[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <1501127474-40895-3-git-send-email-yong.deng@magewell.com>
Date: Thu, 27 Jul 2017 11:51:13 +0800
From: Yong Deng <yong.deng@...ewell.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"David S. Miller" <davem@...emloft.net>,
Hans Verkuil <hverkuil@...all.nl>,
Arnd Bergmann <arnd@...db.de>,
Hugues Fruchet <hugues.fruchet@...com>,
Yannick Fertre <yannick.fertre@...com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Benoit Parrot <bparrot@...com>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Jean-Christophe Trotin <jean-christophe.trotin@...com>,
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@...renesas.com>,
Minghsiu Tsai <minghsiu.tsai@...iatek.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com
Cc: Yong Deng <yong.deng@...ewell.com>
Subject: [PATCH v2 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI)
Add binding documentation for Allwinner V3s CSI.
Signed-off-by: Yong Deng <yong.deng@...ewell.com>
---
.../devicetree/bindings/media/sun6i-csi.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
new file mode 100644
index 0000000..f8d83f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -0,0 +1,49 @@
+Allwinner V3s Camera Sensor Interface
+------------------------------
+
+Required properties:
+ - compatible: value must be "allwinner,sun8i-v3s-csi"
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the CSI
+ * ahb: the CSI interface clock
+ * mod: the CSI module clock
+ * ram: the CSI DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset line driving the CSI
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ csi1: csi@...b4000 {
+ compatible = "allwinner,sun8i-v3s-csi";
+ reg = <0x01cb4000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI1_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ csi1_ep: endpoint {
+ remote-endpoint = <&adv7611_ep>;
+ bus-width = <16>;
+ data-shift = <0>;
+
+ /* If hsync-active/vsync-active are missing,
+ embedded BT.656 sync is used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+
--
1.8.3.1
Powered by blists - more mailing lists