| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1501303349-30007-6-git-send-email-abhishek.shah@broadcom.com>
Date: Sat, 29 Jul 2017 10:12:27 +0530
From: Abhishek Shah <abhishek.shah@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Ray Jui <ray.jui@...adcom.com>,
Scott Branden <scott.branden@...adcom.com>,
Jon Mason <jon.mason@...adcom.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH 5/7] arm64: dts: Add SATA DT nodes for Stingray SoC
From: Srinath Mannam <srinath.mannam@...adcom.com>
Add DT nodes for SATA host controllers and SATA PHYs
on Stingray SoC
Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 64 +++++
.../boot/dts/broadcom/stingray/stingray-sata.dtsi | 278 +++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 2 +
3 files changed, 344 insertions(+)
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index cacc25e..8862ec9 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -72,6 +72,70 @@
<0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
};
+&sata0 {
+ status = "okay";
+};
+
+&sata_phy0{
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata_phy1{
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata_phy2{
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
+&sata_phy3{
+ status = "okay";
+};
+
+&sata4 {
+ status = "okay";
+};
+
+&sata_phy4{
+ status = "okay";
+};
+
+&sata5 {
+ status = "okay";
+};
+
+&sata_phy5{
+ status = "okay";
+};
+
+&sata6 {
+ status = "okay";
+};
+
+&sata_phy6{
+ status = "okay";
+};
+
+&sata7 {
+ status = "okay";
+};
+
+&sata_phy7{
+ status = "okay";
+};
+
&mdio_mux_iproc {
mdio@10 {
gphy0: eth-phy@10 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
new file mode 100644
index 0000000..a774709
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -0,0 +1,278 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ sata {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x67d00000 0x00800000>;
+
+ sata0: ahci@...10000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00210000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata0_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy0: sata_phy@...12100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00212100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata1: ahci@...10000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00310000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata1_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata1_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy1: sata_phy@...12100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00312100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata1_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata2: ahci@...20000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00120000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata2_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata2_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy2: sata_phy@...22100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00122100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata2_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata3: ahci@...30000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00130000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata3_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata3_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy3: sata_phy@...32100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00132100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata3_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata4: ahci@...30000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00330000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata4_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata4_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy4: sata_phy@...32100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00332100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata4_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata5: ahci@...00000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00400000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata5_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata5_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy5: sata_phy@...02100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00402100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata5_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata6: ahci@...10000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00410000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata6_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata6_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy6: sata_phy@...12100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00412100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata6_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata7: ahci@...20000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00420000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata7_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata7_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy7: sata_phy@...22100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00422100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata7_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 1c6cc2d..1700033 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -267,6 +267,8 @@
};
};
+ #include "stingray-sata.dtsi"
+
hsls {
compatible = "simple-bus";
#address-cells = <1>;
--
2.7.4
Powered by blists - more mailing lists