linux-kernel - [PATCH v7 08/13] x86/ioapic: Refactor the delay logic in timer_irq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1500011554-9784-9-git-send-email-douly.fnst@cn.fujitsu.com>
Date:   Fri, 14 Jul 2017 13:52:29 +0800
From:   Dou Liyang <douly.fnst@...fujitsu.com>
To:     <x86@...nel.org>, <linux-kernel@...r.kernel.org>
CC:     <tglx@...utronix.de>, <mingo@...nel.org>, <hpa@...or.com>,
        <ebiederm@...ssion.com>, <bhe@...hat.com>, <peterz@...radead.org>,
        <izumi.taku@...fujitsu.com>, <tokunaga.keiich@...fujitsu.com>,
        Dou Liyang <douly.fnst@...fujitsu.com>
Subject: [PATCH v7 08/13] x86/ioapic: Refactor the delay logic in timer_irq_works()

Kernel use timer_irq_works() to detects the timer IRQs. It calls
mdelay(10) to delay ten ticks and check whether the timer IRQ work
or not. The mdelay() depends on the loops_per_jiffy which is set up
in calibrate_delay(). Current kernel defaults the IRQ 0 is available
when it calibrates delay.

But it is wrong in the dump-capture kernel with 'notsc' option inherited
from 1st kernel option. dump-capture kernel can't make sure the timer IRQ
works well.

The correct design is making the interrupt mode setup and checking timer
IRQ works in advance of calibrate_delay(). That results in the mdelay()
being unusable in timer_irq_works().

Preparatory patch to make the setup in advance. Refactor the delay logic
by waiting for some cycles. In the system with X86_FEATURE_TSC feature,
Use rdtsc(), others will call __delay() directly.

Note: regard 4G as the max CPU frequence of current single CPU.

Signed-off-by: Dou Liyang <douly.fnst@...fujitsu.com>
---
 arch/x86/kernel/apic/io_apic.c | 45 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 43 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b4f5f73..a87a4ba 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1585,6 +1585,43 @@ static int __init notimercheck(char *s)
 }
 __setup("no_timer_check", notimercheck);
 
+static void __init delay_with_tsc(void)
+{
+	unsigned long long start, now;
+	unsigned long end = jiffies + 4;
+
+	start = rdtsc();
+
+	/*
+	 * We don't know the TSC frequency yet, but waiting for
+	 * 40000000000/HZ TSC cycles is safe:
+	 * 4 GHz == 10 jiffies
+	 * 1 GHz == 40 jiffies
+	 */
+	do {
+		rep_nop();
+		now = rdtsc();
+	} while ((now - start) < 40000000000UL / HZ &&
+		time_before_eq(jiffies, end));
+}
+
+static void __init delay_without_tsc(void)
+{
+	unsigned long end = jiffies + 4;
+	int band = 1;
+
+	/*
+	 * We don't know any frequency yet, but waiting for
+	 * 40940000000/HZ cycles is safe:
+	 * 4 GHz == 10 jiffies
+	 * 1 GHz == 40 jiffies
+	 * 1 << 1 + 1 << 2 +...+ 1 << 11 = 4094
+	 */
+	do {
+		__delay(((1U << band++) * 10000000UL) / HZ);
+	} while (band < 12 && time_before_eq(jiffies, end));
+}
+
 /*
  * There is a nasty bug in some older SMP boards, their mptable lies
  * about the timer IRQ. We do the following to work around the situation:
@@ -1603,8 +1640,12 @@ static int __init timer_irq_works(void)
 
 	local_save_flags(flags);
 	local_irq_enable();
-	/* Let ten ticks pass... */
-	mdelay((10 * 1000) / HZ);
+
+	if (boot_cpu_has(X86_FEATURE_TSC))
+		delay_with_tsc();
+	else
+		delay_without_tsc();
+
 	local_irq_restore(flags);
 
 	/*
-- 
2.5.5