[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1500014949-15108-1-git-send-email-ran.wang_1@nxp.com>
Date: Fri, 14 Jul 2017 14:49:09 +0800
From: Ran Wang <ran.wang_1@....com>
To: Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>
CC: Tang Yuantian <Yuantian.Tang@....com>,
Horia Geantă <horia.geanta@....com>,
Marc Zyngier <marc.zyngier@....com>,
Mihai Bantea <mihai.bantea@....com>,
Scott Wood <oss@...error.net>, Liu Gang <Gang.Liu@....com>,
York Sun <york.sun@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM64 PORT (AARCH64 ARCHITECTURE)"
<linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>,
Ran Wang <ran.wang_1@....com>
Subject: [PATCH v2] arm64: dts: ls1012a: add USB host controller nodes
LS1012A has one USB 3.0(DWC3) controller and
one USB 2.0 controller.
Signed-off-by: Ran Wang <ran.wang_1@....com>
---
Change in v2:
Move node usb2@...0000 to the back of sata@...0000 to keep nodes
sorted in unit-address.
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b1554cb..df83915 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,6 +444,15 @@
<&clockgen 4 3>;
};
+ usb0: usb3@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
sata: sata@...0000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
@@ -454,5 +463,13 @@
dma-coherent;
status = "disabled";
};
+
+ usb1: usb2@...0000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <0 139 0x4>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
};
};
--
2.1.0.27.g96db324
Powered by blists - more mailing lists