[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170711144110.jrqjr6gbkkdadqer@earth>
Date: Tue, 11 Jul 2017 16:41:10 +0200
From: Sebastian Reichel <sebastian.reichel@...labora.co.uk>
To: Tony Lindgren <tony@...mide.com>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Linus Torvalds <torvalds@...ux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Ingo Molnar <mingo@...nel.org>,
"H. Peter Anvin" <hpa@...or.com>, Pavel Machek <pavel@....cz>,
Linus Walleij <linus.walleij@...aro.org>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: Re: [GIT pull] irq updates for 4.13
Hi,
On Tue, Jul 11, 2017 at 06:51:32AM -0700, Tony Lindgren wrote:
> * Thomas Gleixner <tglx@...utronix.de> [170711 02:48]:
> > On Tue, 11 Jul 2017, Thomas Gleixner wrote:
> >
> > So Tony actually provided the part of dmesg which shows the initial
> > failure, which subsequently leads to the splat Sebastian reported.
> >
> > Unhandled fault: external abort on non-linefetch (0x1028) at 0xfb050034
> > pgd = c0004000 [fb050034] *pgd=49011452(bad)
> > Internal error: : 1028 [#1] SMP ARM
> > Workqueue: events deferred_probe_work_func
> > task: ce1d41c0 task.stack: ce1fc000
> > PC is at omap_gpio_get_direction+0x2c/0x44
> > LR is at _raw_spin_lock_irqsave+0x40/0x4c
> > pc : [<c0509258>] lr : [<c08263c4>] psr: 60000093
> > sp : ce1fdb78 ip : c0dce42c fp : ce22d810
> > r10: ce22d800 r9 : 00000000 r8 : ce22d900
> > r7 : 00000016 r6 : ce223864 r5 : fb050034 r4 : 00000020
> > r3 : ce1d41c0 r2 : 00000000 r1 : a0000013 r0 : a0000013
> > Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
> > Control: 10c5387d Table: 80004019 DAC: 00000051
> > Process kworker/0:1 (pid: 14, stack limit = 0xce1fc218)
> >
> > The callstack is:
> >
> > omap_gpio_get_direction
> > gpiochip_lock_as_irq
> > gpiochip_irq_reqres
> > __setup_irq
> > request_threaded_irq
> > smc_probe
> > smc_drv_probe
> > platform_drv_probe
> > ....
> >
> > So the SMC91X network driver request an IRQ, which ends up calling into the
> > GPIO interrupt setup and that fails. I have no idea why that would not fail
> > with the patch reverted. Dusting off a Beaglebone board....
>
> And "external abort on non-linefetch" means something is not clocked
> in this case. The following alone makes things boot for me again, but I don't
> quite follow what has now changed with the ordering.. Thomas, any ideas?
>
> Anyways, adding Linus W and Grygorii to Cc since things now point to
> gpio-omap.
>
> Regards,
>
> Tony
Ack, that also works for me. The strange thing is, that I added the
following before and it did not print anything.
if (!pm_runtime_enabled(bank->chip.parent))
dev_err(bank->chip.parent, "runtime pm issue!\n");
-- Sebastian
> 8< ---------------------
> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
> --- a/drivers/gpio/gpio-omap.c
> +++ b/drivers/gpio/gpio-omap.c
> @@ -919,13 +919,24 @@ static int omap_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
> struct gpio_bank *bank;
> unsigned long flags;
> void __iomem *reg;
> - int dir;
> + int error, dir;
>
> bank = gpiochip_get_data(chip);
> reg = bank->base + bank->regs->direction;
> + error = pm_runtime_get_sync(bank->chip.parent);
> + if (error < 0) {
> + dev_err(bank->chip.parent,
> + "Could not enable gpio bank %p: %d\n",
> + bank, error);
> + pm_runtime_put_noidle(bank->chip.parent);
> +
> + return error;
> + }
> raw_spin_lock_irqsave(&bank->lock, flags);
> dir = !!(readl_relaxed(reg) & BIT(offset));
> raw_spin_unlock_irqrestore(&bank->lock, flags);
> + pm_runtime_put_sync(bank->chip.parent);
> +
> return dir;
> }
>
> --
> 2.13.2
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists