lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1500882445-29008-10-git-send-email-varada@codeaurora.org>
Date:   Mon, 24 Jul 2017 13:17:20 +0530
From:   Varadarajan Narayanan <varada@...eaurora.org>
To:     broonie@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
        andy.gross@...aro.org, david.brown@...aro.org,
        linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-soc@...r.kernel.org
Cc:     Varadarajan Narayanan <varada@...eaurora.org>,
        Matthew McClintock <mmcclint@...eaurora.org>
Subject: [PATCH v5 09/14] spi: qup: call io_config in mode specific function

DMA transactions should only only need to call io_config only once, but
block mode might call it several times to setup several transactions so
it can handle reads/writes larger than the max size per transaction, so
we move the call to the do_ functions.

This is just refactoring, there should be no functional change

Signed-off-by: Matthew McClintock <mmcclint@...eaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@...eaurora.org>
---
 drivers/spi/spi-qup.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 82593f6..b2bda47 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -156,6 +156,8 @@ struct spi_qup {
 	struct dma_slave_config	tx_conf;
 };
 
+static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer);
+
 static inline bool spi_qup_is_flag_set(struct spi_qup *controller, u32 flag)
 {
 	u32 opflag = readl_relaxed(controller->base + QUP_OPERATIONAL);
@@ -417,10 +419,12 @@ static void spi_qup_dma_terminate(struct spi_master *master,
 		dmaengine_terminate_all(master->dma_rx);
 }
 
-static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
+static int spi_qup_do_dma(struct spi_device *spi, struct spi_transfer *xfer,
 			  unsigned long timeout)
 {
 	dma_async_tx_callback rx_done = NULL, tx_done = NULL;
+	struct spi_master *master = spi->master;
+	struct spi_qup *qup = spi_master_get_devdata(master);
 	int ret;
 
 	if (xfer->rx_buf)
@@ -428,6 +432,10 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
 	else if (xfer->tx_buf)
 		tx_done = spi_qup_dma_done;
 
+	ret = spi_qup_io_config(spi, xfer);
+	if (ret)
+		return ret;
+
 	/* before issuing the descriptors, set the QUP to run */
 	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
 	if (ret) {
@@ -461,12 +469,17 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
 	return 0;
 }
 
-static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
+static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
 			  unsigned long timeout)
 {
+	struct spi_master *master = spi->master;
 	struct spi_qup *qup = spi_master_get_devdata(master);
 	int ret;
 
+	ret = spi_qup_io_config(spi, xfer);
+	if (ret)
+		return ret;
+
 	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
 	if (ret) {
 		dev_warn(qup->dev, "cannot set RUN state\n");
@@ -744,10 +757,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	if (ret)
 		return ret;
 
-	ret = spi_qup_io_config(spi, xfer);
-	if (ret)
-		return ret;
-
 	timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
 	timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
 	timeout = 100 * msecs_to_jiffies(timeout);
@@ -762,9 +771,9 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	spin_unlock_irqrestore(&controller->lock, flags);
 
 	if (spi_qup_is_dma_xfer(controller->mode))
-		ret = spi_qup_do_dma(master, xfer, timeout);
+		ret = spi_qup_do_dma(spi, xfer, timeout);
 	else
-		ret = spi_qup_do_pio(master, xfer, timeout);
+		ret = spi_qup_do_pio(spi, xfer, timeout);
 
 	if (ret)
 		goto exit;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ