lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Jul 2017 14:52:57 +0200 From: Gary Bisson <gary.bisson@...ndarydevices.com> To: Fabio Estevam <festevam@...il.com> Cc: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>, linux-kernel <linux-kernel@...r.kernel.org>, "robh+dt@...nel.org" <robh+dt@...nel.org>, Sascha Hauer <kernel@...gutronix.de>, Fabio Estevam <fabio.estevam@....com>, Shawn Guo <shawnguo@...nel.org>, "linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org> Subject: Re: [PATCH 1/2] ARM: dts: imx6qdl-sabrelite: fix USB PHY reset Hi Fabio, On Mon, Jul 24, 2017 at 2:49 PM, Fabio Estevam <festevam@...il.com> wrote: > > Hi Gary, > > On Mon, Jul 24, 2017 at 5:50 AM, Gary Bisson > <gary.bisson@...ndarydevices.com> wrote: > > > + > > + reg_usb_h1_vbus: regulator@7 { > > + compatible = "regulator-fixed"; > > + reg = <7>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usbh1>; > > + regulator-name = "usb_h1_vbus"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + regulator-always-on; > > As this regulator is controlled via GPIO I believe you should remove > the ' regulator-always-on' property. > > Same applies to 2/2/ Good catch, I'll send a v2 right away. Thanks, Gary
Powered by blists - more mailing lists