[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1501483484-2207-1-git-send-email-vivek.gautam@codeaurora.org>
Date: Mon, 31 Jul 2017 12:14:40 +0530
From: Vivek Gautam <vivek.gautam@...eaurora.org>
To: andy.gross@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org
Cc: bjorn.andersson@...aro.org, robh+dt@...nel.org,
mark.rutland@....com, sboyd@...eaurora.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Vivek Gautam <vivek.gautam@...eaurora.org>
Subject: [PATCH 0/4] arm64: dt: msm8996: Enable support for qmp and qusb2 phy, and USB
Adding patches to enable qusb2 and qmp phy controller for PCIe and USB,
and to enable USB 2.0 and 3.0 support on msm8996 chipset.
Enabling the support for apq8096-db820c board.
Patch series dependencies:
1) Glink-rpm device tree support for 8996:
https://www.spinics.net/lists/linux-arm-msm/msg29046.html
2) Dt binding fix for pipe clock source:
a. https://patchwork.kernel.org/patch/9870865/
b. https://patchwork.kernel.org/patch/9870871/
3) pmi8994 gpio support:
https://lkml.org/lkml/2017/7/28/346
Tested the series on dragonboard db820c target.
Vivek Gautam (4):
arm64: dts: msm8996: Add device node for qcom qusb2 phy
arm64: dts: msm8996: Add device node for qcom qmp-phy for usb
arm64: dts: msm8996: Add device node for qcom qmp-phy for pcie
arm64: dts: msm8996: Add device node for qcom,dwc3
.../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 24 +++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 50 +++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 203 +++++++++++++++++++++
3 files changed, 277 insertions(+)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists