| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7e68a8ed-af45-e288-3461-f80ffaa542ae@suse.cz>
Date: Mon, 31 Jul 2017 10:02:20 +0200
From: Vlastimil Babka <vbabka@...e.cz>
To: Dima Zavin <dmitriyz@...mo.com>
Cc: Peter Zijlstra <peterz@...radead.org>,
Christopher Lameter <cl@...ux.com>,
Li Zefan <lizefan@...wei.com>,
Pekka Enberg <penberg@...nel.org>,
David Rientjes <rientjes@...gle.com>,
Joonsoo Kim <iamjoonsoo.kim@....com>,
Andrew Morton <akpm@...ux-foundation.org>,
cgroups@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mm@...ck.org, Mel Gorman <mgorman@...hsingularity.net>,
Cliff Spradlin <cspradlin@...mo.com>
Subject: Re: [PATCH v3] cpuset: fix a deadlock due to incomplete patching of
cpusets_enabled()
On 07/31/2017 06:01 AM, Dima Zavin wrote:
> In codepaths that use the begin/retry interface for reading
> mems_allowed_seq with irqs disabled, there exists a race condition that
> stalls the patch process after only modifying a subset of the
> static_branch call sites.
>
> This problem manifested itself as a dead lock in the slub
> allocator, inside get_any_partial. The loop reads
> mems_allowed_seq value (via read_mems_allowed_begin),
> performs the defrag operation, and then verifies the consistency
> of mem_allowed via the read_mems_allowed_retry and the cookie
> returned by xxx_begin. The issue here is that both begin and retry
> first check if cpusets are enabled via cpusets_enabled() static branch.
> This branch can be rewritted dynamically (via cpuset_inc) if a new
> cpuset is created. The x86 jump label code fully synchronizes across
> all CPUs for every entry it rewrites. If it rewrites only one of the
> callsites (specifically the one in read_mems_allowed_retry) and then
> waits for the smp_call_function(do_sync_core) to complete while a CPU is
> inside the begin/retry section with IRQs off and the mems_allowed value
> is changed, we can hang. This is because begin() will always return 0
> (since it wasn't patched yet) while retry() will test the 0 against
> the actual value of the seq counter.
>
> The fix is to use two different static keys: one for begin
> (pre_enable_key) and one for retry (enable_key). In cpuset_inc(), we
> first bump the pre_enable key to ensure that cpuset_mems_allowed_begin()
> always return a valid seqcount if are enabling cpusets. Similarly,
> when disabling cpusets via cpuset_dec(), we first ensure that callers
> of cpuset_mems_allowed_retry() will start ignoring the seqcount
> value before we let cpuset_mems_allowed_begin() return 0.
>
> The relevant stack traces of the two stuck threads:
>
> CPU: 1 PID: 1415 Comm: mkdir Tainted: G L 4.9.36-00104-g540c51286237 #4
> Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
> task: ffff8817f9c28000 task.stack: ffffc9000ffa4000
> RIP: smp_call_function_many+0x1f9/0x260
> Call Trace:
> ? setup_data_read+0xa0/0xa0
> ? ___slab_alloc+0x28b/0x5a0
> smp_call_function+0x3b/0x70
> ? setup_data_read+0xa0/0xa0
> on_each_cpu+0x2f/0x90
> ? ___slab_alloc+0x28a/0x5a0
> ? ___slab_alloc+0x28b/0x5a0
> text_poke_bp+0x87/0xd0
> ? ___slab_alloc+0x28a/0x5a0
> arch_jump_label_transform+0x93/0x100
> __jump_label_update+0x77/0x90
> jump_label_update+0xaa/0xc0
> static_key_slow_inc+0x9e/0xb0
> cpuset_css_online+0x70/0x2e0
> online_css+0x2c/0xa0
> cgroup_apply_control_enable+0x27f/0x3d0
> cgroup_mkdir+0x2b7/0x420
> kernfs_iop_mkdir+0x5a/0x80
> vfs_mkdir+0xf6/0x1a0
> SyS_mkdir+0xb7/0xe0
> entry_SYSCALL_64_fastpath+0x18/0xad
>
> ...
>
> CPU: 2 PID: 1 Comm: init Tainted: G L 4.9.36-00104-g540c51286237 #4
> Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
> task: ffff8818087c0000 task.stack: ffffc90000030000
> RIP: int3+0x39/0x70
> Call Trace:
> <#DB> ? ___slab_alloc+0x28b/0x5a0
> <EOE> ? copy_process.part.40+0xf7/0x1de0
> ? __slab_alloc.isra.80+0x54/0x90
> ? copy_process.part.40+0xf7/0x1de0
> ? copy_process.part.40+0xf7/0x1de0
> ? kmem_cache_alloc_node+0x8a/0x280
> ? copy_process.part.40+0xf7/0x1de0
> ? _do_fork+0xe7/0x6c0
> ? _raw_spin_unlock_irq+0x2d/0x60
> ? trace_hardirqs_on_caller+0x136/0x1d0
> ? entry_SYSCALL_64_fastpath+0x5/0xad
> ? do_syscall_64+0x27/0x350
> ? SyS_clone+0x19/0x20
> ? do_syscall_64+0x60/0x350
> ? entry_SYSCALL64_slow_path+0x25/0x25
>
> Reported-by: Cliff Spradlin <cspradlin@...mo.com>
> Signed-off-by: Dima Zavin <dmitriyz@...mo.com>
Looks good. Could you verify it fixes the issue, or was it too hard to
reproduce? Also is this a stable candidate patch, and can you identify
an exact commit hash it fixes?
Acked-by: Vlastimil Babka <vbabka@...e.cz>
> ---
>
> v3:
> - Changed the implementation based on Peter Zijlstra's suggestion. Now
> using two keys for begin/retry instead of hacking the state into the
> cookie.
> - Rebased and tested on top of v4.13-rc3.
>
> v4:
> - Moved the cached cpusets_enabled() state into the cookie, turned
> the cookie into a struct and updated all the other call sites.
> - Applied on top of v4.12 since one of the callers in page_alloc.c changed.
> Still only tested on v4.9.36 and compile tested against v4.12.
>
> include/linux/cpuset.h | 19 +++++++++++++++++--
> kernel/cgroup/cpuset.c | 1 +
> 2 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
> index 119a3f9604b0..e5a684c04c70 100644
> --- a/include/linux/cpuset.h
> +++ b/include/linux/cpuset.h
> @@ -18,6 +18,19 @@
>
> #ifdef CONFIG_CPUSETS
>
> +/*
> + * Static branch rewrites can happen in an arbitrary order for a given
> + * key. In code paths where we need to loop with read_mems_allowed_begin() and
> + * read_mems_allowed_retry() to get a consistent view of mems_allowed, we need
> + * to ensure that begin() always gets rewritten before retry() in the
> + * disabled -> enabled transition. If not, then if local irqs are disabled
> + * around the loop, we can deadlock since retry() would always be
> + * comparing the latest value of the mems_allowed seqcount against 0 as
> + * begin() still would see cpusets_enabled() as false. The enabled -> disabled
> + * transition should happen in reverse order for the same reasons (want to stop
> + * looking at real value of mems_allowed.sequence in retry() first).
> + */
> +extern struct static_key_false cpusets_pre_enable_key;
> extern struct static_key_false cpusets_enabled_key;
> static inline bool cpusets_enabled(void)
> {
> @@ -32,12 +45,14 @@ static inline int nr_cpusets(void)
>
> static inline void cpuset_inc(void)
> {
> + static_branch_inc(&cpusets_pre_enable_key);
> static_branch_inc(&cpusets_enabled_key);
> }
>
> static inline void cpuset_dec(void)
> {
> static_branch_dec(&cpusets_enabled_key);
> + static_branch_dec(&cpusets_pre_enable_key);
> }
>
> extern int cpuset_init(void);
> @@ -115,7 +130,7 @@ extern void cpuset_print_current_mems_allowed(void);
> */
> static inline unsigned int read_mems_allowed_begin(void)
> {
> - if (!cpusets_enabled())
> + if (!static_branch_unlikely(&cpusets_pre_enable_key))
> return 0;
>
> return read_seqcount_begin(¤t->mems_allowed_seq);
> @@ -129,7 +144,7 @@ static inline unsigned int read_mems_allowed_begin(void)
> */
> static inline bool read_mems_allowed_retry(unsigned int seq)
> {
> - if (!cpusets_enabled())
> + if (!static_branch_unlikely(&cpusets_enabled_key))
> return false;
>
> return read_seqcount_retry(¤t->mems_allowed_seq, seq);
> diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
> index ca8376e5008c..8d5151688504 100644
> --- a/kernel/cgroup/cpuset.c
> +++ b/kernel/cgroup/cpuset.c
> @@ -63,6 +63,7 @@
> #include <linux/cgroup.h>
> #include <linux/wait.h>
>
> +DEFINE_STATIC_KEY_FALSE(cpusets_pre_enable_key);
> DEFINE_STATIC_KEY_FALSE(cpusets_enabled_key);
>
> /* See "Frequency meter" comments, below. */
>
Powered by blists - more mailing lists