[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170728151157.28983-3-privat@egil-hjelmeland.no>
Date: Fri, 28 Jul 2017 17:11:55 +0200
From: Egil Hjelmeland <privat@...l-hjelmeland.no>
To: andrew@...n.ch, vivien.didelot@...oirfairelinux.com,
f.fainelli@...il.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...gutronix.de
Cc: Egil Hjelmeland <privat@...l-hjelmeland.no>
Subject: [PATCH net-next 2/4] net: dsa: lan9303: Multiply by 4 to get MDIO register
lan9303_mdio_write()/_read() must multiply register number by 4 to get
offset.
Added some commments to the register definitions.
Signed-off-by: Egil Hjelmeland <privat@...l-hjelmeland.no>
---
drivers/net/dsa/lan9303-core.c | 6 ++++++
drivers/net/dsa/lan9303_mdio.c | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 9d0ab77edb4a..96ebeb9bd59a 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -20,6 +20,9 @@
#include "lan9303.h"
+/* 13.2 System Control and Status Registers
+ * Multiply register number by 4 to get address offset.
+ */
#define LAN9303_CHIP_REV 0x14
# define LAN9303_CHIP_ID 0x9303
#define LAN9303_IRQ_CFG 0x15
@@ -53,6 +56,9 @@
#define LAN9303_VIRT_PHY_BASE 0x70
#define LAN9303_VIRT_SPECIAL_CTRL 0x77
+/*13.4 Switch Fabric Control and Status Registers
+ * Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA.
+ */
#define LAN9303_SW_DEV_ID 0x0000
#define LAN9303_SW_RESET 0x0001
#define LAN9303_SW_RESET_RESET BIT(0)
diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c
index 93c36c0541cf..2db7970fc88c 100644
--- a/drivers/net/dsa/lan9303_mdio.c
+++ b/drivers/net/dsa/lan9303_mdio.c
@@ -40,6 +40,7 @@ static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val)
{
struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
+ reg <<= 2; /* reg num to offset */
mutex_lock(&sw_dev->device->bus->mdio_lock);
lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff);
lan9303_mdio_real_write(sw_dev->device, reg + 2, (val >> 16) & 0xffff);
@@ -57,6 +58,7 @@ static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val)
{
struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
+ reg <<= 2; /* reg num to offset */
mutex_lock(&sw_dev->device->bus->mdio_lock);
*val = lan9303_mdio_real_read(sw_dev->device, reg);
*val |= (lan9303_mdio_real_read(sw_dev->device, reg + 2) << 16);
--
2.11.0
Powered by blists - more mailing lists