lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170713092144.31751508094@solo.franken.de>
Date:   Thu, 13 Jul 2017 10:57:40 +0200
From:   Thomas Bogendoerfer <tsbogend@...ha.franken.de>
To:     isubramanian@....com, kchudgar@....com, qnguyen@....com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH net] xgene: Don't fail probe, if there is no clk resource for SGMII interfaces

From: Thomas Bogendoerfer <tbogendoerfer@...e.de>

This change fixes following problem

[    1.827940] xgene-enet: probe of 1f210030.ethernet failed with error -2

which leads to a missing ethernet interface (reproducable at least on
Gigabyte MP30-AR0 and APM Mustang systems).

The check for a valid clk resource fails, because DT doesn't provide a
clock for sgenet1. But the driver doesn't use this clk, if the ethernet
port is connected via SGMII. Therefore this patch avoids probing for clk
on SGMII interfaces.

Fixes: 9aea7779b764 drivers: net: xgene: Fix crash on DT systems
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@...e.de>
---
 drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index d3906f6b01bd..86058a9f3417 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -1785,16 +1785,18 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
 
 	xgene_enet_gpiod_get(pdata);
 
-	pdata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pdata->clk)) {
-		/* Abort if the clock is defined but couldn't be retrived.
-		 * Always abort if the clock is missing on DT system as
-		 * the driver can't cope with this case.
-		 */
-		if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
-			return PTR_ERR(pdata->clk);
-		/* Firmware may have set up the clock already. */
-		dev_info(dev, "clocks have been setup already\n");
+	if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
+		pdata->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(pdata->clk)) {
+			/* Abort if the clock is defined but couldn't be
+			 * retrived. Always abort if the clock is missing on
+			 * DT system as the driver can't cope with this case.
+			 */
+			if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
+				return PTR_ERR(pdata->clk);
+			/* Firmware may have set up the clock already. */
+			dev_info(dev, "clocks have been setup already\n");
+		}
 	}
 
 	if (pdata->phy_mode != PHY_INTERFACE_MODE_XGMII)
-- 
2.12.3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ