linux-kernel - Re: [PATCH v5 0/2] add UniPhier thermal support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAK7LNARchNY8wA56+spLCUh99tsGpPQ9VuYc5ymnOL3cu0bd8g@mail.gmail.com>
Date:   Fri, 21 Jul 2017 22:24:17 +0900
From:   Masahiro Yamada <yamada.masahiro@...ionext.com>
To:     Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Cc:     rui.zhang@...el.com, Eduardo Valentin <edubezval@...il.com>,
        linux-pm@...r.kernel.org,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>,
        Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [PATCH v5 0/2] add UniPhier thermal support

2017-07-21 20:21 GMT+09:00 Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>:
> This series adds support for CPU temperature monitor modules implemented
> on UniPhier LD20 and PXs2 SoCs. This driver supports temperature monitoring
> and alert function on the module.
>
> Changes in v4:
> - fix warnings from sparse by replacing u32 with __be32

Nit.

Your subject prefix indicates this patch is v5.

Do you mean "Changes in v5" or "Changes since v4" ?






> Changes in v3:
> - remove TMOD_MASK and use TMOD_WIDTH representing the bit width of TMOD
>
> Changes in v2:
> - add nsleep after starting and stopping PVT
> - replace temperature calculation with sign_extend32()
>
> Changes in v1:
> - separate dts from this patchset as another patchset
> - remove 'reg' description on the dt-bindings document
> - fix the order of calling initialization functions
> - replace mask bits to use GENMASK
> - fix calculation of temperature because of not considering a negative value
> - use devm_request_threaded_irq() instead of devm_request_irq() and
>   separate a thread function from the interrupt handler
> - add dependency to Kconfig
> - set 120C to CRITICAL_TEMP_LIMIT as maximum temperature
> - shrink each line of parameters to save the number of lines
> - improve some comments and copyright description
>
> Kunihiko Hayashi (2):
>   dt-bindings: thermal: add binding documentation for UniPhier thermal
>     monitor
>   thermal: uniphier: add UniPhier thermal driver
>
>  .../bindings/thermal/uniphier-thermal.txt          |  64 ++++
>  drivers/thermal/Kconfig                            |   8 +
>  drivers/thermal/Makefile                           |   1 +
>  drivers/thermal/uniphier_thermal.c                 | 386 +++++++++++++++++++++
>  4 files changed, 459 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/uniphier-thermal.txt
>  create mode 100644 drivers/thermal/uniphier_thermal.c
>
> --
> 2.7.4
>



-- 
Best Regards
Masahiro Yamada