linux-kernel - Re: [PATCH] PCI: xilinx: Remove platform/architecture restrictions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <16692965.isATtC65hJ@np-p-burton>
Date:   Mon, 31 Jul 2017 16:19:13 -0700
From:   Paul Burton <paul.burton@...tec.com>
To:     Bjorn Helgaas <helgaas@...nel.org>
CC:     Guenter Roeck <linux@...ck-us.net>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        <linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Michal Simek <michal.simek@...inx.com>,
        Sören Brinkmann <soren.brinkmann@...inx.com>,
        James Hogan <james.hogan@...tec.com>
Subject: Re: [PATCH] PCI: xilinx: Remove platform/architecture restrictions

Hi Bjorn,

On Monday, 31 July 2017 15:58:22 PDT Bjorn Helgaas wrote:
> On Mon, Jul 24, 2017 at 11:49:22AM +0100, Paul Burton wrote:
> > Hi Guenter & all,
> > 
> > On Monday, 24 July 2017 01:39:37 BST Guenter Roeck wrote:
> > > The MIPS Boston board configuration tries to enable CONFIG_PCIE_XILINX.
> > > That doesn't work since PCIE_XILINX depends on ARCH_ZYNQ || MICROBLAZE.
> > > Remove that restriction.
> > 
> > I'd prefer that this patch does not go in standalone. The intent for the
> > MIPS Boston board is that this driver is enabled for MIPS by this patch:
> > 
> > https://patchwork.kernel.org/patch/9794361/
> > 
> > But not until after earlier patches in that series fix issues with the
> > driver:
> > 
> > https://patchwork.kernel.org/patch/9794355/
> > https://patchwork.kernel.org/patch/9794357/
> > https://patchwork.kernel.org/patch/9794359/
> > 
> > That has been held up by disagreement about whether the driver should be
> > using 0-3 or 1-4 for hardware IRQ numbers, sadly, despite the driver
> > already being in tree & clearly broken, and my series not changing which
> > the driver uses...
>
> It's true that your v5 series only changes xilinx from using hwirq 0-3
> to 0-4 (with 0 being unused in both cases, and the addition of 4
> fixing the "INTD doesn't work" bug).

That isn't true - the xilinx-pcie driver already uses 1-4, and my change 
simply prevents it from hitting a WARN() in the IRQ code when doing so.

> However, I *would* like to see this issue cleaned up consistently
> across all our drivers.  I mooted a couple ideas in [1], but nobody
> seemed interested.  If I merged your series as-is, there would be even
> less interest.

I've been travelling & haven't had time to look at any reworks as of yet, but 
I do think the driver as-is is clearly broken & my fix is a pretty obvious 
one, even if you would like the driver(s) to improve further in future.

Thanks,
    Paul

> [1]
> http://lkml.kernel.org/r/20170712221455.GJ14614@bhelgaas-glaptop.roam.corp.
> google.com
> > In any case, I don't really mind if people would rather remove the
> > architecture restrictions than just add MIPS, but I'd prefer this doesn't
> > go in until the rest of my series since without at least patch 1 of my
> > seres this will lead to various WARN()s on Boston boards.
> > 
> > Thanks,
> > 
> >     Paul
> > > 
> > > Cc: Paul Burton <paul.burton@...tec.com>
> > > Cc: James Hogan <james.hogan@...tec.com>
> > > Signed-off-by: Guenter Roeck <linux@...ck-us.net>
> > > ---
> > > 
> > >  drivers/pci/host/Kconfig | 1 -
> > >  1 file changed, 1 deletion(-)
> > > 
> > > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> > > index 89d61c2cbfaa..ed905a5401c3 100644
> > > --- a/drivers/pci/host/Kconfig
> > > +++ b/drivers/pci/host/Kconfig
> > > @@ -71,7 +71,6 @@ config PCI_HOST_GENERIC
> > > 
> > >  config PCIE_XILINX
> > >  
> > >  	bool "Xilinx AXI PCIe host bridge support"
> > > 
> > > -	depends on ARCH_ZYNQ || MICROBLAZE
> > > 
> > >  	help
> > >  	
> > >  	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
> > >  	  Host Bridge driver.


Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)