[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1500552357-29487-3-git-send-email-philippe.cornu@st.com>
Date: Thu, 20 Jul 2017 14:05:52 +0200
From: Philippe CORNU <philippe.cornu@...com>
To: Yannick Fertre <yannick.fertre@...com>,
Philippe Cornu <philippe.cornu@...com>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Vincent Abriou <vincent.abriou@...com>,
David Airlie <airlied@...ux.ie>,
<dri-devel@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>
CC: Fabien Dessenne <fabien.dessenne@...com>,
Mickael Reulier <mickael.reulier@...com>,
Gabriel Fernandez <gabriel.fernandez@...com>,
Ludovic Barre <ludovic.barre@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Subject: [PATCH v2 2/7] drm/stm: ltdc: Cleanup signal polarity defines
The GCR_PCPOL/DEPOL/VSPOL/HSPOL defines are sufficient to
describe the HS, VS, DE & PC signal polarities.
Signed-off-by: Philippe CORNU <philippe.cornu@...com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@...aro.org>
---
drivers/gpu/drm/stm/ltdc.c | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index e46b427..50e8a89 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -104,10 +104,10 @@
#define GCR_LTDCEN BIT(0) /* LTDC ENable */
#define GCR_DEN BIT(16) /* Dither ENable */
-#define GCR_PCPOL BIT(28) /* Pixel Clock POLarity */
-#define GCR_DEPOL BIT(29) /* Data Enable POLarity */
-#define GCR_VSPOL BIT(30) /* Vertical Synchro POLarity */
-#define GCR_HSPOL BIT(31) /* Horizontal Synchro POLarity */
+#define GCR_PCPOL BIT(28) /* Pixel Clock POLarity-Inverted */
+#define GCR_DEPOL BIT(29) /* Data Enable POLarity-High */
+#define GCR_VSPOL BIT(30) /* Vertical Synchro POLarity-High */
+#define GCR_HSPOL BIT(31) /* Horizontal Synchro POLarity-High */
#define GC1R_WBCH GENMASK(3, 0) /* Width of Blue CHannel output */
#define GC1R_WGCH GENMASK(7, 4) /* Width of Green Channel output */
@@ -174,14 +174,6 @@
#define LXCFBLNR_CFBLN GENMASK(10, 0) /* Color Frame Buffer Line Number */
-#define HSPOL_AL 0 /* Horizontal Sync POLarity Active Low */
-#define VSPOL_AL 0 /* Vertical Sync POLarity Active Low */
-#define DEPOL_AL 0 /* Data Enable POLarity Active Low */
-#define PCPOL_IPC 0 /* Input Pixel Clock */
-#define HSPOL_AH GCR_HSPOL /* Horizontal Sync POLarity Active High */
-#define VSPOL_AH GCR_VSPOL /* Vertical Sync POLarity Active High */
-#define DEPOL_AH GCR_DEPOL /* Data Enable POLarity Active High */
-#define PCPOL_IIPC GCR_PCPOL /* Inverted Input Pixel Clock */
#define CONSTA_MAX 0xFF /* CONSTant Alpha MAX= 1.0 */
#define BF1_PAXCA 0x600 /* Pixel Alpha x Constant Alpha */
#define BF1_CA 0x400 /* Constant Alpha */
@@ -459,20 +451,20 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
clk_enable(ldev->pixel_clk);
- /* Configures the HS, VS, DE and PC polarities. */
- val = HSPOL_AL | VSPOL_AL | DEPOL_AL | PCPOL_IPC;
+ /* Configures the HS, VS, DE and PC polarities. Default Active Low */
+ val = 0;
if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
- val |= HSPOL_AH;
+ val |= GCR_HSPOL;
if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
- val |= VSPOL_AH;
+ val |= GCR_VSPOL;
if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
- val |= DEPOL_AH;
+ val |= GCR_DEPOL;
if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
- val |= PCPOL_IIPC;
+ val |= GCR_PCPOL;
reg_update_bits(ldev->regs, LTDC_GCR,
GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
--
1.9.1
Powered by blists - more mailing lists