06:18 Linux version 4.12.0-1.fc27.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.1.1 20170526 (Red Hat 7.1.1-2) (GCC) ) #1 SMP Mon Jul 3 15:45:36 UTC 2017 06:18 Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1.fc27.x86_64 root=/dev/sda2 ro selinux=0 kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0 systemd.log_level=info systemd.log_target=kmsg acpi_backlight=vendor log_buf_len=2M quiet 06:18 x86/fpu: x87 FPU will use FXSAVE 06:18 e820: BIOS-provided physical RAM map: 06:18 BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable 06:18 BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved 06:18 BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved 06:18 BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable 06:18 BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data 06:18 BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS 06:18 BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved 06:18 BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved 06:18 BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved 06:18 BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved 06:18 BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved 06:18 BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved 06:18 BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 06:18 BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved 06:18 BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable 06:18 NX (Execute Disable) protection: active 06:18 SMBIOS 2.4 present. 06:18 DMI: LENOVO 6464CTO/6464CTO, BIOS 7LETC9WW (2.29 ) 03/18/2011 06:18 tsc: Fast TSC calibration failed 06:18 tsc: Using PIT calibration value 06:18 e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000 06:18 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT 06:18 e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 06:18 found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff8919400f68f0] 06:18 log_buf_len: 2097152 bytes 06:18 early log buf free: 258320(98%) 06:18 RAMDISK: [mem 0x3634d000-0x3719efff] 06:18 ACPI: Early table checksum verification disabled 06:18 ACPI: RSDP 0x00000000000F68C0 000024 (v02 LENOVO) 06:18 ACPI: XSDT 0x00000000BF6BB496 00009C (v01 LENOVO TP-7U 00002290 LTP 00000000) 06:18 ACPI: FACP 0x00000000BF6BB600 0000F4 (v03 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-603) 06:18 ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170303/tbfadt-658) 06:18 ACPI: DSDT 0x00000000BF6BBA1D 01003C (v01 LENOVO TP-7U 00002290 MSFT 03000000) 06:18 ACPI: FACS 0x00000000BF6E4000 000040 06:18 ACPI: FACS 0x00000000BF6E4000 000040 06:18 ACPI: SSDT 0x00000000BF6BB7B4 000269 (v01 LENOVO TP-7U 00002290 MSFT 03000000) 06:18 ACPI: ECDT 0x00000000BF6CBA59 000052 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: TCPA 0x00000000BF6CBAAB 000032 (v02 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: APIC 0x00000000BF6CBADD 000068 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: MCFG 0x00000000BF6CBB45 00003C (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: HPET 0x00000000BF6CBB81 000038 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: SLIC 0x00000000BF6CBBB9 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000) 06:18 ACPI: SLAC 0x00000000BF6CBDF0 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000) 06:18 ACPI: BOOT 0x00000000BF6CBF66 000028 (v01 LENOVO TP-7U 00002290 LTP 00000001) 06:18 ACPI: ASF! 0x00000000BF6CBF8E 000072 (v16 LENOVO TP-7U 00002290 PTL 00000001) 06:18 ACPI: SSDT 0x00000000BF6E26D9 00025F (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 ACPI: SSDT 0x00000000BF6E2938 0000A6 (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 ACPI: SSDT 0x00000000BF6E29DE 0004F7 (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 ACPI: SSDT 0x00000000BF6E2ED5 0001D8 (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 No NUMA configuration found 06:18 Faking a node at [mem 0x0000000000000000-0x000000013bffffff] 06:18 NODE_DATA(0) allocated [mem 0x13bdd5000-0x13bdfffff] 06:18 Zone ranges: 06:18 DMA [mem 0x0000000000001000-0x0000000000ffffff] 06:18 DMA32 [mem 0x0000000001000000-0x00000000ffffffff] 06:18 Normal [mem 0x0000000100000000-0x000000013bffffff] 06:18 Device empty 06:18 Movable zone start for each node 06:18 Early memory node ranges 06:18 node 0: [mem 0x0000000000001000-0x000000000009cfff] 06:18 node 0: [mem 0x0000000000100000-0x00000000bf6affff] 06:18 node 0: [mem 0x0000000100000000-0x000000013bffffff] 06:18 Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff] 06:18 Reserving Intel graphics memory at 0x00000000bf800000-0x00000000bfffffff 06:18 ACPI: PM-Timer IO Port: 0x1008 06:18 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 06:18 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 06:18 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 06:18 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 06:18 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 06:18 Using ACPI (MADT) for SMP configuration information 06:18 ACPI: HPET id: 0x8086a201 base: 0xfed00000 06:18 smpboot: Allowing 2 CPUs, 0 hotplug CPUs 06:18 PM: Registered nosave memory: [mem 0x00000000-0x00000fff] 06:18 PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] 06:18 PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] 06:18 PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] 06:18 PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] 06:18 PM: Registered nosave memory: [mem 0xbf6b0000-0xbf6cbfff] 06:18 PM: Registered nosave memory: [mem 0xbf6cc000-0xbf6fffff] 06:18 PM: Registered nosave memory: [mem 0xbf700000-0xbfffffff] 06:18 PM: Registered nosave memory: [mem 0xc0000000-0xefffffff] 06:18 PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] 06:18 PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] 06:18 PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] 06:18 PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] 06:18 PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff] 06:18 PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] 06:18 PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] 06:18 PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] 06:18 PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] 06:18 PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] 06:18 PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] 06:18 PM: Registered nosave memory: [mem 0xff000000-0xffffffff] 06:18 e820: [mem 0xc0000000-0xefffffff] available for PCI devices 06:18 Booting paravirtualized kernel on bare hardware 06:18 clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns 06:18 setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 06:18 percpu: Embedded 37 pages/cpu @ffff891a7ba00000 s111640 r8192 d31720 u1048576 06:18 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013596 06:18 Policy zone: Normal 06:18 Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1.fc27.x86_64 root=/dev/sda2 ro selinux=0 kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0 systemd.log_level=info systemd.log_target=kmsg acpi_backlight=vendor log_buf_len=2M quiet 06:18 PID hash table entries: 4096 (order: 3, 32768 bytes) 06:18 Memory: 3948948K/4118832K available (8693K kernel code, 2407K rwdata, 3692K rodata, 2164K init, 1980K bss, 169884K reserved, 0K cma-reserved) 06:18 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 06:18 ftrace: allocating 34435 entries in 135 pages 06:18 06:18 ********************************************************** 06:18 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** 06:18 ** ** 06:18 ** trace_printk() being used. Allocating extra memory. ** 06:18 ** ** 06:18 ** This means that this is a DEBUG kernel and it is ** 06:18 ** unsafe for production use. ** 06:18 ** ** 06:18 ** If you see this message and you are not debugging ** 06:18 ** the kernel, report this immediately to your vendor! ** 06:18 ** ** 06:18 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** 06:18 ********************************************************** 06:18 Hierarchical RCU implementation. 06:18 #011RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. 06:18 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 06:18 NR_IRQS:524544 nr_irqs:440 16 06:18 #011Offload RCU callbacks from all CPUs 06:18 #011Offload RCU callbacks from CPUs: 0-1. 06:18 Console: colour VGA+ 80x25 06:18 console [tty0] enabled 06:18 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns 06:18 tsc: Fast TSC calibration using PIT 06:18 tsc: Detected 2194.450 MHz processor 06:18 Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.90 BogoMIPS (lpj=2194450) 06:18 pid_max: default: 32768 minimum: 301 06:18 ACPI: Core revision 20170303 06:18 ACPI: 6 ACPI AML tables successfully acquired and loaded 06:18 Security Framework initialized 06:18 Yama: becoming mindful. 06:18 SELinux: Disabled at boot. 06:18 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) 06:18 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) 06:18 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) 06:18 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) 06:18 CPU: Physical Processor ID: 0 06:18 CPU: Processor Core ID: 0 06:18 mce: CPU supports 6 MCE banks 06:18 CPU0: Thermal monitoring enabled (TM2) 06:18 process: using mwait in idle threads 06:18 Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 06:18 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 06:18 Freeing SMP alternatives memory: 32K 06:18 smpboot: Max logical packages: 1 06:18 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 06:18 smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (family: 0x6, model: 0xf, stepping: 0xa) 06:18 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. 06:18 core: PEBS disabled due to CPU errata 06:18 ... version: 2 06:18 ... bit width: 40 06:18 ... generic registers: 2 06:18 ... value mask: 000000ffffffffff 06:18 ... max period: 000000007fffffff 06:18 ... fixed-purpose events: 3 06:18 ... event mask: 0000000700000003 06:18 NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. 06:18 smp: Bringing up secondary CPUs ... 06:18 x86: Booting SMP configuration: 06:18 .... node #0, CPUs: #1 06:18 TSC synchronization [CPU#0 -> CPU#1]: 06:18 Measured 399465 cycles TSC warp between CPUs, turning off TSC clock. 06:18 tsc: Marking TSC unstable due to check_tsc_sync_source failed 06:18 smp: Brought up 1 node, 2 CPUs 06:18 smpboot: Total of 2 processors activated (8777.65 BogoMIPS) 06:18 devtmpfs: initialized 06:18 x86/mm: Memory block size: 128MB 06:18 PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes) 06:18 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns 06:18 futex hash table entries: 512 (order: 3, 32768 bytes) 06:18 pinctrl core: initialized pinctrl subsystem 06:18 RTC time: 18:06:17, date: 07/24/17 06:18 NET: Registered protocol family 16 06:18 cpuidle: using governor menu 06:18 PCCT header not found. 06:18 Simple Boot Flag at 0x35 set to 0x1 06:18 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it 06:18 ACPI: bus type PCI registered 06:18 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 06:18 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) 06:18 PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 06:18 pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override. 06:18 PCI: Using configuration type 1 for base access 06:18 HugeTLB registered 2 MB page size, pre-allocated 0 pages 06:18 ACPI: Added _OSI(Module Device) 06:18 ACPI: Added _OSI(Processor Device) 06:18 ACPI: Added _OSI(3.0 _SCP Extensions) 06:18 ACPI: Added _OSI(Processor Aggregator Device) 06:18 ACPI : EC: EC started 06:18 ACPI : EC: interrupt blocked 06:18 ACPI: \: Used as first EC 06:18 ACPI: \: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 06:18 ACPI: \: Used as boot ECDT EC to handle transactions 06:18 ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A76063000 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A77254000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A7605CF00 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A760779C0 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) 06:18 ACPI : EC: EC stopped 06:18 ACPI : EC: EC started 06:18 ACPI : EC: interrupt blocked 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions 06:18 ACPI: Interpreter enabled 06:18 ACPI: (supports S0 S3 S4 S5) 06:18 ACPI: Using IOAPIC for interrupt routing 06:18 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 06:18 ACPI: Power Resource [PUBS] (on) 06:18 acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) 06:18 acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) 06:18 acpi IBM0079:00: ACPI dock station (docks/bays count: 3) 06:18 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) 06:18 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 06:18 acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 06:18 acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] 06:18 acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration 06:18 acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge 06:18 PCI host bridge to bus 0000:00 06:18 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 06:18 pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] 06:18 pci_bus 0000:00: root bus resource [bus 00-ff] 06:18 pci 0000:00:19.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1a.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1a.1: System wakeup disabled by ACPI 06:18 pci 0000:00:1a.7: System wakeup disabled by ACPI 06:18 pci 0000:00:1b.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1c.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1c.1: System wakeup disabled by ACPI 06:18 pci 0000:00:1c.2: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.1: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.2: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.7: System wakeup disabled by ACPI 06:18 pci 0000:00:1e.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO 06:18 pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO 06:18 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) 06:18 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) 06:18 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] 06:18 pci 0000:00:1c.0: PCI bridge to [bus 02] 06:18 pci 0000:00:1c.1: PCI bridge to [bus 03] 06:18 pci 0000:00:1c.2: PCI bridge to [bus 04] 06:18 pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) 06:18 pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller 06:18 pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) 06:18 ACPI: Enabled 3 GPEs in block 00 to 1F 06:18 ACPI : EC: interrupt unblocked 06:18 ACPI : EC: event unblocked 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events 06:18 pci 0000:00:02.0: vgaarb: setting as boot VGA device 06:18 pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none 06:18 pci 0000:00:02.0: vgaarb: bridge control possible 06:18 vgaarb: loaded 06:18 SCSI subsystem initialized 06:18 ACPI: bus type USB registered 06:18 usbcore: registered new interface driver usbfs 06:18 usbcore: registered new interface driver hub 06:18 usbcore: registered new device driver usb 06:18 EDAC MC: Ver: 3.0.0 06:18 PCI: Using ACPI for IRQ routing 06:18 NetLabel: Initializing 06:18 NetLabel: domain hash size = 128 06:18 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO 06:18 NetLabel: unlabeled traffic allowed by default 06:18 HPET: 3 timers in total, 0 timers will be used for per-cpu timer 06:18 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 06:18 hpet0: 3 comparators, 64-bit 14.318180 MHz counter 06:18 clocksource: Switched to clocksource hpet 06:18 VFS: Disk quotas dquot_6.6.0 06:18 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 06:18 pnp: PnP ACPI init 06:18 system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved 06:18 system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved 06:18 system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved 06:18 system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved 06:18 system 00:00: [mem 0x000cc000-0x000cffff] has been reserved 06:18 system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved 06:18 system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved 06:18 system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved 06:18 system 00:00: [mem 0x000ec000-0x000effff] could not be reserved 06:18 system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved 06:18 system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved 06:18 system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved 06:18 system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved 06:18 system 00:01: [io 0x164e-0x164f] has been reserved 06:18 system 00:01: [io 0x1000-0x107f] has been reserved 06:18 system 00:01: [io 0x1180-0x11bf] has been reserved 06:18 system 00:01: [io 0x0800-0x080f] has been reserved 06:18 system 00:01: [io 0x15e0-0x15ef] has been reserved 06:18 system 00:01: [io 0x1600-0x165f] could not be reserved 06:18 system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved 06:18 system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved 06:18 system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved 06:18 system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved 06:18 system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved 06:18 system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved 06:18 pnp: PnP ACPI: found 6 devices 06:18 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 06:18 pci 0000:00:1c.0: PCI bridge to [bus 02] 06:18 pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] 06:18 pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] 06:18 pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] 06:18 pci 0000:00:1c.1: PCI bridge to [bus 03] 06:18 pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] 06:18 pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf6fffff] 06:18 pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] 06:18 pci 0000:00:1c.2: PCI bridge to [bus 04] 06:18 pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] 06:18 pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] 06:18 pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] 06:18 pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] 06:18 pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] 06:18 pci 0000:15:00.0: BAR 13: assigned [io 0x6000-0x60ff] 06:18 pci 0000:15:00.0: BAR 14: assigned [io 0x6400-0x64ff] 06:18 pci 0000:15:00.0: CardBus bridge to [bus 16-17] 06:18 pci 0000:15:00.0: bridge window [io 0x6000-0x60ff] 06:18 pci 0000:15:00.0: bridge window [io 0x6400-0x64ff] 06:18 pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] 06:18 pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] 06:18 pci 0000:00:1e.0: PCI bridge to [bus 15-18] 06:18 pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] 06:18 pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] 06:18 pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] 06:18 NET: Registered protocol family 2 06:18 TCP established hash table entries: 32768 (order: 6, 262144 bytes) 06:18 TCP bind hash table entries: 32768 (order: 7, 524288 bytes) 06:18 TCP: Hash tables configured (established 32768 bind 32768) 06:18 UDP hash table entries: 2048 (order: 4, 65536 bytes) 06:18 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) 06:18 NET: Registered protocol family 1 06:18 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 06:18 Unpacking initramfs... 06:18 Freeing initrd memory: 14664K 06:18 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 06:18 software IO TLB [mem 0xbb6b0000-0xbf6b0000] (64MB) mapped at [ffff8919fb6b0000-ffff8919ff6affff] 06:18 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa1b8037fd, max_idle_ns: 440795241812 ns 06:18 Initialise system trusted keyrings 06:18 Key type blacklist registered 06:18 workingset: timestamp_bits=36 max_order=20 bucket_order=0 06:18 zbud: loaded 06:18 NET: Registered protocol family 38 06:18 Key type asymmetric registered 06:18 Asymmetric key parser 'x509' registered 06:18 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 06:18 io scheduler noop registered 06:18 io scheduler deadline registered 06:18 io scheduler cfq registered (default) 06:18 io scheduler mq-deadline registered 06:18 atomic64_test: passed for x86-64 platform with CX8 and with SSE 06:18 pcieport 0000:00:1c.0: Signaling PME with IRQ 24 06:18 pcieport 0000:00:1c.1: Signaling PME with IRQ 25 06:18 pcieport 0000:00:1c.2: Signaling PME with IRQ 26 06:18 pciehp 0000:00:1c.0:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 06:18 pciehp 0000:00:1c.1:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 06:18 pciehp 0000:00:1c.2:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 06:18 ACPI: AC Adapter [AC] (on-line) 06:18 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 06:18 ACPI: Lid Switch [LID] 06:18 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 06:18 ACPI: Sleep Button [SLPB] 06:18 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 06:18 ACPI: Power Button [PWRF] 06:18 (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 06:18 thermal LNXTHERM:00: registered as thermal_zone0 06:18 ACPI: Thermal Zone [THM0] (54 C) 06:18 thermal LNXTHERM:01: registered as thermal_zone1 06:18 ACPI: Thermal Zone [THM1] (51 C) 06:18 GHES: HEST is not enabled! 06:18 Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 06:18 Non-volatile memory driver v1.3 06:18 Linux agpgart interface v0.103 06:18 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode 06:18 ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 06:18 scsi host0: ahci 06:18 scsi host1: ahci 06:18 scsi host2: ahci 06:18 ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 27 06:18 ata2: DUMMY 06:18 ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 27 06:18 random: fast init done 06:18 scsi host3: ata_piix 06:18 scsi host4: ata_piix 06:18 ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 06:18 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 06:18 libphy: Fixed MDIO Bus: probed 06:18 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 06:18 ehci-pci: EHCI PCI platform driver 06:18 ehci-pci 0000:00:1a.7: EHCI Host Controller 06:18 ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 06:19 ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00 06:19 ACPI: Battery Slot [BAT0] (battery present) 06:19 ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 06:19 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 06:19 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb1: Product: EHCI Host Controller 06:19 usb usb1: Manufacturer: Linux 4.12.0-1.fc27.x86_64 ehci_hcd 06:19 usb usb1: SerialNumber: 0000:00:1a.7 06:19 hub 1-0:1.0: USB hub found 06:19 hub 1-0:1.0: 4 ports detected 06:19 ehci-pci 0000:00:1d.7: EHCI Host Controller 06:19 ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 06:19 ehci-pci 0000:00:1d.7: debug port 1 06:19 ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000 06:19 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 06:19 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 06:19 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb2: Product: EHCI Host Controller 06:19 usb usb2: Manufacturer: Linux 4.12.0-1.fc27.x86_64 ehci_hcd 06:19 usb usb2: SerialNumber: 0000:00:1d.7 06:19 hub 2-0:1.0: USB hub found 06:19 hub 2-0:1.0: 6 ports detected 06:19 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 06:19 ohci-pci: OHCI PCI platform driver 06:19 uhci_hcd: USB Universal Host Controller Interface driver 06:19 uhci_hcd 0000:00:1a.0: UHCI Host Controller 06:19 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 06:19 uhci_hcd 0000:00:1a.0: detected 2 ports 06:19 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 06:19 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb3: Product: UHCI Host Controller 06:19 usb usb3: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb3: SerialNumber: 0000:00:1a.0 06:19 hub 3-0:1.0: USB hub found 06:19 hub 3-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1a.1: UHCI Host Controller 06:19 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 06:19 uhci_hcd 0000:00:1a.1: detected 2 ports 06:19 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 06:19 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb4: Product: UHCI Host Controller 06:19 usb usb4: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb4: SerialNumber: 0000:00:1a.1 06:19 hub 4-0:1.0: USB hub found 06:19 hub 4-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1d.0: UHCI Host Controller 06:19 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 06:19 uhci_hcd 0000:00:1d.0: detected 2 ports 06:19 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 06:19 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb5: Product: UHCI Host Controller 06:19 usb usb5: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb5: SerialNumber: 0000:00:1d.0 06:19 hub 5-0:1.0: USB hub found 06:19 hub 5-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1d.1: UHCI Host Controller 06:19 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 06:19 uhci_hcd 0000:00:1d.1: detected 2 ports 06:19 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 06:19 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb6: Product: UHCI Host Controller 06:19 usb usb6: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb6: SerialNumber: 0000:00:1d.1 06:19 hub 6-0:1.0: USB hub found 06:19 hub 6-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1d.2: UHCI Host Controller 06:19 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 06:19 uhci_hcd 0000:00:1d.2: detected 2 ports 06:19 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 06:19 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb7: Product: UHCI Host Controller 06:19 usb usb7: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb7: SerialNumber: 0000:00:1d.2 06:19 hub 7-0:1.0: USB hub found 06:19 hub 7-0:1.0: 2 ports detected 06:19 usbcore: registered new interface driver usbserial 06:19 usbcore: registered new interface driver usbserial_generic 06:19 usbserial: USB Serial support registered for generic 06:19 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 06:19 serio: i8042 KBD port at 0x60,0x64 irq 1 06:19 serio: i8042 AUX port at 0x60,0x64 irq 12 06:19 mousedev: PS/2 mouse device common for all mice 06:19 rtc_cmos 00:02: RTC can wake from S4 06:19 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 06:19 rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs 06:19 device-mapper: uevent: version 1.0.3 06:19 device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 06:19 hidraw: raw HID events driver (C) Jiri Kosina 06:19 usbcore: registered new interface driver usbhid 06:19 usbhid: USB HID core driver 06:19 drop_monitor: Initializing network drop monitor service 06:19 ip_tables: (C) 2000-2006 Netfilter Core Team 06:19 Initializing XFRM netlink socket 06:19 NET: Registered protocol family 10 06:19 Segment Routing with IPv6 06:19 mip6: Mobile IPv6 06:19 NET: Registered protocol family 17 06:19 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 06:19 RAS: Correctable Errors collector initialized. 06:19 microcode: sig=0x6fa, pf=0x80, revision=0x95 06:19 microcode: Microcode Update Driver: v2.2. 06:19 registered taskstats version 1 06:19 Loading compiled-in X.509 certificates 06:19 alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) 06:19 Loaded X.509 cert 'Fedora kernel signing key: afce39acf6b4e14fc753ae848b4302f3a65b72e0' 06:19 zswap: loaded using pool lzo/zbud 06:19 Key type big_key registered 06:19 Key type encrypted registered 06:19 Magic number: 9:783:140 06:19 acpi device:11: hash matches 06:19 rtc_cmos 00:02: setting system clock to 2017-07-24 18:06:18 UTC (1500919578) 06:19 ata4.00: ATAPI: MATSHITADVD-RAM UJ-842 z, RC01, max UDMA/33 06:19 ata4.00: configured for UDMA/33 06:19 ata3: SATA link down (SStatus 0 SControl 300) 06:19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 06:19 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 06:19 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 06:19 ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 06:19 ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA 06:19 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 06:19 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 06:19 ata1.00: configured for UDMA/133 06:19 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 06:19 sd 0:0:0:0: Attached scsi generic sg0 type 0 06:19 sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) 06:19 sd 0:0:0:0: [sda] Write Protect is off 06:19 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 06:19 sda: sda1 sda2 sda3 sda4 < sda5 sda6 > 06:19 scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 z RC01 PQ: 0 ANSI: 5 06:19 sd 0:0:0:0: [sda] Attached SCSI disk 06:19 usb 2-2: new high-speed USB device number 2 using ehci-pci 06:19 sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray 06:19 cdrom: Uniform CD-ROM driver Revision: 3.20 06:19 sr 3:0:0:0: Attached scsi generic sg1 type 5 06:19 Freeing unused kernel memory: 2164K 06:19 Write protecting the kernel read-only data: 14336k 06:19 Freeing unused kernel memory: 1532K 06:19 Freeing unused kernel memory: 404K 06:19 x86/mm: Checked W+X mappings: passed, no W+X pages found. 06:19 rodata_test: all tests were successful 06:19[1]: Starting Create list of required static device nodes for the current kernel... 06:19 kernel profiling enabled schedstats, disable via kernel.sched_schedstats. 06:19 usb 2-2: New USB device found, idVendor=1058, idProduct=10a8 06:19 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 06:19 usb 2-2: Product: Elements 10A8 06:19 usb 2-2: Manufacturer: Western Digital 06:19 usb 2-2: SerialNumber: 5758333145373354504C3031 06:19 usb-storage 2-2:1.0: USB Mass Storage device detected 06:19 scsi host5: usb-storage 2-2:1.0 06:19 usbcore: registered new interface driver usb-storage 06:19 usbcore: registered new interface driver uas 06:19 usb 3-2: new full-speed USB device number 2 using uhci_hcd 06:19 usb 3-2: New USB device found, idVendor=0483, idProduct=2016 06:19 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 06:19 usb 3-2: Product: Biometric Coprocessor 06:19 usb 3-2: Manufacturer: STMicroelectronics 06:19 psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0/0x0, board id: 0, fw id: 496542 06:19 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 06:19 pci 0000:00:1e.0: enabling device (0005 -> 0007) 06:19 yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] 06:19 sdhci: Secure Digital Host Controller Interface driver 06:19 sdhci: Copyright(c) Pierre Ossman 06:19 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 06:19 yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 06:19 yenta_cardbus 0000:15:00.0: Socket status: 30000006 06:19 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x6000-0x9fff] 06:19 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff] 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff: 06:19 excluding 0xf8300000-0xf86cffff 06:19 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref] 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff: 06:19 excluding 0xf4000000-0xf7ffffff 06:19 sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) 06:19 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 06:19 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 06:19 mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA 06:19 EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: 06:19 excluding 0xc0000-0xcffff 0xe0000-0xfffff 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: 06:19 excluding 0xa0000000-0xa0ffffff 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: 06:19 excluding 0x60000000-0x60ffffff 06:19 pci 0000:00:00.0: Intel 965GM Chipset 06:19 pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable 06:19 pci 0000:00:00.0: detected 8192K stolen memory 06:19 [drm] Memory usable by graphics device = 512M 06:19 [drm] Replacing VGA console driver 06:19 Console: switching to colour dummy device 80x25 06:19 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 06:19 [drm] Driver supports precise vblank timestamp query. 06:19 i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem 06:19 mmc0: new high speed SDHC card at address aaaa 06:19 [drm] RC6 disabled, disabling runtime PM support 06:19 [drm] initialized overlay support 06:19 [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 06:19 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) 06:19 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 06:20 fbcon: inteldrmfb (fb0) is primary device 06:20 scsi 5:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 06:20 sd 5:0:0:0: Attached scsi generic sg2 type 0 06:20 sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 06:20 sd 5:0:0:0: [sdb] Write Protect is off 06:20 sd 5:0:0:0: [sdb] No Caching mode page found 06:20 sd 5:0:0:0: [sdb] Assuming drive cache: write through 06:20 sdb: sdb1 sdb2 06:20 sd 5:0:0:0: [sdb] Attached SCSI disk 06:20 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 06:20 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 06:20 Console: switching to colour frame buffer device 210x65 06:20 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device 06:20 systemd: 73 output lines suppressed due to ratelimiting 06:20 EXT4-fs (sda2): re-mounted. Opts: data=ordered 06:20 loop: module loaded 06:20 RPC: Registered named UNIX socket transport module. 06:20 RPC: Registered udp transport module. 06:20 RPC: Registered tcp transport module. 06:20 RPC: Registered tcp NFSv4.1 backchannel transport module. 06:21 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 06:21 wmi: Mapper loaded 06:21 pps_core: LinuxPPS API ver. 1 registered 06:21 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 06:21 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 06:21 PTP clock support registered 06:21 thinkpad_acpi: ThinkPad ACPI Extras v0.25 06:21 thinkpad_acpi: http://ibm-acpi.sf.net/ 06:21 thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08 06:21 thinkpad_acpi: Lenovo ThinkPad T61, model 6464CTO 06:21 mmcblk0: mmc0:aaaa SL32G 29.7 GiB 06:21 mmcblk0: p1 06:21 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: 06:21 ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20170303/utaddress-247) 06:21 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 06:21 excluding 0xc0000-0xcffff 0xe0000-0xfffff 06:21 pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: 06:21 excluding 0xa0000000-0xa0ffffff 06:21 pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: 06:21 excluding 0x60000000-0x60ffffff 06:21 thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 06:21 thinkpad_acpi: ACPI backlight control delay disabled 06:21 thinkpad_acpi: radio switch found; radios are enabled 06:21 r592: driver successfully loaded 06:21 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k 06:21 e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 06:21 random: crng init done 06:21 ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247) 06:21 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 06:21 ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247) 06:21 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 06:21 thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked 06:21 lpc_ich: Resource conflict(s) found affecting gpio_ich 06:21 thinkpad_acpi: Standard ACPI backlight interface not available, thinkpad_acpi native brightness control enabled 06:21 input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 06:21 e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 06:21 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds 06:21 iwl3945: Copyright(c) 2003-2011 Intel Corporation 06:21 iwl3945: hw_scan is disabled 06:21 iwl3945 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control 06:22 iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels 06:22 iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG 06:22 ppdev: user-space parallel port driver 06:22 iTCO_vendor_support: vendor-support=0 06:22 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 06:22 iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) 06:22 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 06:22 intel_powerclamp: No package C-state available 06:22 e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:14:4a:e2 06:22 e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection 06:22 e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF 06:22 i801_smbus 0000:00:1f.3: SMBus using PCI interrupt 06:22 snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac 06:22 snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker 06:22 snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 06:22 snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) 06:22 snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 06:22 snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0 06:22 snd_hda_codec_analog hdaudioC0D0: inputs: 06:22 snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15 06:22 snd_hda_codec_analog hdaudioC0D0: Mic=0x14 06:22 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered 06:22 snd_hda_codec_analog hdaudioC0D0: Dock Mic=0x1c 06:22 EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered,user_xattr 06:22 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 06:22 input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 06:22 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 06:24 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 06:24 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 06:24 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:24 iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 06:24 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:24 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:24 ip6_tables: (C) 2000-2006 Netfilter Core Team 06:24 Ebtables v2.0 registered 06:25 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:25 bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 06:25 tun: Universal TUN/TAP device driver, 1.6 06:25 virbr0: port 1(virbr0-nic) entered blocking state 06:25 virbr0: port 1(virbr0-nic) entered disabled state 06:25 device virbr0-nic entered promiscuous mode 06:25 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 06:25 virbr0: port 1(virbr0-nic) entered blocking state 06:25 virbr0: port 1(virbr0-nic) entered listening state 06:25 virbr0: port 1(virbr0-nic) entered disabled state 06:28 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:32 wlan0: associated 06:32 IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 06:32 NFSD: starting 90-second grace period (net ffffffff8afe0240) 06:42 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) 06:48 usb 2-2: USB disconnect, device number 2 06:55 usb 2-2: new high-speed USB device number 3 using ehci-pci 06:55 usb 5-2: new full-speed USB device number 2 using uhci_hcd 06:56 usb 5-2: not running at top speed; connect to a high speed hub 06:56 usb 5-2: New USB device found, idVendor=1058, idProduct=10a8 06:56 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 06:56 usb 5-2: Product: Elements 10A8 06:56 usb 5-2: Manufacturer: Western Digital 06:56 usb 5-2: SerialNumber: 5758333145373354504C3031 06:56 usb-storage 5-2:1.0: USB Mass Storage device detected 06:56 scsi host5: usb-storage 5-2:1.0 06:57 scsi 5:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 06:57 sd 5:0:0:0: Attached scsi generic sg2 type 0 06:57 sd 5:0:0:0: [sdb] Spinning up disk... 06:59 . 07:00 . 07:01 . 07:01 . 07:01 ready 07:01 sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 07:01 sd 5:0:0:0: [sdb] Write Protect is off 07:01 sd 5:0:0:0: [sdb] No Caching mode page found 07:01 sd 5:0:0:0: [sdb] Assuming drive cache: write through 07:01 sdb: sdb1 sdb2 07:01 sd 5:0:0:0: [sdb] Attached SCSI disk 07:08 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) 07:27 nfsd: last server has exited, flushing export cache