lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 25 Jul 2017 18:15:44 +0200
From:   Egil Hjelmeland <privat@...l-hjelmeland.no>
To:     corbet@....net, andrew@...n.ch,
        vivien.didelot@...oirfairelinux.com, f.fainelli@...il.com,
        davem@...emloft.net, kernel@...gutronix.de,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org
Cc:     Egil Hjelmeland <privat@...l-hjelmeland.no>
Subject: [PATCH net-next v2 01/10] net: dsa: lan9303: Fixed MDIO interface

Fixes after testing on actual HW:

- lan9303_mdio_write()/_read() must multiply register number
  by 4 to get offset

- Indirect access (PMI) to phy register only work in I2C mode. In
  MDIO mode phy registers must be accessed directly. Introduced
  struct lan9303_phy_ops to handle the two modes. Renamed functions
  to clarify.

- lan9303_detect_phy_setup() : Failed MDIO read return 0xffff.
  Handle that.

Signed-off-by: Egil Hjelmeland <privat@...l-hjelmeland.no>
---
 drivers/net/dsa/lan9303-core.c | 42 +++++++++++++++++++++++++++---------------
 drivers/net/dsa/lan9303.h      | 11 +++++++++++
 drivers/net/dsa/lan9303_i2c.c  |  2 ++
 drivers/net/dsa/lan9303_mdio.c | 34 ++++++++++++++++++++++++++++++++++
 4 files changed, 74 insertions(+), 15 deletions(-)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index cd76e61f1fca..e622db586c3d 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -20,6 +20,9 @@
 
 #include "lan9303.h"
 
+/* 13.2 System Control and Status Registers
+ * Multiply register number by 4 to get address offset.
+ */
 #define LAN9303_CHIP_REV 0x14
 # define LAN9303_CHIP_ID 0x9303
 #define LAN9303_IRQ_CFG 0x15
@@ -53,6 +56,9 @@
 #define LAN9303_VIRT_PHY_BASE 0x70
 #define LAN9303_VIRT_SPECIAL_CTRL 0x77
 
+/*13.4 Switch Fabric Control and Status Registers
+ * Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA.
+ */
 #define LAN9303_SW_DEV_ID 0x0000
 #define LAN9303_SW_RESET 0x0001
 #define LAN9303_SW_RESET_RESET BIT(0)
@@ -242,7 +248,7 @@ static int lan9303_virt_phy_reg_write(struct lan9303 *chip, int regnum, u16 val)
 	return regmap_write(chip->regmap, LAN9303_VIRT_PHY_BASE + regnum, val);
 }
 
-static int lan9303_port_phy_reg_wait_for_completion(struct lan9303 *chip)
+static int lan9303_indirect_phy_wait_for_completion(struct lan9303 *chip)
 {
 	int ret, i;
 	u32 reg;
@@ -262,7 +268,7 @@ static int lan9303_port_phy_reg_wait_for_completion(struct lan9303 *chip)
 	return -EIO;
 }
 
-static int lan9303_port_phy_reg_read(struct lan9303 *chip, int addr, int regnum)
+static int lan9303_indirect_phy_read(struct lan9303 *chip, int addr, int regnum)
 {
 	int ret;
 	u32 val;
@@ -272,7 +278,7 @@ static int lan9303_port_phy_reg_read(struct lan9303 *chip, int addr, int regnum)
 
 	mutex_lock(&chip->indirect_mutex);
 
-	ret = lan9303_port_phy_reg_wait_for_completion(chip);
+	ret = lan9303_indirect_phy_wait_for_completion(chip);
 	if (ret)
 		goto on_error;
 
@@ -281,7 +287,7 @@ static int lan9303_port_phy_reg_read(struct lan9303 *chip, int addr, int regnum)
 	if (ret)
 		goto on_error;
 
-	ret = lan9303_port_phy_reg_wait_for_completion(chip);
+	ret = lan9303_indirect_phy_wait_for_completion(chip);
 	if (ret)
 		goto on_error;
 
@@ -299,8 +305,8 @@ static int lan9303_port_phy_reg_read(struct lan9303 *chip, int addr, int regnum)
 	return ret;
 }
 
-static int lan9303_phy_reg_write(struct lan9303 *chip, int addr, int regnum,
-				 unsigned int val)
+static int lan9303_indirect_phy_write(struct lan9303 *chip, int addr,
+				      int regnum, u16 val)
 {
 	int ret;
 	u32 reg;
@@ -311,7 +317,7 @@ static int lan9303_phy_reg_write(struct lan9303 *chip, int addr, int regnum,
 
 	mutex_lock(&chip->indirect_mutex);
 
-	ret = lan9303_port_phy_reg_wait_for_completion(chip);
+	ret = lan9303_indirect_phy_wait_for_completion(chip);
 	if (ret)
 		goto on_error;
 
@@ -328,6 +334,11 @@ static int lan9303_phy_reg_write(struct lan9303 *chip, int addr, int regnum,
 	return ret;
 }
 
+const struct lan9303_phy_ops lan9303_indirect_phy_ops = {
+	.phy_read = lan9303_indirect_phy_read,
+	.phy_write = lan9303_indirect_phy_write,
+};
+
 static int lan9303_switch_wait_for_completion(struct lan9303 *chip)
 {
 	int ret, i;
@@ -427,14 +438,15 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip)
 	 * Special reg 18 of phy 3 reads as 0x0000, if 'phy_addr_sel_strap' is 0
 	 * and the IDs are 0-1-2, else it contains something different from
 	 * 0x0000, which means 'phy_addr_sel_strap' is 1 and the IDs are 1-2-3.
+	 * 0xffff is returned for failed MDIO access.
 	 */
-	reg = lan9303_port_phy_reg_read(chip, 3, MII_LAN911X_SPECIAL_MODES);
+	reg = chip->ops->phy_read(chip, 3, MII_LAN911X_SPECIAL_MODES);
 	if (reg < 0) {
 		dev_err(chip->dev, "Failed to detect phy config: %d\n", reg);
 		return reg;
 	}
 
-	if (reg != 0)
+	if ((reg != 0) && (reg != 0xffff))
 		chip->phy_addr_sel_strap = 1;
 	else
 		chip->phy_addr_sel_strap = 0;
@@ -719,7 +731,7 @@ static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
 	if (phy > phy_base + 2)
 		return -ENODEV;
 
-	return lan9303_port_phy_reg_read(chip, phy, regnum);
+	return chip->ops->phy_read(chip, phy, regnum);
 }
 
 static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
@@ -733,7 +745,7 @@ static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
 	if (phy > phy_base + 2)
 		return -ENODEV;
 
-	return lan9303_phy_reg_write(chip, phy, regnum, val);
+	return chip->ops->phy_write(chip, phy, regnum, val);
 }
 
 static int lan9303_port_enable(struct dsa_switch *ds, int port,
@@ -766,13 +778,13 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port,
 	switch (port) {
 	case 1:
 		lan9303_disable_packet_processing(chip, LAN9303_PORT_1_OFFSET);
-		lan9303_phy_reg_write(chip, chip->phy_addr_sel_strap + 1,
-				      MII_BMCR, BMCR_PDOWN);
+		lan9303_phy_write(ds, chip->phy_addr_sel_strap + 1,
+				  MII_BMCR, BMCR_PDOWN);
 		break;
 	case 2:
 		lan9303_disable_packet_processing(chip, LAN9303_PORT_2_OFFSET);
-		lan9303_phy_reg_write(chip, chip->phy_addr_sel_strap + 2,
-				      MII_BMCR, BMCR_PDOWN);
+		lan9303_phy_write(ds, chip->phy_addr_sel_strap + 2,
+				  MII_BMCR, BMCR_PDOWN);
 		break;
 	default:
 		dev_dbg(chip->dev,
diff --git a/drivers/net/dsa/lan9303.h b/drivers/net/dsa/lan9303.h
index d1512dad2d90..444d00b460e1 100644
--- a/drivers/net/dsa/lan9303.h
+++ b/drivers/net/dsa/lan9303.h
@@ -2,6 +2,15 @@
 #include <linux/device.h>
 #include <net/dsa.h>
 
+struct lan9303;
+
+struct lan9303_phy_ops {
+	/* PHY 1 &2 access*/
+	int	(*phy_read)(struct lan9303 *chip, int port, int regnum);
+	int	(*phy_write)(struct lan9303 *chip, int port,
+			     int regnum, u16 val);
+};
+
 struct lan9303 {
 	struct device *dev;
 	struct regmap *regmap;
@@ -11,9 +20,11 @@ struct lan9303 {
 	bool phy_addr_sel_strap;
 	struct dsa_switch *ds;
 	struct mutex indirect_mutex; /* protect indexed register access */
+	const struct lan9303_phy_ops *ops;
 };
 
 extern const struct regmap_access_table lan9303_register_set;
+extern const struct lan9303_phy_ops lan9303_indirect_phy_ops;
 
 int lan9303_probe(struct lan9303 *chip, struct device_node *np);
 int lan9303_remove(struct lan9303 *chip);
diff --git a/drivers/net/dsa/lan9303_i2c.c b/drivers/net/dsa/lan9303_i2c.c
index ab3ce0da5071..24ec20f7f444 100644
--- a/drivers/net/dsa/lan9303_i2c.c
+++ b/drivers/net/dsa/lan9303_i2c.c
@@ -63,6 +63,8 @@ static int lan9303_i2c_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, sw_dev);
 	sw_dev->chip.dev = &client->dev;
 
+	sw_dev->chip.ops = &lan9303_indirect_phy_ops;
+
 	ret = lan9303_probe(&sw_dev->chip, client->dev.of_node);
 	if (ret != 0)
 		return ret;
diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c
index 93c36c0541cf..94df12c5362f 100644
--- a/drivers/net/dsa/lan9303_mdio.c
+++ b/drivers/net/dsa/lan9303_mdio.c
@@ -39,6 +39,7 @@ static void lan9303_mdio_real_write(struct mdio_device *mdio, int reg, u16 val)
 static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val)
 {
 	struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
+	reg <<= 2; /* reg num to offset */
 
 	mutex_lock(&sw_dev->device->bus->mdio_lock);
 	lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff);
@@ -56,6 +57,7 @@ static u16 lan9303_mdio_real_read(struct mdio_device *mdio, int reg)
 static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val)
 {
 	struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
+	reg <<= 2; /* reg num to offset */
 
 	mutex_lock(&sw_dev->device->bus->mdio_lock);
 	*val = lan9303_mdio_real_read(sw_dev->device, reg);
@@ -65,6 +67,36 @@ static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val)
 	return 0;
 }
 
+int lan9303_mdio_phy_write(struct lan9303 *chip, int phy, int regnum, u16 val)
+{
+	struct lan9303_mdio *sw_dev = dev_get_drvdata(chip->dev);
+	struct mdio_device *mdio = sw_dev->device;
+
+	mutex_lock(&mdio->bus->mdio_lock);
+	mdio->bus->write(mdio->bus, phy, regnum, val);
+	mutex_unlock(&mdio->bus->mdio_lock);
+
+	return 0;
+}
+
+int lan9303_mdio_phy_read(struct lan9303 *chip, int phy,  int reg)
+{
+	struct lan9303_mdio *sw_dev = dev_get_drvdata(chip->dev);
+	struct mdio_device *mdio = sw_dev->device;
+	int val;
+
+	mutex_lock(&mdio->bus->mdio_lock);
+	val  =  mdio->bus->read(mdio->bus, phy, reg);
+	mutex_unlock(&mdio->bus->mdio_lock);
+
+	return val;
+}
+
+static const struct lan9303_phy_ops lan9303_mdio_phy_ops = {
+	.phy_read = lan9303_mdio_phy_read,
+	.phy_write = lan9303_mdio_phy_write,
+};
+
 static const struct regmap_config lan9303_mdio_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 32,
@@ -106,6 +138,8 @@ static int lan9303_mdio_probe(struct mdio_device *mdiodev)
 	dev_set_drvdata(&mdiodev->dev, sw_dev);
 	sw_dev->chip.dev = &mdiodev->dev;
 
+	sw_dev->chip.ops = &lan9303_mdio_phy_ops;
+
 	ret = lan9303_probe(&sw_dev->chip, mdiodev->dev.of_node);
 	if (ret != 0)
 		return ret;
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ