linux-kernel - [PATCH for v4.9 LTS 69/87] phy state machine: failsafe leave invalid RUNNING state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170715012538.10101-69-alexander.levin@verizon.com>
Date:   Sat, 15 Jul 2017 01:26:21 +0000
From:   "Levin, Alexander (Sasha Levin)" <alexander.levin@...izon.com>
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
Cc:     Zefir Kurtisi <zefir.kurtisi@...atec.com>,
        "David S . Miller" <davem@...emloft.net>,
        "Levin, Alexander (Sasha Levin)" <alexander.levin@...izon.com>
Subject: [PATCH for v4.9 LTS 69/87] phy state machine: failsafe leave invalid
 RUNNING state

From: Zefir Kurtisi <zefir.kurtisi@...atec.com>

[ Upstream commit 811a919135b980bac8009d042acdccf10dc1ef5e ]

While in RUNNING state, phy_state_machine() checks for link changes by
comparing phydev->link before and after calling phy_read_status().
This works as long as it is guaranteed that phydev->link is never
changed outside the phy_state_machine().

If in some setups this happens, it causes the state machine to miss
a link loss and remain RUNNING despite phydev->link being 0.

This has been observed running a dsa setup with a process continuously
polling the link states over ethtool each second (SNMPD RFC-1213
agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET
causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to
call phy_read_status() and with that modify the link status - and
with that bricking the phy state machine.

This patch adds a fail-safe check while in RUNNING, which causes to
move to CHANGELINK when the link is gone and we are still RUNNING.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@...atec.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
---
 drivers/net/phy/phy.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index edd30ebbf275..6e12401b5102 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1060,6 +1060,15 @@ void phy_state_machine(struct work_struct *work)
 			if (old_link != phydev->link)
 				phydev->state = PHY_CHANGELINK;
 		}
+		/*
+		 * Failsafe: check that nobody set phydev->link=0 between two
+		 * poll cycles, otherwise we won't leave RUNNING state as long
+		 * as link remains down.
+		 */
+		if (!phydev->link && phydev->state == PHY_RUNNING) {
+			phydev->state = PHY_CHANGELINK;
+			phydev_err(phydev, "no link in PHY_RUNNING\n");
+		}
 		break;
 	case PHY_CHANGELINK:
 		err = phy_read_status(phydev);
-- 
2.11.0