linux-kernel - [PATCH 1/2] pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1501137036-20155-1-git-send-email-vivek.gautam@codeaurora.org>
Date:   Thu, 27 Jul 2017 12:00:35 +0530
From:   Vivek Gautam <vivek.gautam@...eaurora.org>
To:     bjorn.andersson@...aro.org, linus.walleij@...aro.org,
        robh+dt@...nel.org, andy.gross@...aro.org,
        linux-arm-msm@...r.kernel.org
Cc:     rnayak@...eaurora.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Vivek Gautam <vivek.gautam@...eaurora.org>
Subject: [PATCH 1/2] pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support

Update the bindings doc and driver for pmi8994-gpio devices.

Signed-off-by: Vivek Gautam <vivek.gautam@...eaurora.org>
---

- Have been using this patch-set on db820c [1] for extcon with
  usb controller. The usb controller uses one of these gpios
  for usb-id/vbus detection.

[1] https://github.com/boddob/linux/tree/for-qcomlt/4.13rc2-merged

 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c                     | 1 +
 2 files changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 8d893a874634..74932318d41d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -15,6 +15,7 @@ PMIC's from Qualcomm.
 		    "qcom,pm8921-gpio"
 		    "qcom,pm8941-gpio"
 		    "qcom,pm8994-gpio"
+		    "qcom,pmi8994-gpio"
 		    "qcom,pma8084-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
@@ -84,6 +85,7 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio44 for pm8921
 		    gpio1-gpio36 for pm8941
 		    gpio1-gpio22 for pm8994
+		    gpio1-gpio10 for pmi8994
 		    gpio1-gpio22 for pma8084
 
 - function:
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 664b641fd776..bf0a6438424b 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -799,6 +799,7 @@ static int pmic_gpio_remove(struct platform_device *pdev)
 	{ .compatible = "qcom,pm8916-gpio" },	/* 4 GPIO's */
 	{ .compatible = "qcom,pm8941-gpio" },	/* 36 GPIO's */
 	{ .compatible = "qcom,pm8994-gpio" },	/* 22 GPIO's */
+	{ .compatible = "qcom,pmi8994-gpio" },	/* 10 GPIO's */
 	{ .compatible = "qcom,pma8084-gpio" },	/* 22 GPIO's */
 	{ .compatible = "qcom,spmi-gpio" }, /* Generic */
 	{ },
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project