[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170802170930.26083-1-srinivas.kandagatla@linaro.org>
Date: Wed, 2 Aug 2017 19:09:24 +0200
From: srinivas.kandagatla@...aro.org
To: Mark Brown <broonie@...nel.org>,
Banajit Goswami <bgoswami@...eaurora.org>,
alsa-devel@...a-project.org
Cc: damien.riegel@...oirfairelinux.com,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Patrick Lai <plai@...eaurora.org>,
linux-kernel@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v2 0/6] ASoC: codecs: msm8916-wcd-analog: Add support to MBHC
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
This patchset adds support to MBHC(Multibutton headset control) block in PM8916
analog block. MBHC support comes from2 blocks first mechanical headset detection
and second headset type, 5 button detection.
This patchset adds support to:
1> Support to NC and NO type of headset Jacks.
2> Mechanical insertion and detection of headset jack.
3> Detect a 3 pole Headphone and a 4 pole Headset.
4> Detect 5 buttons.
Damien sent a similar patchset to add support to mechanical detection,
but that patch has issues and will not work on most usecases (for example
after a playback/capture session, multicodec case). So I only picked up
the BIT mask patch from that series.
Tested it on DB410c with Audio Mezz board with 4 pole and 3 pole
and during playback and recording use cases.
Changes since v1(https://www.spinics.net/lists/kernel/msg2565463.html):
- Micbias left to hardware default value suggested by Mark.
- Updated commit log to reflect low power state for mbhc
- cleaned up code spotted by Mark.
- Moved the button voltage threshold to dt, suggested by Mark
- Fixed key release issue reported by Damien
Srinivas Kandagatla (6):
ASoC: jack: fix snd_soc_codec_set_jack return error
ASoC: codecs: msm8916-wcd-analog: move codec reset to probe
ASoC: codecs: msm8916-wcd-analog: get micbias voltage from dt
ASoC: codecs: msm8916-wcd-analog: add MBHC support
ASoC: qcom: apq8016-sbc: Add support to Headset JACK
arm64: dts: apq8016-sbc: add mbhc buttons support
.../bindings/sound/qcom,msm8916-wcd-analog.txt | 18 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +
sound/soc/codecs/msm8916-wcd-analog.c | 412 +++++++++++++++++++--
sound/soc/qcom/apq8016_sbc.c | 34 ++
sound/soc/soc-jack.c | 2 +-
5 files changed, 444 insertions(+), 24 deletions(-)
--
2.9.3
Powered by blists - more mailing lists