linux-kernel - [PATCH v2 1/8] dt-bindings: phy: qmp: Add output-clock-names

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1500453819-5223-2-git-send-email-varada@codeaurora.org>
Date:   Wed, 19 Jul 2017 14:13:32 +0530
From:   Varadarajan Narayanan <varada@...eaurora.org>
To:     bhelgaas@...gle.com, robh+dt@...nel.org, mark.rutland@....com,
        svarbanov@...sol.com, kishon@...com, sboyd@...eaurora.org,
        vivek.gautam@...eaurora.org, fengguang.wu@...el.com,
        weiyongjun1@...wei.com, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org
Cc:     Varadarajan Narayanan <varada@...eaurora.org>
Subject: [PATCH v2 1/8] dt-bindings: phy: qmp: Add output-clock-names

The phy outputs a clock that will act as the parent for
the phy's pipe clock. Add the name of this clock to the
lane's DT node.

Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Varadarajan Narayanan <varada@...eaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index e11c563..5d7a51f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -60,6 +60,8 @@ Required properties for child node:
 	   one for each entry in clock-names.
  - clock-names: Must contain following for pcie and usb qmp phys:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
+ - clock-output-names: Name of the phy clock that will be the parent for
+		       the above pipe clock.
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -96,6 +98,7 @@ Example:
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "pipe0";
+			clock-output-names = "pcie_0_pipe_clk_src";
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "lane0";
 		};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation