lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1500476858.2364.45.camel@pengutronix.de>
Date:   Wed, 19 Jul 2017 17:07:38 +0200
From:   Philipp Zabel <p.zabel@...gutronix.de>
To:     Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Cc:     linux-snps-arc@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH] ARC: reset: introduce HSDKv1 reset driver

On Tue, 2017-07-18 at 20:25 +0300, Eugeniy Paltsev wrote:
> The HSDK v1 periphery IPs can be reset by accessing some registers
> from the CGU block.
> 
> The list of available reset lines is documented in the DT bindings.
> 
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
> ---
>  .../bindings/reset/snps,hsdk-v1-reset.txt          |  28 ++++
>  MAINTAINERS                                        |   7 +
>  drivers/reset/Kconfig                              |   6 +
>  drivers/reset/Makefile                             |   1 +
>  drivers/reset/reset-hsdk-v1.c                      | 141 +++++++++++++++++++++
>  include/dt-bindings/reset/snps,hsdk-v1-reset.h     |  17 +++
>  6 files changed, 200 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
>  create mode 100644 drivers/reset/reset-hsdk-v1.c
>  create mode 100644 include/dt-bindings/reset/snps,hsdk-v1-reset.h
> 
> diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
> new file mode 100644
> index 0000000..4fdea89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
> @@ -0,0 +1,28 @@
> +Binding for the HSDK v1 reset controller
> +
> +This binding uses the common reset binding[1].
> +
> +[1] Documentation/devicetree/bindings/reset/reset.txt
> +
> +Required properties:
> +- compatible: should be "snps,hsdk-v1.0-reset".
> +- reg: should always contain 2 pairs address - length: first for reset
> +  configuration registers and second for corresponding SW reset and status bits
> +  register.
> +- #reset-cells: from common reset binding; Should always be set to 1.
> +
> +Example:
> +	reset: reset@880 {
> +		compatible = "snps,hsdk-v1.0-reset";
> +		#reset-cells = <1>;
> +		reg = <0x880 0x80>, <0xFF0 0x4>;
> +	};
> +
> +Specifying reset lines connected to IP modules:
> +	ethernet@.... {
> +		....
> +		resets = <&reset HSDK_V1_ETH_RESET>;
> +		....
> +	};
> +
> +The index could be found in <dt-bindings/reset/snps,hsdk-v1-reset.h>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 09b5ab6..99deabb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11307,6 +11307,13 @@ L:	linux-mmc@...r.kernel.org
>  S:	Maintained
>  F:	drivers/mmc/host/dw_mmc*
>  
> +SYNOPSYS HSDK RESET CONTROLLER DRIVER
> +M:	Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
> +S:	Supported
> +F:	drivers/reset/reset-hsdk-v1.c
> +F:	include/dt-bindings/reset/snps,hsdk-v1-reset.h
> +F:	Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
> +
>  SYSTEM TRACE MODULE CLASS
>  M:	Alexander Shishkin <alexander.shishkin@...ux.intel.com>
>  S:	Maintained
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index d21c07c..cb13f0d 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -34,6 +34,12 @@ config RESET_BERLIN
>  	help
>  	  This enables the reset controller driver for Marvell Berlin SoCs.
>  
> +config RESET_HSDK_V1
> +	bool "HSDK v1 Reset Driver"
> +	default n

I suppose there will be a SOC_HSDK_V1 or similar in the future so that
we can hide this option and enable it by default like the other reset
drivers?

> +	help
> +	  This enables the reset controller driver for HSDK v1.
> +
>  config RESET_IMX7
>  	bool "i.MX7 Reset Driver" if COMPILE_TEST
>  	default SOC_IMX7D
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 02a74db..772e5f2 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
>  obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
>  obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
>  obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
> +obj-$(CONFIG_RESET_HSDK_V1) += reset-hsdk-v1.o
>  obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
>  obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
>  obj-$(CONFIG_RESET_MESON) += reset-meson.o
> diff --git a/drivers/reset/reset-hsdk-v1.c b/drivers/reset/reset-hsdk-v1.c
> new file mode 100644
> index 0000000..64d2a6e
> --- /dev/null
> +++ b/drivers/reset/reset-hsdk-v1.c
> @@ -0,0 +1,141 @@
> +/*
> + * Copyright (C) 2017 Synopsys.
> + *
> + * Synopsys HSDKv1 SDP reset driver.
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +
> +#define to_hsdkv1_rst(p)	container_of((p), struct hsdkv1_rst, rcdev)
> +
> +struct hsdkv1_rst {
> +	void __iomem			*regs_ctl;
> +	void __iomem			*regs_rst;
> +	spinlock_t			lock;
> +	struct reset_controller_dev	rcdev;
> +};
> +
> +static const u32 rst_map[] = {
> +	BIT(16), /* APB_RST  */
> +	BIT(17), /* AXI_RST  */
> +	BIT(18), /* ETH_RST  */
> +	BIT(19), /* USB_RST  */
> +	BIT(20), /* SDIO_RST */
> +	BIT(21), /* HDMI_RST */
> +	BIT(22), /* GFX_RST  */
> +	BIT(25), /* DMAC_RST */
> +	BIT(31), /* EBI_RST  */
> +};
> +
> +#define HSDK_MAX_RESETS			ARRAY_SIZE(rst_map)
> +
> +#define CGU_ARC_RST_CTRL		0x0
> +#define CGU_SYS_RST_CTRL		0x20
> +#define CGU_DDR_RST_CTRL		0x40
> +#define CGU_TUN_RST_CTRL		0x60

The ARC, DDR, and TUN reset control registers are never used.

> +
> +#define CGU_IP_SW_RESET			0x0
> +#define CGU_IP_SW_RESET_DELAY_SHIFT	16
> +#define CGU_IP_SW_RESET_DELAY_MASK	GENMASK(31, CGU_IP_SW_RESET_DELAY_SHIFT)
> +#define CGU_IP_SW_RESET_DELAY		0
> +#define CGU_IP_SW_RESET_RESET		BIT(0)
> +#define SW_RESET_TIMEOUT		10000
> +
> +static void hsdkv1_reset_config(struct hsdkv1_rst *rst, unsigned long id)
> +{
> +	writel(rst_map[id], rst->regs_ctl + CGU_SYS_RST_CTRL);
> +}
> +
> +static int hsdkv1_reset_do(struct hsdkv1_rst *rst)
> +{
> +	u32 reg;
> +
> +	reg = readl(rst->regs_rst + CGU_IP_SW_RESET);
> +	reg &= ~CGU_IP_SW_RESET_DELAY_MASK;
> +	reg |= CGU_IP_SW_RESET_DELAY << CGU_IP_SW_RESET_DELAY_SHIFT;
> +	reg |= CGU_IP_SW_RESET_RESET;
> +	writel(reg, rst->regs_rst + CGU_IP_SW_RESET);
> +
> +	/* wait till reset bit is back to 0 */
> +	return readl_poll_timeout_atomic(rst->regs_rst + CGU_IP_SW_RESET, reg,
> +		!(reg & CGU_IP_SW_RESET_RESET), 5, SW_RESET_TIMEOUT);
> +}
> +
> +static int hsdkv1_reset_reset(struct reset_controller_dev *rcdev,
> +			      unsigned long id)
> +{
> +	struct hsdkv1_rst *rst = to_hsdkv1_rst(rcdev);
> +	unsigned long flags;
> +	int ret;
> +
> +	spin_lock_irqsave(&rst->lock, flags);
> +	hsdkv1_reset_config(rst, id);
> +	ret = hsdkv1_reset_do(rst);
> +	spin_unlock_irqrestore(&rst->lock, flags);
> +
> +	return ret;
> +}
> +
> +static const struct reset_control_ops hsdkv1_reset_ops = {
> +	.reset	= hsdkv1_reset_reset,
> +};
> +
> +static int hsdkv1_reset_probe(struct platform_device *pdev)
> +{
> +	struct hsdkv1_rst *rst;
> +	struct resource *mem;
> +
> +	rst = devm_kzalloc(&pdev->dev, sizeof(*rst), GFP_KERNEL);
> +	if (!rst)
> +		return -ENOMEM;
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	rst->regs_ctl = devm_ioremap_resource(&pdev->dev, mem);
> +	if (IS_ERR(rst->regs_ctl))
> +		return PTR_ERR(rst->regs_ctl);
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	rst->regs_rst = devm_ioremap_resource(&pdev->dev, mem);
> +	if (IS_ERR(rst->regs_rst))
> +		return PTR_ERR(rst->regs_rst);
> +
> +	spin_lock_init(&rst->lock);
> +
> +	rst->rcdev.owner = THIS_MODULE;
> +	rst->rcdev.ops = &hsdkv1_reset_ops;
> +	rst->rcdev.of_node = pdev->dev.of_node;
> +	rst->rcdev.nr_resets = HSDK_MAX_RESETS;
> +	rst->rcdev.of_reset_n_cells = 1;
> +
> +	return reset_controller_register(&rst->rcdev);
> +}
> +
> +static const struct of_device_id hsdkv1_reset_dt_match[] = {
> +	{ .compatible = "snps,hsdk-v1.0-reset" },
> +	{ },
> +};
> +
> +static struct platform_driver hsdkv1_reset_driver = {
> +	.probe	= hsdkv1_reset_probe,
> +	.driver	= {
> +		.name = "hsdk-v1.0-reset",
> +		.of_match_table = hsdkv1_reset_dt_match,
> +	},
> +};
> +builtin_platform_driver(hsdkv1_reset_driver);
> +
> +MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>");
> +MODULE_DESCRIPTION("Synopsys HSDKv1 SDP reset driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/dt-bindings/reset/snps,hsdk-v1-reset.h b/include/dt-bindings/reset/snps,hsdk-v1-reset.h
> new file mode 100644
> index 0000000..d898c89
> --- /dev/null
> +++ b/include/dt-bindings/reset/snps,hsdk-v1-reset.h
> @@ -0,0 +1,17 @@
> +/**
> + * This header provides index for the HSDK v1 reset controller.
> + */
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_HSDK_V1
> +#define _DT_BINDINGS_RESET_CONTROLLER_HSDK_V1
> +
> +#define HSDK_V1_APB_RESET	0
> +#define HSDK_V1_AXI_RESET	1
> +#define HSDK_V1_ETH_RESET	2
> +#define HSDK_V1_USB_RESET	3
> +#define HSDK_V1_SDIO_RESET	4
> +#define HSDK_V1_HDMI_RESET	5
> +#define HSDK_V1_GFX_RESET	6
> +#define HSDK_V1_DMAC_RESET	7
> +#define HSDK_V1_EBI_RESET	8
> +
> +#endif /*_DT_BINDINGS_RESET_CONTROLLER_HSDK_V1*/

regards
Philipp

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ