| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.LNX.2.21.1707310643280.18669@localhost.localdomain>
Date: Mon, 31 Jul 2017 06:49:19 +0200 (CEST)
From: Enrico Mioso <mrkiko.rs@...il.com>
To: linux-kernel@...r.kernel.org
Subject: EXT4-fs (sdc1): Delayed block allocation failed ...
Hello. I am getting a single error message, similar to what happens in
https://patchwork.kernel.org/patch/9460075/
EXT4-fs (sdc1): Delayed block allocation failed for inode 27155438 at logical offset 6561 with max blocks 6 with error 121
EXT4-fs (sdc1): This should not happen!! Data will be lost
The /dev/sdc device in question is a Samsung Portable Disk, my complete
lsusb for this device follows.
Currently running kernel is 4.12.3-1-ARCH, 32-bit machine.
Thanks very much to all guys,
Enrico
-------lsusb-------
Bus 001 Device 008: ID 04e8:61b3 Samsung Electronics Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04e8 Samsung Electronics Co., Ltd
idProduct 0x61b3
bcdDevice 13.06
iManufacturer 1 Samsung M3 Portable
iProduct 2 Samsung M3 Portable
iSerial 3 C0747E011D000068
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 85
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 30mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000f0e
BESL Link Power Management (LPM) Supported
BESL value 3840 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x0001
Self Powered
-------dmesg-------
Linux version 4.12.3-1-ARCH (builduser@...awn-6512) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Sat Jul 22 16:02:07 UTC 2017
Disabled fast string operations
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003f77ffff] usable
BIOS-e820: [mem 0x000000003f780000-0x000000003f78ffff] ACPI data
BIOS-e820: [mem 0x000000003f790000-0x000000003f7cffff] ACPI NVS
BIOS-e820: [mem 0x000000003f7d0000-0x000000003f7ddfff] reserved
BIOS-e820: [mem 0x000000003f7e0000-0x000000003f7fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
SMBIOS 2.5 present.
DMI: ASUSTeK Computer INC. 701/701, BIOS 1001 05/04/2008
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f780 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03F800000 mask FFF800000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: PAT not supported by CPU.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x0abfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
BRK [0x0a98a000, 0x0a98afff] PGTABLE
RAMDISK: [mem 0x3f306000-0x3f77ffff]
Allocated new RAMDISK: [mem 0x37384000-0x377fd54f]
Move RAMDISK from [mem 0x3f306000-0x3f77f54f] to [mem 0x37384000-0x377fd54f]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBE60 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000003F780000 000034 (v01 A M I OEMRSDT 05000804 MSFT 00000097)
ACPI: FACP 0x000000003F780200 000081 (v01 A M I OEMFACP 05000804 MSFT 00000097)
ACPI: DSDT 0x000000003F780400 005F61 (v01 A0797 A0797000 00000000 INTL 20051117)
ACPI: FACS 0x000000003F790000 000040
ACPI: APIC 0x000000003F780390 000068 (v01 A M I OEMAPIC 05000804 MSFT 00000097)
ACPI: OEMB 0x000000003F790040 000046 (v01 A M I AMI_OEM 05000804 MSFT 00000097)
ACPI: MCFG 0x000000003F786370 00003C (v01 A M I OEMMCFG 05000804 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
127MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
BRK [0x0a98b000, 0x0a98bfff] PGTABLE
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x00000000377fdfff]
HighMem [mem 0x00000000377fe000-0x000000003f77ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000003f77ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000003f77ffff]
On node 0 totalpages: 259870
free_area_init_node: node 0, pgdat ca7bd8c0, node_mem_map f6998028
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 2180 pages used for memmap
Normal zone: 223230 pages, LIFO batch:31
HighMem zone: 32642 pages, LIFO batch:7
Using APIC driver default
Reserving Intel graphics memory at 0x3f800000-0x3fffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
percpu: Embedded 20 pages/cpu @f6981000 s50380 r0 d31540 u81920
pcpu-alloc: s50380 r0 d31540 u81920 alloc=20*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257650
Kernel command line: auto BOOT_IMAGE=archkernel ro root=801
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003f780)
Initializing Movable for node 0 (00000000:00000000)
Memory: 1013996K/1039480K available (5743K kernel code, 616K rwdata, 1672K rodata, 700K init, 776K bss, 25484K reserved, 0K cma-reserved, 130568K highmem)
virtual kernel memory layout:
fixmap : 0xfff0e000 - 0xfffff000 ( 964 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xca7e7000 - 0xca896000 ( 700 kB)
.data : 0xca59bcb7 - 0xca7da0c0 (2297 kB)
.text : 0xca000000 - 0xca59bcb7 (5743 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
ftrace: allocating 26261 entries in 52 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f646c000 soft=f646e000
Console: colour VGA+ 80x50
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 630.111 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1260.73 BogoMIPS (lpj=2100370)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Disabled fast string operations
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 1
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
APIC calibration not consistent with PM-Timer: 176ms instead of 100ms
APIC delta adjusted to PM-Timer: 437544 (772944)
smpboot: CPU0: Intel(R) Celeron(R) M processor 900MHz (family: 0x6, model: 0xd, stepping: 0x8)
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
smpboot: Total of 1 processors activated (1260.73 BogoMIPS)
sched_clock: Marking stable (113333322, 0)->(470460141, -357126819)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3f790000-0x3f7cffff] (262144 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:03:07, date: 07/30/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
HugeTLB registered 4 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x3f810000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7f00000-0xf7f7ffff]
pci 0000:00:02.0: reg 0x14: [io 0xec00-0xec07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xf7ec0000-0xf7efffff]
pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf7f80000-0xf7ffffff]
pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7eb8000-0xf7ebbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xe400-0xe41f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xe480-0xe49f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xe800-0xe81f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xe880-0xe89f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf7eb7c00-0xf7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:03:00.0: [1969:2048] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfbfa0000-0xfbfbffff pref]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xfbef0000-0xfbefffff 64bit]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 01-02]
pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x3f810000-0xffffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f780000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0a00 SYN0a01 SYN0a04 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0380-0x0383] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0480-0x04bf] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] could not be reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x3f7fffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 01-02] add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 01-02]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x3f810000-0xffffffff window]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0x3f810000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS 16 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4584K
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=14 max_order=18 bucket_order=4
zbud: loaded
Key type asymmetric registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
pcieport 0000:00:1c.2: enabling device (0106 -> 0107)
intel_idle: does not run on family 6 model 13
sched_clock: Marking unstable (2960022068, 22468714)<-(3339617601, -357126819)
tsc: Marking TSC unstable due to TSC halts in idle
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x6d8, pf=0x20, revision=0x20
microcode: Microcode Update Driver: v2.2.
Using IPI No-Shortcut mode
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 9:683:90
edac: hash matches
rtc_cmos 00:01: setting system clock to 2017-07-30 18:03:11 UTC (1501437791)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 700K
Write protecting the kernel text: 5744k
Write protecting the kernel read-only data: 1680k
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
SCSI subsystem initialized
ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
hub 5-0:1.0: USB hub found
libata version 3.00 loaded.
hub 5-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller is in combined mode, can't enable AHCI mode
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x9152a9901d, max_idle_ns: 440795205477 ns
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66
ata2.00: 7815024 sectors, multi 0: LBA
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-2: new high-speed USB device number 2 using ehci-pci
usb 1-3: new high-speed USB device number 3 using ehci-pci
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
random: fast init done
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
usb 3-2: new full-speed USB device number 2 using uhci_hcd
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 1-3.2: new low-speed USB device number 5 using ehci-pci
usb 1-5: new high-speed USB device number 6 using ehci-pci
usb 1-8: new high-speed USB device number 7 using ehci-pci
sd 1:0:0:0: Attached scsi generic sg0 type 0
usbip_core: USB/IP Core v1.0.0
EXT4-fs (sda1): re-mounted. Opts: nobarrier,noauto_da_alloc
usbcore: registered new device driver usbip-host
usbip_host: USB/IP Host Driver v1.0.0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: BRLTTY 5.5 Linux Screen Driver Keyboard as /devices/virtual/input/input2
media: Linux media interface: v0.10
usb-storage 1-5:1.0: USB Mass Storage device detected
hidraw: raw HID events driver (C) Jiri Kosina
scsi host2: usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
random: crng init done
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:2761)
uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: UVC Camera (eb1a:2761) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
ACPI: AC Adapter [AC0] (on-line)
eeepc_laptop: Eee PC Hotkey Driver
eeepc_laptop: model 701 does not officially support setting cpu speed
eeepc_laptop: cpufv disabled to avoid instability
eeepc_laptop: Hotkey init flags 0x41
eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
eeepc_laptop: Get control methods supported: 0x2101711
input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input9
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (37 C)
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
intel_rng: FWH not detected
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20170303/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\_SB.PCI0.SBRG.PMS0) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20170303/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.SMRG) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.97 GB/3.69 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
sd 2:0:0:0: [sdb] Attached SCSI removable disk
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
usbcore: registered new interface driver btusb
eeepc_laptop: Unable to find port
input: PC Speaker as /devices/platform/pcspkr/input/input13
dw2102: su3000_identify_state
dvb-usb: found a 'Terratec Cinergy S2 USB BOX' in warm state.
dw2102: su3000_power_ctrl: 1, initialized 0
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvbdev: DVB: registering new adapter (Terratec Cinergy S2 USB BOX)
dvb-usb: MAC address: bc:ea:2b:46:13:a5
ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
ath5k 0000:01:00.0: registered as 'phy0'
i2c i2c-0: Added multiplexed i2c bus 1
ts2020 1-0060: Montage Technology TS2022 successfully identified
usb 1-2: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
dw2102: su3000_power_ctrl: 0, initialized 1
dvb-usb: Terratec Cinergy S2 USB BOX successfully initialized and connected.
usbcore: registered new interface driver dw2102
usbcore: registered new interface driver dvb_usb_dvbsky
input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.0/0003:05AC:0250.0001/input/input15
apple 0003:05AC:0250.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:1d.7-3.2/input0
input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.1/0003:05AC:0250.0002/input/input16
apple 0003:05AC:0250.0002: input,hidraw1: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:1d.7-3.2/input1
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0/0x0, board id: 0, fw id: 409168
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
iTCO_vendor_support: vendor-support=0
atl2 0000:03:00.0 enp3s0: renamed from eth0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
mousedev: PS/2 mouse device common for all mice
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
ath5k 0000:01:00.0 wlp1s0: renamed from wlan0
NET: Registered protocol family 38
EXT4-fs (sda1): re-mounted. Opts: nobarrier,noauto_da_alloc
EXT4-fs (sda1): re-mounted. Opts: nobarrier,noauto_da_alloc
EXT4-fs (sdb): mounted filesystem without journal. Opts: nobarrier,noauto_da_alloc
atl2: enp3s0 NIC Link is Up<100 Mbps Full Duplex>
perf: interrupt took too long (2569 > 2500), lowering kernel.perf_event_max_sample_rate to 77700
perf: interrupt took too long (3212 > 3211), lowering kernel.perf_event_max_sample_rate to 62100
perf: interrupt took too long (4065 > 4015), lowering kernel.perf_event_max_sample_rate to 49200
perf: interrupt took too long (5083 > 5081), lowering kernel.perf_event_max_sample_rate to 39300
usb 1-2: USB disconnect, device number 2
dvb-usb: Terratec Cinergy S2 USB BOX successfully deinitialized and disconnected.
usb 1-2: new high-speed USB device number 8 using ehci-pci
scsi host3: uas
scsi 3:0:0:0: Direct-Access Samsung M3 Portable 1306 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 53 00 00 08
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem without journal. Opts: nobarrier,noauto_da_alloc
perf: interrupt took too long (6385 > 6353), lowering kernel.perf_event_max_sample_rate to 31200
EXT4-fs (sdc1): Delayed block allocation failed for inode 27155438 at logical offset 6561 with max blocks 6 with error 121
EXT4-fs (sdc1): This should not happen!! Data will be lost
Powered by blists - more mailing lists