| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1499946435-7177-3-git-send-email-aisheng.dong@nxp.com>
Date: Thu, 13 Jul 2017 19:47:07 +0800
From: Dong Aisheng <aisheng.dong@....com>
To: <linux-clk@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <sboyd@...eaurora.org>,
<mturquette@...libre.com>, <aisheng.dong@....com>,
<dongas86@...il.com>, <shawnguo@...nel.org>, <Anson.Huang@....com>,
<ping.bai@....com>
Subject: [PATCH V2 02/10] clk: reparent orphans after critical clocks enabled
The orphan clocks reparent operation should be moved after the critical
clocks enabled, otherwise it may get a chance to disable a newly
registered critical clock which triggers the following warning.
Assuming we have two clocks: A and B, B is the parent of A.
Clock A has flag: CLK_OPS_PARENT_ENABLE
Clock B has flag: CLK_IS_CRITICAL
Step 1:
Clock A is registered, then it becomes orphan.
Step 2:
Clock B is registered. Before clock B reach the critical clock enable
operation, orphan A will find the newly registered parent B and do
reparent operation, then parent B will be finally disabled in
__clk_set_parent_after() due to CLK_OPS_PARENT_ENABLE flag as there's
still no users of B which will then trigger the following warning.
[ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/clk/clk.c:597 clk_core_disable+0xb4/0xe0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00056-gdff1f66-dirty #1373
[ 0.000000] Hardware name: Generic DT based system
[ 0.000000] Backtrace:
[ 0.000000] [<c010c4bc>] (dump_backtrace) from [<c010c764>] (show_stack+0x18/0x1c)
[ 0.000000] r6:600000d3 r5:00000000 r4:c0e26358 r3:00000000
[ 0.000000] [<c010c74c>] (show_stack) from [<c040599c>] (dump_stack+0xb4/0xe8)
[ 0.000000] [<c04058e8>] (dump_stack) from [<c0125c94>] (__warn+0xd8/0x104)
[ 0.000000] r10:c0c21cd0 r9:c048aa78 r8:00000255 r7:00000009 r6:c0c1cd90 r5:00000000
[ 0.000000] r4:00000000 r3:c0e01d34
[ 0.000000] [<c0125bbc>] (__warn) from [<c0125d74>] (warn_slowpath_null+0x28/0x30)
[ 0.000000] r9:00000000 r8:ef00bf80 r7:c165ac4c r6:ef00bf80 r5:ef00bf80 r4:ef00bf80
[ 0.000000] [<c0125d4c>] (warn_slowpath_null) from [<c048aa78>] (clk_core_disable+0xb4/0xe0)
[ 0.000000] [<c048a9c4>] (clk_core_disable) from [<c048be88>] (clk_core_disable_lock+0x20/0x2c)
[ 0.000000] r4:000000d3 r3:c0e0af00
[ 0.000000] [<c048be68>] (clk_core_disable_lock) from [<c048c224>] (clk_core_disable_unprepare+0x14/0x28)
[ 0.000000] r5:00000000 r4:ef00bf80
[ 0.000000] [<c048c210>] (clk_core_disable_unprepare) from [<c048c270>] (__clk_set_parent_after+0x38/0x54)
[ 0.000000] r4:ef00bd80 r3:000010a0
[ 0.000000] [<c048c238>] (__clk_set_parent_after) from [<c048daa8>] (clk_register+0x4d0/0x648)
[ 0.000000] r6:ef00d500 r5:ef00bf80 r4:ef00bd80 r3:ef00bfd4
[ 0.000000] [<c048d5d8>] (clk_register) from [<c048dc30>] (clk_hw_register+0x10/0x1c)
[ 0.000000] r9:00000000 r8:00000003 r7:00000000 r6:00000824 r5:00000001 r4:ef00d500
[ 0.000000] [<c048dc20>] (clk_hw_register) from [<c048e698>] (_register_divider+0xcc/0x120)
[ 0.000000] [<c048e5cc>] (_register_divider) from [<c048e730>] (clk_register_divider+0x44/0x54)
[ 0.000000] r10:00000004 r9:00000003 r8:00000001 r7:00000000 r6:00000003 r5:00000001
[ 0.000000] r4:f0810030
[ 0.000000] [<c048e6ec>] (clk_register_divider) from [<c0d3ff58>] (imx7ulp_clocks_init+0x558/0xe98)
[ 0.000000] r7:c0e296f8 r6:c165c808 r5:00000000 r4:c165c808
[ 0.000000] [<c0d3fa00>] (imx7ulp_clocks_init) from [<c0d24db0>] (of_clk_init+0x118/0x1e0)
[ 0.000000] r10:00000001 r9:c0e01f68 r8:00000000 r7:c0e01f60 r6:ef7f8974 r5:ef0035c0
[ 0.000000] r4:00000006
[ 0.000000] [<c0d24c98>] (of_clk_init) from [<c0d04a50>] (time_init+0x2c/0x38)
[ 0.000000] r10:efffed40 r9:c0d61a48 r8:c0e78000 r7:c0e07900 r6:ffffffff r5:c0e78000
[ 0.000000] r4:00000000
[ 0.000000] [<c0d04a24>] (time_init) from [<c0d00b8c>] (start_kernel+0x218/0x394)
[ 0.000000] [<c0d00974>] (start_kernel) from [<6000807c>] (0x6000807c)
[ 0.000000] r10:00000000 r9:410fc075 r8:6000406a r7:c0e0c930 r6:c0d61a44 r5:c0e07918
[ 0.000000] r4:c0e78294
[ 0.000000] ---[ end trace 0000000000000000 ]---
Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Cc: Stephen Boyd <sboyd@...eaurora.org>
Cc: Michael Turquette <mturquette@...libre.com>
Cc: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@....com>
---
ChangeLog:
v1->v2:
* add more detailed commit messages
---
drivers/clk/clk.c | 39 ++++++++++++++++++++-------------------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index fc58c52..e2955b1 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2471,25 +2471,6 @@ static int __clk_core_init(struct clk_core *core)
core->rate = core->req_rate = rate;
/*
- * walk the list of orphan clocks and reparent any that newly finds a
- * parent.
- */
- hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
- struct clk_core *parent = __clk_init_parent(orphan);
-
- /*
- * we could call __clk_set_parent, but that would result in a
- * redundant call to the .set_rate op, if it exists
- */
- if (parent) {
- __clk_set_parent_before(orphan, parent);
- __clk_set_parent_after(orphan, parent, NULL);
- __clk_recalc_accuracies(orphan);
- __clk_recalc_rates(orphan, 0);
- }
- }
-
- /*
* optional platform-specific magic
*
* The .init callback is not used by any of the basic clock types, but
@@ -2511,6 +2492,26 @@ static int __clk_core_init(struct clk_core *core)
}
kref_init(&core->ref);
+
+ /*
+ * walk the list of orphan clocks and reparent any that newly finds a
+ * parent.
+ */
+ hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
+ struct clk_core *parent = __clk_init_parent(orphan);
+
+ /*
+ * we could call __clk_set_parent, but that would result in a
+ * redundant call to the .set_rate op, if it exists
+ */
+ if (parent) {
+ __clk_set_parent_before(orphan, parent);
+ __clk_set_parent_after(orphan, parent, NULL);
+ __clk_recalc_accuracies(orphan);
+ __clk_recalc_rates(orphan, 0);
+ }
+ }
+
out:
clk_prepare_unlock();
--
2.7.4
Powered by blists - more mailing lists