-clk" (Rob)
- Change node names (Rob)
Changes from v3:
- Document the new DT bindings suggested by Sylwester
Changes from v2:
- Document edid-phandle property
---
.../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 ++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
new file mode 100644
index 0000000..1dc09c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
@@ -0,0 +1,58 @@
+Synopsys DesignWare HDMI RX Decoder
+===================================
+
+This document defines device tree properties for the Synopsys DesignWare HDMI
+RX Decoder (DWC HDMI RX).
+
+The properties bellow belong to the Synopsys DesignWare HDMI RX Decoder node.
+
+Required properties:
+
+- compatible: Shall be "snps,dw-hdmi-rx".
+- reg: Memory mapped base address and length of the DWC HDMI RX registers.
+- interrupts: Reference to the DWC HDMI RX interrupt and the HDMI 5V sense
+interrupt.
+- clocks: Reference to the config clock.
+- clock-names: Shall be "cfg".
+- #address-cells: Shall be 1.
+- #size-cells: Shall be 0.
+
+Optional properties:
+
+- edid-phandle: Reference to the EDID handler block; if this property is not
+specified it is assumed that EDID is handled by device described by parent
+node of the HDMI RX node. You should not specify this property if your HDMI RX
+controller does not have CEC.
+
+You also have to create a subnode for the PHY device. PHY node properties are
+as follows.
+
+Required properties:
+
+- compatible: Shall be "snps,dw-hdmi-phy-e405".
+- reg: Shall be the JTAG address of the PHY.
+- clocks: Reference to the config clock.
+- clock-names: Shall be "cfg".
+
+Example:
+
+hdmi_rx: hdmi-rx@0 {
+ compatible = "snps,dw-hdmi-rx";
+ reg = <0x0 0x10000>;
+ interrupts = <1 2>;
+ edid-phandle = <&dw_hdmi_edid>;
+
+ clocks = <&dw_hdmi_refclk>;
+ clock-names = "cfg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-phy@fc {
+ compatible = "snps,dw-hdmi-phy-e405";
+ reg = <0xfc>;
+
+ clocks = <&dw_hdmi_refclk>;
+ clock-names = "cfg";
+ };
+};
--
1.9.1
Powered by blists - more mailing lists