[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3BB206AB2B1BD448954845CE6FF69A8E0182B4C0ED@nt-mail04>
Date: Thu, 13 Jul 2017 03:00:35 +0000
From: Patrick Brünn <P.Bruenn@...khoff.com>
To: Andrew Lunn <andrew@...n.ch>,
linux-kernel-dev <linux-kernel-dev@...khoff.com>
CC: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux@...linux.org.uk" <linux@...linux.org.uk>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"fabio.estevam@....com" <fabio.estevam@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree
>From: Andrew Lunn [mailto:andrew@...n.ch]
>Sent: Mittwoch, 12. Juli 2017 16:43
>
>On Wed, Jul 12, 2017 at 11:04:08AM +0200, linux-kernel-dev@...khoff.com
>wrote:
>> From: Patrick Brünn <p.bruenn@...khoff.com>
>>
>> The CX9020 differs from i.MX53 Quick Start Board by:
>> - use uart2 instead of uart1
>> - DVI-D connector instead of VGA
>> - no audio
>> - CCAT FPGA connected to emi
>> - enable rtc
>>
>> Signed-off-by: Patrick Brünn <p.bruenn@...khoff.com>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/imx53-cx9020.dts | 377
>+++++++++++++++++++++++++++++++++++++
>> 2 files changed, 378 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 9c5e1d944d1c..ea60698f9783 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
>> imx53-ard.dtb \
>> imx53-m53evk.dtb \
>> imx53-mba53.dtb \
>> + imx53-cx9020.dtb \
>> imx53-qsb.dtb \
>> imx53-qsrb.dtb \
>> imx53-smd.dtb \
>
>Hi Patrick
>
>It appears this list is in alphabetic order...
>
Ops, thanks for the hint, will fix this with the next version.
Patrick
Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff
Registered office: Verl, Germany | Register court: Guetersloh HRA 7075
Powered by blists - more mailing lists