linux-kernel - [PATCH v4 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1500636977-11934-3-git-send-email-varada@codeaurora.org>
Date:   Fri, 21 Jul 2017 17:06:12 +0530
From:   Varadarajan Narayanan <varada@...eaurora.org>
To:     bhelgaas@...gle.com, robh+dt@...nel.org, mark.rutland@....com,
        svarbanov@...sol.com, kishon@...com, sboyd@...eaurora.org,
        vivek.gautam@...eaurora.org, fengguang.wu@...el.com,
        weiyongjun1@...wei.com, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org
Cc:     Varadarajan Narayanan <varada@...eaurora.org>
Subject: [PATCH v4 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074

IPQ8074 uses QMP phy controller that provides support to PCIe and
USB. Adding dt binding information for the same.

Signed-off-by: Varadarajan Narayanan <varada@...eaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 5d7a51f..82fe0c4 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
 Required properties:
  - compatible: compatible list, contains:
+	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
 
@@ -38,6 +39,8 @@ Required properties:
 		 "phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
 		 "phy", "common".
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+		 "phy", "phy_phy".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -63,6 +66,11 @@ Required properties for child node:
  - clock-output-names: Name of the phy clock that will be the parent for
 		       the above pipe clock.
 
+	For "qcom,ipq8074-qmp-pcie-phy":
+		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
+			(or)
+		  "pcie20_phy1_pipe_clk"
+
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
  - reset-names: Must contain following for pcie qmp phys:
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation