linux-kernel - Re: [PATCH 0/2] use correct values for startup time bits for AXP22X/AXP8XX PEKs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170718071847.bkujmrmna72wqwb7@dell>
Date:   Tue, 18 Jul 2017 08:18:47 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Quentin Schulz <quentin.schulz@...e-electrons.com>
Cc:     dmitry.torokhov@...il.com, wens@...e.org, hdegoede@...hat.com,
        linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
        thomas.petazzoni@...e-electrons.com,
        maxime.ripard@...e-electrons.com
Subject: Re: [PATCH 0/2] use correct values for startup time bits for
 AXP22X/AXP8XX PEKs

On Mon, 17 Jul 2017, Quentin Schulz wrote:

> Hi all,
> 
> On 17/07/2017 11:53, Quentin Schulz wrote:
> > According to their datasheets, the AXP221, AXP223, AXP288, AXP803,
> > AXP809 and AXP813 PEK have different values for startup time bits from
> > the AXP20X PEK (which are currently used for all the aforementioned PMICs).
> > 
> > This patch series adds support for platform_device_id to axp20x-pek driver
> > to support different startup time bits depending on PMIC's variant and set
> > the correct platform_device_id in the mfd.
> > 
> > This has been tested on AXP813. To perform the test, modify the value of
> > startup and/or shutdown of the pek in sysfs. Press the button soldered to
> > PEK input of the AXP the amount of time you set in sysfs. The PMIC shuts
> > down the board without needing to unplug any power supply. Press PEK button
> > the amount of time you set in sysfs for startup and the PMIC will start the
> > board. Note that the time bits are obivoulsy hardware reset to their
> > default when you unplug all power supplies from the board.
> > 
> 
> I forgot to add that it depends on this patch series (particularly the
> third patch (3/6) "mfd: axp20x: Add support for AXP813 PMIC") from
> Chen-Yu:
> https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1428284.html

So you are going to re-send?

> > Quentin Schulz (2):
> >   Input: axp20x-pek: add support for AXP221 PEK
> >   mfd: axp20x: use correct platform device id for many PEK
> > 
> >  drivers/input/misc/axp20x-pek.c | 62 ++++++++++++++++++++++++++++++++++-------
> >  drivers/mfd/axp20x.c            | 12 ++++----
> >  2 files changed, 58 insertions(+), 16 deletions(-)
> > 
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog