| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1500616059-32352-1-git-send-email-raveendra.padasalagi@broadcom.com>
Date: Fri, 21 Jul 2017 11:17:39 +0530
From: Raveendra Padasalagi <raveendra.padasalagi@...adcom.com>
To: Herbert Xu <herbert@...dor.apana.org.au>,
"David S. Miller" <davem@...emloft.net>,
Rob Rice <rob.rice@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
linux-crypto@...r.kernel.org
Cc: Ray Jui <ray.jui@...adcom.com>,
Steve Lin <steven.lin1@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com,
linux-kernel@...r.kernel.org,
Raveendra Padasalagi <raveendra.padasalagi@...adcom.com>,
stable@...r.kernel.org
Subject: [PATCH v1] crypto: brcm - Support more FlexRM rings than SPU engines.
Enhance code to generically support cases where DMA rings
are greater than or equal to number of SPU engines.
New hardware has underlying DMA engine-FlexRM with 32 rings
which can be used to communicate to any of the available
10 SPU engines.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Cc: stable@...r.kernel.org
---
Changes in v1:
- Added error path to clean up mbox channel in spu_mb_init() in case
mbox channel request fails.
- Removed spu_reg_vbase[] and used spu->reg_vbase[] array to store
mapped registers.
- spu_dt_read() modified to improve readability
drivers/crypto/bcm/cipher.c | 109 ++++++++++++++++++++------------------------
drivers/crypto/bcm/cipher.h | 13 +++---
2 files changed, 56 insertions(+), 66 deletions(-)
diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c
index cc0d5b9..875b507 100644
--- a/drivers/crypto/bcm/cipher.c
+++ b/drivers/crypto/bcm/cipher.c
@@ -89,8 +89,6 @@
module_param(aead_pri, int, 0644);
MODULE_PARM_DESC(aead_pri, "Priority for AEAD algos");
-#define MAX_SPUS 16
-
/* A type 3 BCM header, expected to precede the SPU header for SPU-M.
* Bits 3 and 4 in the first byte encode the channel number (the dma ringset).
* 0x60 - ring 0
@@ -119,7 +117,7 @@ static u8 select_channel(void)
{
u8 chan_idx = atomic_inc_return(&iproc_priv.next_chan);
- return chan_idx % iproc_priv.spu.num_spu;
+ return chan_idx % iproc_priv.spu.num_chan;
}
/**
@@ -4527,8 +4525,13 @@ static void spu_functions_register(struct device *dev,
*/
static int spu_mb_init(struct device *dev)
{
- struct mbox_client *mcl = &iproc_priv.mcl[iproc_priv.spu.num_spu];
- int err;
+ struct mbox_client *mcl = &iproc_priv.mcl;
+ int err, i;
+
+ iproc_priv.mbox = devm_kcalloc(dev, iproc_priv.spu.num_chan,
+ sizeof(struct mbox_chan *), GFP_KERNEL);
+ if (!iproc_priv.mbox)
+ return -ENOMEM;
mcl->dev = dev;
mcl->tx_block = false;
@@ -4537,25 +4540,33 @@ static int spu_mb_init(struct device *dev)
mcl->rx_callback = spu_rx_callback;
mcl->tx_done = NULL;
- iproc_priv.mbox[iproc_priv.spu.num_spu] =
- mbox_request_channel(mcl, 0);
- if (IS_ERR(iproc_priv.mbox[iproc_priv.spu.num_spu])) {
- err = (int)PTR_ERR(iproc_priv.mbox[iproc_priv.spu.num_spu]);
- dev_err(dev,
- "Mbox channel %d request failed with err %d",
- iproc_priv.spu.num_spu, err);
- iproc_priv.mbox[iproc_priv.spu.num_spu] = NULL;
- return err;
+ for (i = 0; i < iproc_priv.spu.num_chan; i++) {
+ iproc_priv.mbox[i] = mbox_request_channel(mcl, i);
+ if (IS_ERR(iproc_priv.mbox[i])) {
+ err = (int)PTR_ERR(iproc_priv.mbox[i]);
+ dev_err(dev,
+ "Mbox channel %d request failed with err %d",
+ i, err);
+ iproc_priv.mbox[i] = NULL;
+ goto free_channels;
+ }
}
return 0;
+free_channels:
+ for (i = 0; i < iproc_priv.spu.num_chan; i++) {
+ if (iproc_priv.mbox[i])
+ mbox_free_channel(iproc_priv.mbox[i]);
+ }
+
+ return err;
}
static void spu_mb_release(struct platform_device *pdev)
{
int i;
- for (i = 0; i < iproc_priv.spu.num_spu; i++)
+ for (i = 0; i < iproc_priv.spu.num_chan; i++)
mbox_free_channel(iproc_priv.mbox[i]);
}
@@ -4566,7 +4577,7 @@ static void spu_counters_init(void)
atomic_set(&iproc_priv.session_count, 0);
atomic_set(&iproc_priv.stream_count, 0);
- atomic_set(&iproc_priv.next_chan, (int)iproc_priv.spu.num_spu);
+ atomic_set(&iproc_priv.next_chan, (int)iproc_priv.spu.num_chan);
atomic64_set(&iproc_priv.bytes_in, 0);
atomic64_set(&iproc_priv.bytes_out, 0);
for (i = 0; i < SPU_OP_NUM; i++) {
@@ -4808,47 +4819,33 @@ static int spu_dt_read(struct platform_device *pdev)
struct resource *spu_ctrl_regs;
const struct of_device_id *match;
const struct spu_type_subtype *matched_spu_type;
- void __iomem *spu_reg_vbase[MAX_SPUS];
- int err;
+ struct device_node *dn = pdev->dev.of_node;
+ int err, i;
+
+ /* Count number of mailbox channels */
+ spu->num_chan = of_count_phandle_with_args(dn, "mboxes", "#mbox-cells");
match = of_match_device(of_match_ptr(bcm_spu_dt_ids), dev);
matched_spu_type = match->data;
- if (iproc_priv.spu.num_spu > 1) {
- /* If this is 2nd or later SPU, make sure it's same type */
- if ((spu->spu_type != matched_spu_type->type) ||
- (spu->spu_subtype != matched_spu_type->subtype)) {
- err = -EINVAL;
- dev_err(&pdev->dev, "Multiple SPU types not allowed");
- return err;
- }
- } else {
- /* Record type of first SPU */
- spu->spu_type = matched_spu_type->type;
- spu->spu_subtype = matched_spu_type->subtype;
- }
+ spu->spu_type = matched_spu_type->type;
+ spu->spu_subtype = matched_spu_type->subtype;
- /* Get and map SPU registers */
- spu_ctrl_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!spu_ctrl_regs) {
- err = -EINVAL;
- dev_err(&pdev->dev, "Invalid/missing registers for SPU\n");
- return err;
- }
+ i = 0;
+ for (i = 0; (i < MAX_SPUS) && ((spu_ctrl_regs =
+ platform_get_resource(pdev, IORESOURCE_MEM, i)) != NULL); i++) {
- spu_reg_vbase[iproc_priv.spu.num_spu] =
- devm_ioremap_resource(dev, spu_ctrl_regs);
- if (IS_ERR(spu_reg_vbase[iproc_priv.spu.num_spu])) {
- err = PTR_ERR(spu_reg_vbase[iproc_priv.spu.num_spu]);
- dev_err(&pdev->dev, "Failed to map registers: %d\n",
- err);
- spu_reg_vbase[iproc_priv.spu.num_spu] = NULL;
- return err;
+ spu->reg_vbase[i] = devm_ioremap_resource(dev, spu_ctrl_regs);
+ if (IS_ERR(spu->reg_vbase[i])) {
+ err = PTR_ERR(spu->reg_vbase[i]);
+ dev_err(&pdev->dev, "Failed to map registers: %d\n",
+ err);
+ spu->reg_vbase[i] = NULL;
+ return err;
+ }
}
-
- dev_dbg(dev, "SPU %d detected.", iproc_priv.spu.num_spu);
-
- spu->reg_vbase[iproc_priv.spu.num_spu] = spu_reg_vbase;
+ spu->num_spu = i;
+ dev_dbg(dev, "Device has %d SPUs", spu->num_spu);
return 0;
}
@@ -4859,8 +4856,8 @@ int bcm_spu_probe(struct platform_device *pdev)
struct spu_hw *spu = &iproc_priv.spu;
int err = 0;
- iproc_priv.pdev[iproc_priv.spu.num_spu] = pdev;
- platform_set_drvdata(iproc_priv.pdev[iproc_priv.spu.num_spu],
+ iproc_priv.pdev = pdev;
+ platform_set_drvdata(iproc_priv.pdev,
&iproc_priv);
err = spu_dt_read(pdev);
@@ -4871,12 +4868,6 @@ int bcm_spu_probe(struct platform_device *pdev)
if (err < 0)
goto failure;
- iproc_priv.spu.num_spu++;
-
- /* If already initialized, we've just added another SPU and are done */
- if (iproc_priv.inited)
- return 0;
-
if (spu->spu_type == SPU_TYPE_SPUM)
iproc_priv.bcm_hdr_len = 8;
else if (spu->spu_type == SPU_TYPE_SPU2)
@@ -4892,8 +4883,6 @@ int bcm_spu_probe(struct platform_device *pdev)
if (err < 0)
goto fail_reg;
- iproc_priv.inited = true;
-
return 0;
fail_reg:
diff --git a/drivers/crypto/bcm/cipher.h b/drivers/crypto/bcm/cipher.h
index 51dca52..57a55eb 100644
--- a/drivers/crypto/bcm/cipher.h
+++ b/drivers/crypto/bcm/cipher.h
@@ -427,10 +427,13 @@ struct spu_hw {
/* The number of SPUs on this platform */
u32 num_spu;
+
+ /* The number of SPU channels on this platform */
+ u32 num_chan;
};
struct device_private {
- struct platform_device *pdev[MAX_SPUS];
+ struct platform_device *pdev;
struct spu_hw spu;
@@ -470,12 +473,10 @@ struct device_private {
/* Number of ICV check failures for AEAD messages */
atomic_t bad_icv;
- struct mbox_client mcl[MAX_SPUS];
- /* Array of mailbox channel pointers, one for each channel */
- struct mbox_chan *mbox[MAX_SPUS];
+ struct mbox_client mcl;
- /* Driver initialized */
- bool inited;
+ /* Array of mailbox channel pointers, one for each channel */
+ struct mbox_chan **mbox;
};
extern struct device_private iproc_priv;
--
1.9.1
Powered by blists - more mailing lists