| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1dUwNu-0005Q8-HY@debutante>
Date: Tue, 11 Jul 2017 15:43:30 +0100
From: Mark Brown <broonie@...nel.org>
To: jiada wang <jiada_wang@...tor.com>
Cc: Jiada Wang <jiada_wang@...tor.com>, Rob Herring <robh@...nel.org>,
Mark Brown <broonie@...nel.org>, broonie@...nel.org,
robh+dt@...nel.org, mark.rutland@....com, shawnguo@...nel.org,
kernel@...gutronix.de, fabio.estevam@....com,
linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-spi@...r.kernel.org
Subject: Applied "spi: imx: add selection for iMX53 and iMX6 controller" to the spi tree
The patch
spi: imx: add selection for iMX53 and iMX6 controller
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 65c60d7184df14be97d82fee77810901579493aa Mon Sep 17 00:00:00 2001
From: jiada wang <jiada_wang@...tor.com>
Date: Thu, 8 Jun 2017 14:16:01 +0900
Subject: [PATCH] spi: imx: add selection for iMX53 and iMX6 controller
ECSPI contorller for iMX53 and iMX6 has few hardware issues
comparing to iMX51.
The change add possibility to detect which controller is used
to apply possible workaround and limitations.
Signed-off-by: Jiada Wang <jiada_wang@...tor.com>
Acked-by: Rob Herring <robh@...nel.org>
Reviewed-by: Sascha Hauer <s.hauer@...gutronix.de>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
drivers/spi/spi-imx.c | 26 ++++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 31b5b21598ff..5bf13960f7f4 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -9,6 +9,7 @@ Required properties:
- "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
- "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
- "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
+ - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
- reg : Offset and length of the register set for the device
- interrupts : Should contain CSPI/eCSPI interrupt
- cs-gpios : Specifies the gpio pins to be used for chipselects.
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index d3093f355dfb..424dd013451e 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -63,7 +63,8 @@ enum spi_imx_devtype {
IMX27_CSPI,
IMX31_CSPI,
IMX35_CSPI, /* CSPI on all i.mx except above */
- IMX51_ECSPI, /* ECSPI on i.mx51 and later */
+ IMX51_ECSPI, /* ECSPI on i.mx51 */
+ IMX53_ECSPI, /* ECSPI on i.mx53 and later */
};
struct spi_imx_data;
@@ -127,6 +128,11 @@ static inline int is_imx51_ecspi(struct spi_imx_data *d)
return d->devtype_data->devtype == IMX51_ECSPI;
}
+static inline int is_imx53_ecspi(struct spi_imx_data *d)
+{
+ return d->devtype_data->devtype == IMX53_ECSPI;
+}
+
#define MXC_SPI_BUF_RX(type) \
static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
{ \
@@ -752,6 +758,17 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
.devtype = IMX51_ECSPI,
};
+static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
+ .intctrl = mx51_ecspi_intctrl,
+ .config = mx51_ecspi_config,
+ .trigger = mx51_ecspi_trigger,
+ .rx_available = mx51_ecspi_rx_available,
+ .reset = mx51_ecspi_reset,
+ .fifo_size = 64,
+ .has_dmamode = true,
+ .devtype = IMX53_ECSPI,
+};
+
static const struct platform_device_id spi_imx_devtype[] = {
{
.name = "imx1-cspi",
@@ -772,6 +789,9 @@ static const struct platform_device_id spi_imx_devtype[] = {
.name = "imx51-ecspi",
.driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data,
}, {
+ .name = "imx53-ecspi",
+ .driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data,
+ }, {
/* sentinel */
}
};
@@ -783,6 +803,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
{ .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, },
{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
+ { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
@@ -1218,7 +1239,8 @@ static int spi_imx_probe(struct platform_device *pdev)
spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
+ if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) ||
+ is_imx53_ecspi(spi_imx))
spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
spi_imx->spi_drctl = spi_drctl;
--
2.13.2
Powered by blists - more mailing lists