lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 28 Jul 2017 18:48:12 +0530
From:   Vivek Gautam <vivek.gautam@...eaurora.org>
To:     bjorn.andersson@...aro.org, linus.walleij@...aro.org,
        robh+dt@...nel.org, andy.gross@...aro.org,
        linux-arm-msm@...r.kernel.org
Cc:     sboyd@...eaurora.org, rnayak@...eaurora.org,
        linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Vivek Gautam <vivek.gautam@...eaurora.org>
Subject: [PATCH v2 1/2] Documentation: dt: pinctrl: Add pmi8994 gpio support

Update the binding doc for qcom pmi8994-gpio devices.

Signed-off-by: Vivek Gautam <vivek.gautam@...eaurora.org>
---

- Have been testing this patch-set on db820c for extcon with
  usb controller. The usb controller uses one of these gpios
  for usb-id/vbus detection.

Changes since v1:
 - Dropped "qcom,pmi8994-gpio" compatible addition to the driver
   since we can use the generic "qcom,spmi-gpio" compatible.
 - Sorted to add pmi8994-gpio in alphabatical order.

 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 8d893a874634..d6f8adbf25c6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -16,6 +16,7 @@ PMIC's from Qualcomm.
 		    "qcom,pm8941-gpio"
 		    "qcom,pm8994-gpio"
 		    "qcom,pma8084-gpio"
+		    "qcom,pmi8994-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -85,6 +86,7 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio36 for pm8941
 		    gpio1-gpio22 for pm8994
 		    gpio1-gpio22 for pma8084
+		    gpio1-gpio10 for pmi8994
 
 - function:
 	Usage: required
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ