[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170725063008.GB2016@tuxbook>
Date: Mon, 24 Jul 2017 23:30:08 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Vivek Gautam <vivek.gautam@...eaurora.org>
Cc: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
linux-soc@...r.kernel.org,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 5/5] arm64: dts: msm8996: Add QFPROM node
On Mon 24 Jul 23:09 PDT 2017, Vivek Gautam wrote:
> Hi Bjorn,
>
>
> On Tue, Jul 25, 2017 at 11:17 AM, Bjorn Andersson
> <bjorn.andersson@...aro.org> wrote:
> > From: Vivek Gautam <vivek.gautam@...eaurora.org>
> >
> > Signed-off-by: Vivek Gautam <vivek.gautam@...eaurora.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > ---
> > arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > index 395666dcce1b..d0865d2f731e 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > @@ -496,6 +496,17 @@
> > status = "disabled";
> > };
> >
> > + qfprom: qfprom@...00 {
> > + compatible = "qcom,qfprom";
> > + reg = <0x00074000 0x8ff>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + qusb2p_hstx_trim: hstx_trim@24e {
> > + reg = <0x24e 0x2>;
> > + bits = <5 4>;
> > + };
>
> There's one more part to it which will be used by the secondary
> USB2 controller.
> I was hoping to add this patch along with the USB device tree patches.
> Let me know if you are not using this patch for anything now, i can
> submit it along with the usb series.
>
I omitted this due to the rpmcc dependency. But I must have looked at
the wrong node, as there is no such dependency.
So this should be replaced by the full 0387312d9f35 ("arm64: dts:
msm8996: Add device node for qcom qusb2 phy"), which has a commit
message as well.
Thanks for spotting my mistake.
Regards,
Bjorn
Powered by blists - more mailing lists