| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1500378232-21424-3-git-send-email-philippe.cornu@st.com>
Date: Tue, 18 Jul 2017 13:43:52 +0200
From: Philippe CORNU <philippe.cornu@...com>
To: Archit Taneja <architt@...eaurora.org>,
Andrzej Hajda <a.hajda@...sung.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
David Airlie <airlied@...ux.ie>,
Philippe CORNU <philippe.cornu@...com>,
<dri-devel@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>
CC: Yannick Fertre <yannick.fertre@...com>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Vincent Abriou <vincent.abriou@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Gabriel Fernandez <gabriel.fernandez@...com>,
Ludovic Barre <ludovic.barre@...com>,
Fabien Dessenne <fabien.dessenne@...com>,
Mickael Reulier <mickael.reulier@...com>
Subject: [PATCH v1 2/2] drm/bridge/synopsys: dsi: Register list clean up
This patch cleans up the Synopsys mipi dsi register list:
- remove unused registers
- rename registers according to the Synopsys documentation
(1.30 & 1.31)
- fix typos
- re-order registers for a better coherency
Signed-off-by: Philippe CORNU <philippe.cornu@...com>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 77 ++++++++++++---------------
1 file changed, 33 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 63c7a01..c777ee3 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -35,14 +35,14 @@
#define POWERUP BIT(0)
#define DSI_CLKMGR_CFG 0x08
-#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8)
-#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0)
+#define TO_CLK_DIVISION(div) (((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVISION(div) ((div) & 0xff)
#define DSI_DPI_VCID 0x0c
-#define DPI_VID(vid) (((vid) & 0x3) << 0)
+#define DPI_VCID(vid) ((vid) & 0x3)
#define DSI_DPI_COLOR_CODING 0x10
-#define EN18_LOOSELY BIT(8)
+#define LOOSELY18_EN BIT(8)
#define DPI_COLOR_CODING_16BIT_1 0x0
#define DPI_COLOR_CODING_16BIT_2 0x1
#define DPI_COLOR_CODING_16BIT_3 0x2
@@ -61,22 +61,18 @@
#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16)
#define INVACT_LPCMD_TIME(p) ((p) & 0xff)
-#define DSI_DBI_CFG 0x20
-#define DSI_DBI_CMDSIZE 0x28
-
#define DSI_PCKHDL_CFG 0x2c
-#define EN_CRC_RX BIT(4)
-#define EN_ECC_RX BIT(3)
-#define EN_BTA BIT(2)
-#define EN_EOTP_RX BIT(1)
-#define EN_EOTP_TX BIT(0)
+#define CRC_RX_EN BIT(4)
+#define ECC_RX_EN BIT(3)
+#define BTA_EN BIT(2)
+#define EOTP_RX_EN BIT(1)
+#define EOTP_TX_EN BIT(0)
#define DSI_MODE_CFG 0x34
#define ENABLE_VIDEO_MODE 0
#define ENABLE_CMD_MODE BIT(0)
#define DSI_VID_MODE_CFG 0x38
-#define FRAME_BTA_ACK BIT(14)
#define ENABLE_LOW_POWER (0x3f << 8)
#define ENABLE_LOW_POWER_MASK (0x3f << 8)
#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES 0x0
@@ -85,8 +81,7 @@
#define VID_MODE_TYPE_MASK 0x3
#define DSI_VID_PKT_SIZE 0x3c
-#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0)
-#define VID_PKT_MAX_SIZE 0x3fff
+#define VID_PKT_SIZE(p) ((p) & 0x3fff)
#define DSI_VID_HSA_TIME 0x48
#define DSI_VID_HBP_TIME 0x4c
@@ -108,8 +103,8 @@
#define GEN_SW_2P_TX_LP BIT(10)
#define GEN_SW_1P_TX_LP BIT(9)
#define GEN_SW_0P_TX_LP BIT(8)
-#define EN_ACK_RQST BIT(1)
-#define EN_TEAR_FX BIT(0)
+#define ACK_RQST_EN BIT(1)
+#define TEAR_FX_EN BIT(0)
#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
DCS_LW_TX_LP | \
@@ -125,21 +120,20 @@
GEN_SW_0P_TX_LP)
#define DSI_GEN_HDR 0x6c
+/* TODO These 2 defines will be reworked thanks to mipi_dsi_create_packet() */
#define GEN_HDATA(data) (((data) & 0xffff) << 8)
-#define GEN_HDATA_MASK (0xffff << 8)
#define GEN_HTYPE(type) (((type) & 0xff) << 0)
-#define GEN_HTYPE_MASK 0xff
#define DSI_GEN_PLD_DATA 0x70
#define DSI_CMD_PKT_STATUS 0x74
-#define GEN_CMD_EMPTY BIT(0)
-#define GEN_CMD_FULL BIT(1)
-#define GEN_PLD_W_EMPTY BIT(2)
-#define GEN_PLD_W_FULL BIT(3)
-#define GEN_PLD_R_EMPTY BIT(4)
-#define GEN_PLD_R_FULL BIT(5)
#define GEN_RD_CMD_BUSY BIT(6)
+#define GEN_PLD_R_FULL BIT(5)
+#define GEN_PLD_R_EMPTY BIT(4)
+#define GEN_PLD_W_FULL BIT(3)
+#define GEN_PLD_W_EMPTY BIT(2)
+#define GEN_CMD_FULL BIT(1)
+#define GEN_CMD_EMPTY BIT(0)
#define DSI_TO_CNT_CFG 0x78
#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16)
@@ -154,6 +148,7 @@
#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16)
#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff)
+/* TODO Next register is slightly different between 1.30 & 1.31 IP version */
#define DSI_PHY_TMR_CFG 0x9c
#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24)
#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16)
@@ -170,12 +165,12 @@
#define PHY_UNSHUTDOWNZ BIT(0)
#define DSI_PHY_IF_CFG 0xa4
-#define N_LANES(n) ((((n) - 1) & 0x3) << 0)
#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
+#define N_LANES(n) (((n) - 1) & 0x3)
#define DSI_PHY_STATUS 0xb0
-#define LOCK BIT(0)
-#define STOP_STATE_CLK_LANE BIT(2)
+#define PHY_STOP_STATE_CLK_LANE BIT(2)
+#define PHY_LOCK BIT(0)
#define DSI_PHY_TST_CTRL0 0xb4
#define PHY_TESTCLK BIT(1)
@@ -183,12 +178,6 @@
#define PHY_TESTCLR BIT(0)
#define PHY_UNTESTCLR 0
-#define DSI_PHY_TST_CTRL1 0xb8
-#define PHY_TESTEN BIT(16)
-#define PHY_UNTESTEN 0
-#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
-#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
-
#define DSI_INT_ST0 0xbc
#define DSI_INT_ST1 0xc0
#define DSI_INT_MSK0 0xc4
@@ -307,7 +296,7 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
u32 val = 0;
if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
- val |= EN_ACK_RQST;
+ val |= ACK_RQST_EN;
if (lpm)
val |= CMD_MODE_ALL_LP;
@@ -506,8 +495,8 @@ static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
* timeout clock division should be computed with the
* high speed transmission counter timeout and byte lane...
*/
- dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
- TX_ESC_CLK_DIVIDSION(esc_clk_division));
+ dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVISION(10) |
+ TX_ESC_CLK_DIVISION(esc_clk_division));
}
static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
@@ -520,7 +509,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
color = DPI_COLOR_CODING_24BIT;
break;
case MIPI_DSI_FMT_RGB666:
- color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+ color = DPI_COLOR_CODING_18BIT_2 | LOOSELY18_EN;
break;
case MIPI_DSI_FMT_RGB666_PACKED:
color = DPI_COLOR_CODING_18BIT_1;
@@ -535,7 +524,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
val |= HSYNC_ACTIVE_LOW;
- dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+ dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
dsi_write(dsi, DSI_DPI_CFG_POL, val);
/*
@@ -550,7 +539,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
{
- dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+ dsi_write(dsi, DSI_PCKHDL_CFG, CRC_RX_EN | ECC_RX_EN | BTA_EN);
}
static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
@@ -571,7 +560,7 @@ static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
/*
* TODO dw drv improvements
* compute high speed transmission counter timeout according
- * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
+ * to the timeout clock division (TO_CLK_DIVISION) and byte lane...
*/
dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
/*
@@ -684,13 +673,13 @@ static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
- ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
- val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
+ ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
+ val & PHY_LOCK, 1000, PHY_STATUS_TIMEOUT_US);
if (ret < 0)
DRM_DEBUG_DRIVER("failed to wait phy lock state\n");
ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
- val, val & STOP_STATE_CLK_LANE, 1000,
+ val, val & PHY_STOP_STATE_CLK_LANE, 1000,
PHY_STATUS_TIMEOUT_US);
if (ret < 0)
DRM_DEBUG_DRIVER("failed to wait phy clk lane stop state\n");
--
1.9.1
Powered by blists - more mailing lists