Message-Id: <1500635890-12714-1-git-send-email-chenjh@rock-chips.com>
Date:   Fri, 21 Jul 2017 19:18:10 +0800
From:   Joseph Chen <chenjh@...k-chips.com>
To:     gnurou@...il.com, linus.walleij@...aro.org,
        dmitry.torokhov@...il.com
Cc:     linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
        huangtao@...k-chips.com, tony.xie@...k-chips.com,
        zhangqing@...k-chips.com, wdc@...k-chips.com,
        devicetree@...r.kernel.org, w.egorov@...tec.de,
        lgirdwood@...il.com, broonie@...nel.org, robh+dt@...nel.org,
        mark.rutland@....com, linux-gpio@...r.kernel.org,
        linux-input@...r.kernel.org, Joseph Chen <chenjh@...k-chips.com>
Subject: [PATCH v7 08/12] pinctrl: Add pinctrl driver for the RK805 PMIC

RK805 is one of Rockchip PMICs family, it has 2 output only GPIOs.

This driver is also designed for other Rockchip PMICs to expend.
Different PMIC maybe have different pin features, for example,
RK816 has one pin which can be used for TS or GPIO(input/out).
The mainly difference between PMICs pins are pinmux, direction
and output value, that is 'struct rk805_pin_config'.

Signed-off-by: Joseph Chen <chenjh@...k-chips.com>
---
 drivers/pinctrl/Kconfig         |   8 +
 drivers/pinctrl/Makefile        |   1 +
 drivers/pinctrl/pinctrl-rk805.c | 496 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 505 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-rk805.c

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8f8c2af..ce177d8 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -285,6 +285,14 @@ config PINCTRL_ZYNQ
 	help
 	  This selects the pinctrl driver for Xilinx Zynq.
 
+config PINCTRL_RK805
+	tristate "Pinctrl and GPIO driver for RK805 PMIC"
+	depends on MFD_RK808 && GPIOLIB
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  This selects the pinctrl driver for RK805.
+
 source "drivers/pinctrl/aspeed/Kconfig"
 source "drivers/pinctrl/bcm/Kconfig"
 source "drivers/pinctrl/berlin/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index a251f43..7485af3 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
+obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
 
 obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/
 obj-y				+= bcm/
diff --git a/drivers/pinctrl/pinctrl-rk805.c b/drivers/pinctrl/pinctrl-rk805.c
new file mode 100644
index 0000000..b91ec95
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rk805.c
@@ -0,0 +1,496 @@
+/*
+ * Pinctrl driver for Rockchip RK805 PMIC
+ *
+ * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Joseph Chen <chenjh@...k-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on the pinctrl-as3722 driver
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/rk808.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-utils.h"
+
+struct rk805_pin_function {
+	const char *name;
+	const char *const *groups;
+	unsigned int ngroups;
+	int mux_option;
+};
+
+struct rk805_pin_group {
+	const char *name;
+	const unsigned int pins[1];
+	unsigned int npins;
+};
+
+/*
+ * @reg: gpio setting register;
+ * @fun_mask: functions select mask value, when set is gpio;
+ * @dir_mask: input or output mask value, when set is output, otherwise input;
+ * @val_mask: gpio set value, when set is level high, otherwise low;
+ *
+ * Different PMIC has different pin features, belowing 3 mask members are not
+ * all necessary for every PMIC. For example, RK805 has 2 pins that can be used
+ * as output only GPIOs, so func_mask and dir_mask are not needed. RK816 has 1
+ * pin that can be used as TS/GPIO, so fun_mask, dir_mask and val_mask are all
+ * necessary.
+ */
+struct rk805_pin_config {
+	u8 reg;
+	u8 fun_msk;
+	u8 dir_msk;
+	u8 val_msk;
+};
+
+struct rk805_pctrl_info {
+	struct rk808 *rk808;
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+	struct gpio_chip gpio_chip;
+	struct pinctrl_desc pinctrl_desc;
+	const struct rk805_pin_function *functions;
+	unsigned int num_functions;
+	const struct rk805_pin_group *groups;
+	int num_pin_groups;
+	const struct pinctrl_pin_desc *pins;
+	unsigned int num_pins;
+	struct rk805_pin_config *pin_cfg;
+};
+
+enum rk805_pinmux_option {
+	RK805_PINMUX_GPIO,
+};
+
+enum {
+	RK805_GPIO0,
+	RK805_GPIO1,
+};
+
+static const char *const rk805_gpio_groups[] = {
+	"gpio0",
+	"gpio1",
+};
+
+#define FUNCTION_GROUP(fname, mux, gname)			\
+	{							\
+		.name = #fname,					\
+		.groups = gname##_gpio_groups,			\
+		.ngroups = ARRAY_SIZE(gname##_gpio_groups),	\
+		.mux_option = RK805_PINMUX_##mux,		\
+	}
+
+#define PINGROUP(pg_name, pin_id)				\
+	{							\
+		.name = #pg_name,				\
+		.pins = {RK805_##pin_id},			\
+		.npins = 1,					\
+	}
+
+/* RK805: 2 output only GPIOs */
+static const struct pinctrl_pin_desc rk805_pins_desc[] = {
+	PINCTRL_PIN(RK805_GPIO0, "gpio0"),
+	PINCTRL_PIN(RK805_GPIO1, "gpio1"),
+};
+
+static const struct rk805_pin_function rk805_pin_functions[] = {
+	FUNCTION_GROUP(gpio, GPIO, rk805),
+};
+
+static const struct rk805_pin_group rk805_pin_groups[] = {
+	PINGROUP(gpio0, GPIO0),
+	PINGROUP(gpio1, GPIO1),
+};
+
+#define RK805_GPIO0_VAL_MSK	BIT(0)
+#define RK805_GPIO1_VAL_MSK	BIT(1)
+
+static struct rk805_pin_config rk805_gpio_cfgs[] = {
+	{
+		.reg = RK805_OUT_REG,
+		.val_msk = RK805_GPIO0_VAL_MSK,
+	},
+	{
+		.reg = RK805_OUT_REG,
+		.val_msk = RK805_GPIO1_VAL_MSK,
+	},
+};
+
+/* generic gpio chip */
+static int rk805_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct rk805_pctrl_info *pci = gpiochip_get_data(chip);
+	int ret, val;
+
+	ret = regmap_read(pci->rk808->regmap, pci->pin_cfg[offset].reg, &val);
+	if (ret) {
+		dev_err(pci->dev, "get gpio%d value failed\n", offset);
+		return ret;
+	}
+
+	return !!(val & pci->pin_cfg[offset].val_msk);
+}
+
+static void rk805_gpio_set(struct gpio_chip *chip,
+			   unsigned int offset,
+			   int value)
+{
+	struct rk805_pctrl_info *pci = gpiochip_get_data(chip);
+	int ret;
+
+	ret = regmap_update_bits(pci->rk808->regmap,
+				 pci->pin_cfg[offset].reg,
+				 pci->pin_cfg[offset].val_msk,
+				 value ? pci->pin_cfg[offset].val_msk : 0);
+	if (ret)
+		dev_err(pci->dev, "set gpio%d value %d failed\n",
+			offset, value);
+}
+
+static int rk805_gpio_direction_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int rk805_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	rk805_gpio_set(chip, offset, value);
+	return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct rk805_pctrl_info *pci = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	/* default output*/
+	if (!pci->pin_cfg[offset].dir_msk)
+		return 0;
+
+	ret = regmap_read(pci->rk808->regmap,
+			  pci->pin_cfg[offset].reg,
+			  &val);
+	if (ret) {
+		dev_err(pci->dev, "get gpio%d direction failed\n", offset);
+		return ret;
+	}
+
+	return !(val & pci->pin_cfg[offset].dir_msk);
+}
+
+static struct gpio_chip rk805_gpio_chip = {
+	.label			= "rk805-gpio",
+	.request		= gpiochip_generic_request,
+	.free			= gpiochip_generic_free,
+	.get_direction		= rk805_gpio_get_direction,
+	.get			= rk805_gpio_get,
+	.set			= rk805_gpio_set,
+	.direction_input	= rk805_gpio_direction_input,
+	.direction_output	= rk805_gpio_direction_output,
+	.can_sleep		= true,
+	.base			= -1,
+	.owner			= THIS_MODULE,
+};
+
+/* generic pinctrl */
+static int rk805_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	return pci->num_pin_groups;
+}
+
+static const char *rk805_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						unsigned int group)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	return pci->groups[group].name;
+}
+
+static int rk805_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					unsigned int group,
+					const unsigned int **pins,
+					unsigned int *num_pins)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = pci->groups[group].pins;
+	*num_pins = pci->groups[group].npins;
+
+	return 0;
+}
+
+static const struct pinctrl_ops rk805_pinctrl_ops = {
+	.get_groups_count = rk805_pinctrl_get_groups_count,
+	.get_group_name = rk805_pinctrl_get_group_name,
+	.get_group_pins = rk805_pinctrl_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int rk805_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	return pci->num_functions;
+}
+
+static const char *rk805_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+					       unsigned int function)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	return pci->functions[function].name;
+}
+
+static int rk805_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
+					 unsigned int function,
+					 const char *const **groups,
+					 unsigned int *const num_groups)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pci->functions[function].groups;
+	*num_groups = pci->functions[function].ngroups;
+
+	return 0;
+}
+
+static int _rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+				  unsigned int offset,
+				  int mux)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+	int ret;
+
+	if (!pci->pin_cfg[offset].fun_msk)
+		return 0;
+
+	if (mux == RK805_PINMUX_GPIO) {
+		ret = regmap_update_bits(pci->rk808->regmap,
+					 pci->pin_cfg[offset].reg,
+					 pci->pin_cfg[offset].fun_msk,
+					 pci->pin_cfg[offset].fun_msk);
+		if (ret) {
+			dev_err(pci->dev, "set gpio%d GPIO failed\n", offset);
+			return ret;
+		}
+	} else {
+		dev_err(pci->dev, "Couldn't find function mux %d\n", mux);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+				 unsigned int function,
+				 unsigned int group)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+	int mux = pci->functions[function].mux_option;
+	int offset = group;
+
+	return _rk805_pinctrl_set_mux(pctldev, offset, mux);
+}
+
+static int rk805_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+					struct pinctrl_gpio_range *range,
+					unsigned int offset, bool input)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+	int ret;
+
+	/* switch to gpio function */
+	ret = _rk805_pinctrl_set_mux(pctldev, offset, RK805_PINMUX_GPIO);
+	if (ret) {
+		dev_err(pci->dev, "set gpio%d mux failed\n", offset);
+		return ret;
+	}
+
+	/* set direction */
+	if (!pci->pin_cfg[offset].dir_msk)
+		return 0;
+
+	ret = regmap_update_bits(pci->rk808->regmap,
+				 pci->pin_cfg[offset].reg,
+				 pci->pin_cfg[offset].dir_msk,
+				 input ? 0 : pci->pin_cfg[offset].dir_msk);
+	if (ret) {
+		dev_err(pci->dev, "set gpio%d direction failed\n", offset);
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct pinmux_ops rk805_pinmux_ops = {
+	.get_functions_count	= rk805_pinctrl_get_funcs_count,
+	.get_function_name	= rk805_pinctrl_get_func_name,
+	.get_function_groups	= rk805_pinctrl_get_func_groups,
+	.set_mux		= rk805_pinctrl_set_mux,
+	.gpio_set_direction	= rk805_pmx_gpio_set_direction,
+};
+
+static int rk805_pinconf_get(struct pinctrl_dev *pctldev,
+			     unsigned int pin, unsigned long *config)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	u32 arg = 0;
+
+	switch (param) {
+	case PIN_CONFIG_OUTPUT:
+		arg = rk805_gpio_get(&pci->gpio_chip, pin);
+		break;
+	default:
+		dev_err(pci->dev, "Properties not supported\n");
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, (u16)arg);
+
+	return 0;
+}
+
+static int rk805_pinconf_set(struct pinctrl_dev *pctldev,
+			     unsigned int pin, unsigned long *configs,
+			     unsigned int num_configs)
+{
+	struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u32 i, arg = 0;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_OUTPUT:
+			rk805_gpio_set(&pci->gpio_chip, pin, arg);
+			rk805_pmx_gpio_set_direction(pctldev, NULL, pin, false);
+			break;
+		default:
+			dev_err(pci->dev, "Properties not supported\n");
+			return -ENOTSUPP;
+		}
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops rk805_pinconf_ops = {
+	.pin_config_get = rk805_pinconf_get,
+	.pin_config_set = rk805_pinconf_set,
+};
+
+static struct pinctrl_desc rk805_pinctrl_desc = {
+	.name = "rk805-pinctrl",
+	.pctlops = &rk805_pinctrl_ops,
+	.pmxops = &rk805_pinmux_ops,
+	.confops = &rk805_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static int rk805_pinctrl_probe(struct platform_device *pdev)
+{
+	struct rk805_pctrl_info *pci;
+	int ret;
+
+	pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL);
+	if (!pci)
+		return -ENOMEM;
+
+	pci->dev = &pdev->dev;
+	pci->dev->of_node = pdev->dev.parent->of_node;
+	pci->rk808 = dev_get_drvdata(pdev->dev.parent);
+
+	pci->pinctrl_desc = rk805_pinctrl_desc;
+	pci->gpio_chip = rk805_gpio_chip;
+	pci->gpio_chip.parent = &pdev->dev;
+	pci->gpio_chip.of_node = pdev->dev.parent->of_node;
+
+	platform_set_drvdata(pdev, pci);
+
+	switch (pci->rk808->variant) {
+	case RK805_ID:
+		pci->pins = rk805_pins_desc;
+		pci->num_pins = ARRAY_SIZE(rk805_pins_desc);
+		pci->functions = rk805_pin_functions;
+		pci->num_functions = ARRAY_SIZE(rk805_pin_functions);
+		pci->groups = rk805_pin_groups;
+		pci->num_pin_groups = ARRAY_SIZE(rk805_pin_groups);
+		pci->pinctrl_desc.pins = rk805_pins_desc;
+		pci->pinctrl_desc.npins = ARRAY_SIZE(rk805_pins_desc);
+		pci->pin_cfg = rk805_gpio_cfgs;
+		pci->gpio_chip.ngpio = ARRAY_SIZE(rk805_gpio_cfgs);
+		break;
+	default:
+		dev_err(&pdev->dev, "unsupported RK805 ID %lu\n",
+			pci->rk808->variant);
+		return -EINVAL;
+	}
+
+	/* Add gpio chip */
+	ret = devm_gpiochip_add_data(&pdev->dev, &pci->gpio_chip, pci);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't add gpiochip\n");
+		return ret;
+	}
+
+	/* Add pinctrl */
+	pci->pctl = devm_pinctrl_register(&pdev->dev, &pci->pinctrl_desc, pci);
+	if (IS_ERR(pci->pctl)) {
+		dev_err(&pdev->dev, "Couldn't add pinctrl\n");
+		return PTR_ERR(pci->pctl);
+	}
+
+	/* Add pin range */
+	ret = gpiochip_add_pin_range(&pci->gpio_chip, dev_name(&pdev->dev),
+				     0, 0, pci->gpio_chip.ngpio);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't add gpiochip pin range\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver rk805_pinctrl_driver = {
+	.probe = rk805_pinctrl_probe,
+	.driver = {
+		.name = "rk805-pinctrl",
+	},
+};
+module_platform_driver(rk805_pinctrl_driver);
+
+MODULE_DESCRIPTION("RK805 pin control and GPIO driver");
+MODULE_AUTHOR("Joseph Chen <chenjh@...k-chips.com>");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

Powered by blists - more mailing lists