| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1500634173-24416-5-git-send-email-akdwived@codeaurora.org>
Date: Fri, 21 Jul 2017 16:19:33 +0530
From: Avaneesh Kumar Dwivedi <akdwived@...eaurora.org>
To: bjorn.andersson@...aro.org
Cc: sboyd@...eaurora.org, agross@...eaurora.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-remoteproc@...r.kernel.org,
Avaneesh Kumar Dwivedi <akdwived@...eaurora.org>
Subject: [PATCH v7 4/4] remoteproc: qcom: Add support for mss remoteproc on msm8996
This patch add support for mss boot on msm8996. Major changes
include initializing mss rproc for msm8996, making appropriate
change for executing mss reset sequence etc.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@...eaurora.org>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 1 +
drivers/remoteproc/qcom_q6v5_pil.c | 164 ++++++++++++++++++---
2 files changed, 141 insertions(+), 24 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 92347fe..87a8e51 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -11,6 +11,7 @@ on the Qualcomm Hexagon core.
"qcom,msm8916-mss-pil",
"qcom,msm8974-mss-pil"
+ "qcom,msm8996-mss-pil"
- reg:
Usage: required
Value type: <prop-encoded-array>
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index a82b62a..808ee45 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -32,6 +32,7 @@
#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
+#include <linux/iopoll.h>
#include "remoteproc_internal.h"
#include "qcom_common.h"
@@ -64,6 +65,8 @@
#define QDSP6SS_RESET_REG 0x014
#define QDSP6SS_GFMUX_CTL_REG 0x020
#define QDSP6SS_PWR_CTL_REG 0x030
+#define QDSP6SS_MEM_PWR_CTL 0x0B0
+#define QDSP6SS_STRAP_ACC 0x110
/* AXI Halt Register Offsets */
#define AXI_HALTREQ_REG 0x0
@@ -92,6 +95,15 @@
#define QDSS_BHS_ON BIT(21)
#define QDSS_LDO_BYP BIT(22)
+/* QDSP6v56 parameters */
+#define QDSP6v56_LDO_BYP BIT(25)
+#define QDSP6v56_BHS_ON BIT(24)
+#define QDSP6v56_CLAMP_WL BIT(21)
+#define QDSP6v56_CLAMP_QMC_MEM BIT(22)
+#define HALT_CHECK_MAX_LOOPS 200
+#define QDSP6SS_XO_CBCR 0x0038
+#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
+
struct reg_info {
struct regulator *reg;
int uV;
@@ -110,6 +122,7 @@ struct rproc_hexagon_res {
struct qcom_mss_reg_res *active_supply;
char **proxy_clk_names;
char **active_clk_names;
+ int version;
bool need_mem_protection;
};
@@ -157,6 +170,13 @@ struct q6v5 {
struct qcom_rproc_subdev smd_subdev;
int mpss_perm;
int mba_perm;
+ int version;
+};
+
+enum {
+ MSS_MSM8916,
+ MSS_MSM8974,
+ MSS_MSM8996,
};
static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
@@ -386,33 +406,98 @@ static int q6v5proc_reset(struct q6v5 *qproc)
{
u32 val;
int ret;
+ int i;
- /* Assert resets, stop core */
- val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
- val |= (Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE);
- writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
- /* Enable power block headswitch, and wait for it to stabilize */
- val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= QDSS_BHS_ON | QDSS_LDO_BYP;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- udelay(1);
-
- /*
- * Turn on memories. L2 banks should be done individually
- * to minimize inrush current.
- */
- val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
- Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_L2DATA_SLP_NRET_N_2;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_L2DATA_SLP_NRET_N_1;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_L2DATA_SLP_NRET_N_0;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ if (qproc->version == MSS_MSM8996) {
+ /* Override the ACC value if required */
+ writel(QDSP6SS_ACC_OVERRIDE_VAL,
+ qproc->reg_base + QDSP6SS_STRAP_ACC);
+
+ /* Assert resets, stop core */
+ val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
+ val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
+ writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
+
+ /* BHS require xo cbcr to be enabled */
+ val = readl(qproc->reg_base + QDSP6SS_XO_CBCR);
+ val |= 0x1;
+ writel(val, qproc->reg_base + QDSP6SS_XO_CBCR);
+ /* Read CLKOFF bit to go low indicating CLK is enabled */
+ ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR,
+ val, !(val & BIT(31)), 1,
+ HALT_CHECK_MAX_LOOPS);
+ if (ret) {
+ dev_err(qproc->dev,
+ "xo cbcr enabling timed out (rc:%d)\n", ret);
+ return ret;
+ }
+ /* Enable power block headswitch and wait for it to stabilize */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= QDSP6v56_BHS_ON;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ udelay(1);
+
+ /* Put LDO in bypass mode */
+ val |= QDSP6v56_LDO_BYP;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+ /* Deassert QDSP6 compiler memory clamp */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val &= ~QDSP6v56_CLAMP_QMC_MEM;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+ /* Deassert memory peripheral sleep and L2 memory standby */
+ val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+ /* Turn on L1, L2, ETB and JU memories 1 at a time */
+ val = readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
+ for (i = 19; i >= 0; i--) {
+ val |= BIT(i);
+ writel(val, qproc->reg_base +
+ QDSP6SS_MEM_PWR_CTL);
+ /*
+ * Read back value to ensure the write is done then
+ * wait for 1us for both memory peripheral and data
+ * array to turn on.
+ */
+ val |= readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
+ udelay(1);
+ }
+ /* Remove word line clamp */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val &= ~QDSP6v56_CLAMP_WL;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ } else {
+ /* Assert resets, stop core */
+ val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
+ val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
+ writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
+
+ /* Enable power block headswitch and wait for it to stabilize */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= QDSS_BHS_ON | QDSS_LDO_BYP;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ udelay(1);
+ /*
+ * Turn on memories. L2 banks should be done individually
+ * to minimize inrush current.
+ */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
+ Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_L2DATA_SLP_NRET_N_2;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_L2DATA_SLP_NRET_N_1;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_L2DATA_SLP_NRET_N_0;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ }
/* Remove IO clamp */
val &= ~Q6SS_CLAMP_IO;
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
@@ -792,6 +877,15 @@ static int q6v5_stop(struct rproc *rproc)
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
+ if (qproc->version == MSS_MSM8996) {
+ /*
+ * To avoid high MX current during LPASS/MSS restart.
+ */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL |
+ QDSP6v56_CLAMP_QMC_MEM;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ }
ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, 0,
qproc->mpss_phys, qproc->mpss_size);
WARN_ON(ret);
@@ -1092,6 +1186,7 @@ static int q6v5_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
+ qproc->version = desc->version;
qproc->need_mem_protection = desc->need_mem_protection;
ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
if (ret < 0)
@@ -1142,6 +1237,24 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
+static const struct rproc_hexagon_res msm8996_mss = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_clk_names = (char*[]){
+ "xo",
+ "pnoc",
+ NULL
+ },
+ .active_clk_names = (char*[]){
+ "iface",
+ "bus",
+ "mem",
+ "gpll0_mss_clk",
+ NULL
+ },
+ .need_mem_protection = true,
+ .version = MSS_MSM8996,
+};
+
static const struct rproc_hexagon_res msm8916_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -1170,6 +1283,7 @@ static int q6v5_remove(struct platform_device *pdev)
NULL
},
.need_mem_protection = false,
+ .version = MSS_MSM8916,
};
static const struct rproc_hexagon_res msm8974_mss = {
@@ -1208,12 +1322,14 @@ static int q6v5_remove(struct platform_device *pdev)
NULL
},
.need_mem_protection = false,
+ .version = MSS_MSM8974,
};
static const struct of_device_id q6v5_of_match[] = {
{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
+ { .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
{ },
};
MODULE_DEVICE_TABLE(of, q6v5_of_match);
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists