| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4492534a-9c30-94c5-eae7-dc17f0e9d057@suse.de>
Date: Thu, 3 Aug 2017 08:24:59 +0200
From: Hannes Reinecke <hare@...e.de>
To: Suganath Prabu S <suganath-prabu.subramani@...adcom.com>,
jejb@...nel.org, hch@...radead.org
Cc: martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
Sathya.Prakash@...adcom.com, kashyap.desai@...adcom.com,
linux-kernel@...r.kernel.org, chaitra.basappa@...adcom.com,
sreekanth.reddy@...adcom.com, linux-nvme@...ts.infradead.org
Subject: Re: [PATCH v2 01/13] mpt3sas: Update MPI Header
On 07/14/2017 03:22 PM, Suganath Prabu S wrote:
> Update MPI Files for NVMe support
>
> Signed-off-by: Chaitra P B <chaitra.basappa@...adcom.com>
> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@...adcom.com>
> ---
> drivers/scsi/mpt3sas/mpi/mpi2.h | 43 +++-
> drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 647 +++++++++++++++++++++++++++++++++-
> drivers/scsi/mpt3sas/mpi/mpi2_init.h | 11 +-
> drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 331 +++++++++++++++++-
> drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 142 ++++++++
> drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 14 +-
> 6 files changed, 1177 insertions(+), 11 deletions(-)
> create mode 100644 drivers/scsi/mpt3sas/mpi/mpi2_pci.h
>
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
> index a9a659f..bc59058 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
> @@ -8,7 +8,7 @@
> * scatter/gather formats.
> * Creation Date: June 21, 2006
> *
> - * mpi2.h Version: 02.00.42
> + * mpi2.h Version: 02.00.48
> *
> * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
> * prefix are for use only on MPI v2.5 products, and must not be used
> @@ -103,6 +103,16 @@
> * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT.
> * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT
> * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT
> + * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines
> + * to be unique within first 32 characters.
> + * Removed AHCI support.
> + * Removed SOP support.
> + * Bumped MPI2_HEADER_VERSION_UNIT.
> + * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT.
> + * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT.
> + * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT.
> + * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT.
> + * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT.
> * --------------------------------------------------------------------------
> */
>
> @@ -142,7 +152,7 @@
> #define MPI2_VERSION_02_06 (0x0206)
>
> /*Unit and Dev versioning for this MPI header set */
> -#define MPI2_HEADER_VERSION_UNIT (0x2A)
> +#define MPI2_HEADER_VERSION_UNIT (0x30)
> #define MPI2_HEADER_VERSION_DEV (0x00)
> #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
> #define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
> @@ -249,6 +259,12 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
> #define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000)
> #define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800)
>
> +/* Defines for V7A/V7R HostDiagnostic Register */
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000)
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800)
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000)
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800)
> +
> #define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
> #define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200)
> #define MPI2_DIAG_HCB_MODE (0x00000100)
> @@ -367,6 +383,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
> #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
> #define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
> #define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C)
> +#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10)
>
> #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
>
> @@ -425,6 +442,13 @@ typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
> Mpi25FastPathSCSIIORequestDescriptor_t,
> *pMpi25FastPathSCSIIORequestDescriptor_t;
>
> +/*PCIe Encapsulated Request Descriptor */
> +typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
> + MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
> + *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
> + Mpi26PCIeEncapsulatedRequestDescriptor_t,
> + *pMpi26PCIeEncapsulatedRequestDescriptor_t;
> +
> /*union of Request Descriptors */
> typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
> MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
> @@ -433,6 +457,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
> MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
> MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
> MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
> + MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated;
> U64 Words;
> } MPI2_REQUEST_DESCRIPTOR_UNION,
> *PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
> @@ -450,6 +475,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
> * Atomic SCSI Target Request Descriptor
> * Atomic RAID Accelerator Request Descriptor
> * Atomic Fast Path SCSI IO Request Descriptor
> + * Atomic PCIe Encapsulated Request Descriptor
> */
>
> /*Atomic Request Descriptor */
> @@ -487,6 +513,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR {
> #define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
> #define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
> #define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06)
> +#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08)
> #define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
>
> /*values for marking a reply descriptor as unused */
> @@ -565,6 +592,13 @@ typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
> Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
> *pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
>
> +/*PCIe Encapsulated Success Reply Descriptor */
> +typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
> + MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
> + *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
> + Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
> + *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
> +
> /*union of Reply Descriptors */
> typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
> MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
> @@ -574,6 +608,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
> MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
> MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
> MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
> + MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR
> + PCIeEncapsulatedSuccess;
> U64 Words;
> } MPI2_REPLY_DESCRIPTORS_UNION,
> *PTR_MPI2_REPLY_DESCRIPTORS_UNION,
> @@ -616,6 +652,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
> #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F)
> #define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30)
> #define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31)
> +#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33)
> #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0)
> #define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF)
>
> @@ -1162,6 +1199,8 @@ typedef union _MPI25_SGE_IO_UNION {
>
> #define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C)
> #define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00)
> +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08)
> +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10)
>
> /*Data Location Address Space */
>
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
> index fa61baf..3bb6833 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
> @@ -6,7 +6,7 @@
> * Title: MPI Configuration messages and pages
> * Creation Date: November 10, 2006
> *
> - * mpi2_cnfg.h Version: 02.00.35
> + * mpi2_cnfg.h Version: 02.00.40
> *
> * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
> * prefix are for use only on MPI v2.5 products, and must not be used
> @@ -189,6 +189,35 @@
> * MPI2_CONFIG_PAGE_BIOS_1.
> * 08-25-15 02.00.34 Bumped Header Version.
> * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4.
> + * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
> + * Added Link field to PCIe Link Pages
> + * Added EnclosureLevel and ConnectorName to PCIe
> + * Device Page 0.
> + * Added define for PCIE IoUnit page 1 max rate shift.
> + * Added comment for reserved ExtPageTypes.
> + * Added SAS 4 22.5 gbs speed support.
> + * Added PCIe 4 16.0 GT/sec speec support.
> + * Removed AHCI support.
> + * Removed SOP support.
> + * Added NegotiatedLinkRate and NegotiatedPortWidth to
> + * PCIe device page 0.
> + * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
> + * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types.
> + * Changed declaration of ConnectorName in PCIe DevicePage0
> + * to match SAS DevicePage 0.
> + * Added SATADeviceWaitTime to IO Unit Page 11.
> + * Added MPI26_MFGPAGE_DEVID_SAS4008
> + * Added x16 PCIe width to IO Unit Page 7
> + * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
> + * phy data.
> + * Added InitStatus to PCIe IO Unit Page 1 header.
> + * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
> + * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
> + * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
> + * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN.
> + * Added ChassisSlot field to SAS Enclosure Page 0.
> + * Added ChassisSlot Valid bit (bit 5) to the Flags field
> + * in SAS Enclosure Page 0.
> * --------------------------------------------------------------------------
> */
>
> @@ -272,6 +301,10 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
> #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
> #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
> #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E)
>
>
> /*****************************************************************************
> @@ -339,6 +372,12 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
>
> #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
>
> +/*Enclosure PageAddress format */
> +#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000)
> +#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
> +#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
> +
> +#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
>
> /*RAID Configuration PageAddress format */
> #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
> @@ -365,6 +404,33 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
> #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
>
>
> +/*PCIe Switch PageAddress format */
> +#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000)
> +#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
> +#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000)
> +#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000)
> +
> +#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF)
> +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000)
> +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16)
> +
> +
> +/*PCIe Device PageAddress format */
> +#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000)
> +#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
> +#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000)
> +
> +#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
> +
> +/*PCIe Link PageAddress format */
> +#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000)
> +#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000)
> +#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000)
> +
> +#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF)
> +
> +
> +
> /****************************************************************************
> * Configuration messages
> ****************************************************************************/
> @@ -484,6 +550,12 @@ typedef struct _MPI2_CONFIG_REPLY {
> #define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD)
> #define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE)
> #define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF)
> +#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0)
> +#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1)
> +#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2)
> +
> +#define MPI26_MFGPAGE_DEVID_SAS4008 (0x00A1)
> +
>
> /*Manufacturing Page 0 */
>
> @@ -726,6 +798,12 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
> #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
> #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
> #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13)
>
> /*defines for the Location field */
> #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
> @@ -736,6 +814,9 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
> #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
> #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
>
> +/*defines for the Slot field */
> +#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF)
> +
> /*
> *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> *one and check the value returned for NumPhys at runtime.
> @@ -999,11 +1080,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
> #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
> #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
> #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
> +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10)
>
> /*defines for IO Unit Page 7 PCIeSpeed field */
> #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
> #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
> #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
> +#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03)
>
> /*defines for IO Unit Page 7 ProcessorState field */
> #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
> @@ -1970,6 +2053,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
> #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
> #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
> #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
> +#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C)
>
>
> /*values for AttachedPhyInfo fields */
> @@ -2037,12 +2121,14 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
> #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
> #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
> #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
> +#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0)
> #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
> #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
> #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
> #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
> #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
> #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
> +#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C)
>
>
> /*values for SAS HwLinkRate fields */
> @@ -2051,11 +2137,13 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
> #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
> #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
> #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
> +#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0)
> #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
> #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
> #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
> #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
> #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
> +#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C)
>
>
>
> @@ -2240,11 +2328,13 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
> #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
> #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
> #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
> +#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0)
> #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
> #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
> #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
> #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
> #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
> +#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C)
>
> /*see mpi2_sas.h for values for
> *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
> @@ -3173,7 +3263,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
> U16
> StartSlot; /*0x1A */
> U8
> - Reserved2; /*0x1C */
> + ChassisSlot; /*0x1C */
> U8
> EnclosureLevel; /*0x1D */
> U16
> @@ -3184,11 +3274,15 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
> Reserved4; /*0x24 */
> } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
> *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
> - Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
> + Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
> + MPI26_CONFIG_PAGE_ENCLOSURE_0,
> + *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
> + Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
>
> #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
>
> /*values for SAS Enclosure Page 0 Flags field */
> +#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
> #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
> #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
> #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
> @@ -3198,6 +3292,18 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
> #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
> #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
>
> +#define MPI26_ENCLOSURE0_PAGEVERSION (0x04)
> +
> +/*Values for Enclosure Page 0 Flags field */
> +#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020)
> +#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
> +#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F)
> +#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
> +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
> +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
> +#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
> +#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
> +#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
>
> /****************************************************************************
> * Log Config Page
> @@ -3497,4 +3603,539 @@ typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
>
> /*PageVersion should be provided by product-specific code */
>
> +
> +
> +/****************************************************************************
> +* values for fields used by several types of PCIe Config Pages
> +****************************************************************************/
> +
> +/*values for NegotiatedLinkRates fields */
> +#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
> +/*link rates used for Negotiated Physical Link Rate */
> +#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00)
> +#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01)
> +#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02)
> +#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03)
> +#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04)
> +#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05)
> +
> +
> +/****************************************************************************
> +* PCIe IO Unit Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe IO Unit Page 0 */
> +
> +typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
> + U8
> + Link; /*0x00 */
> + U8
> + LinkFlags; /*0x01 */
> + U8
> + PhyFlags; /*0x02 */
> + U8
> + NegotiatedLinkRate; /*0x03 */
> + U32
> + ControllerPhyDeviceInfo;/*0x04 */
> + U16
> + AttachedDevHandle; /*0x08 */
> + U16
> + ControllerDevHandle; /*0x0A */
> + U32
> + EnumerationStatus; /*0x0C */
> + U32
> + Reserved1; /*0x10 */
> +} MPI26_PCIE_IO_UNIT0_PHY_DATA,
> + *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
> + Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumPhys at runtime.
> + */
> +#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
> +#define MPI26_PCIE_IOUNIT0_PHY_MAX (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U32
> + Reserved1; /*0x08 */
> + U8
> + NumPhys; /*0x0C */
> + U8
> + InitStatus; /*0x0D */
> + U16
> + Reserved3; /*0x0E */
> + MPI26_PCIE_IO_UNIT0_PHY_DATA
> + PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */
> +} MPI26_CONFIG_PAGE_PIOUNIT_0,
> + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
> + Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
> +
> +#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00)
> +
> +/*values for PCIe IO Unit Page 0 LinkFlags */
> +#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
> +
> +/*values for PCIe IO Unit Page 0 PhyFlags */
> +#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
> +
> +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
> +
> +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
> + *values
> + */
> +
> +/*values for PCIe IO Unit Page 0 EnumerationStatus */
> +#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000)
> +#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000)
> +
> +
> +/*PCIe IO Unit Page 1 */
> +
> +typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
> + U8
> + Link; /*0x00 */
> + U8
> + LinkFlags; /*0x01 */
> + U8
> + PhyFlags; /*0x02 */
> + U8
> + MaxMinLinkRate; /*0x03 */
> + U32
> + ControllerPhyDeviceInfo; /*0x04 */
> + U32
> + Reserved1; /*0x08 */
> +} MPI26_PCIE_IO_UNIT1_PHY_DATA,
> + *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
> + Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
> +
> +/*values for LinkFlags */
> +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00)
> +#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01)
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumPhys at runtime.
> + */
> +#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
> +#define MPI26_PCIE_IOUNIT1_PHY_MAX (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U16
> + ControlFlags; /*0x08 */
> + U16
> + Reserved; /*0x0A */
> + U16
> + AdditionalControlFlags; /*0x0C */
> + U16
> + NVMeMaxQueueDepth; /*0x0E */
> + U8
> + NumPhys; /*0x10 */
> + U8
> + Reserved1; /*0x11 */
> + U16
> + Reserved2; /*0x12 */
> + MPI26_PCIE_IO_UNIT1_PHY_DATA
> + PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
> +} MPI26_CONFIG_PAGE_PIOUNIT_1,
> + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
> + Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
> +
> +#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00)
> +
> +/*values for PCIe IO Unit Page 1 PhyFlags */
> +#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
> +#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01)
> +
> +/*values for PCIe IO Unit Page 1 MaxMinLinkRate */
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50)
> +
> +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
> + *values
> + */
> +
> +
> +/****************************************************************************
> +* PCIe Switch Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe Switch Page 0 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U8
> + PhysicalPort; /*0x08 */
> + U8
> + Reserved1; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U16
> + DevHandle; /*0x0C */
> + U16
> + ParentDevHandle; /*0x0E */
> + U8
> + NumPorts; /*0x10 */
> + U8
> + PCIeLevel; /*0x11 */
> + U16
> + Reserved3; /*0x12 */
> + U32
> + Reserved4; /*0x14 */
> + U32
> + Reserved5; /*0x18 */
> + U32
> + Reserved6; /*0x1C */
> +} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
> + Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
> +
> +#define MPI26_PCIESWITCH0_PAGEVERSION (0x00)
> +
> +
> +/*PCIe Switch Page 1 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U8
> + PhysicalPort; /*0x08 */
> + U8
> + Reserved1; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U8
> + NumPorts; /*0x0C */
> + U8
> + PortNum; /*0x0D */
> + U16
> + AttachedDevHandle; /*0x0E */
> + U16
> + SwitchDevHandle; /*0x10 */
> + U8
> + NegotiatedPortWidth; /*0x12 */
> + U8
> + NegotiatedLinkRate; /*0x13 */
> + U32
> + Reserved4; /*0x14 */
> + U32
> + Reserved5; /*0x18 */
> +} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
> + Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
> +
> +#define MPI26_PCIESWITCH1_PAGEVERSION (0x00)
> +
> +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
> +
> +
> +/****************************************************************************
> +* PCIe Device Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe Device Page 0 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U16
> + Slot; /*0x08 */
> + U16
> + EnclosureHandle; /*0x0A */
> + U64
> + WWID; /*0x0C */
> + U16
> + ParentDevHandle; /*0x14 */
> + U8
> + PortNum; /*0x16 */
> + U8
> + AccessStatus; /*0x17 */
> + U16
> + DevHandle; /*0x18 */
> + U8
> + PhysicalPort; /*0x1A */
> + U8
> + Reserved1; /*0x1B */
> + U32
> + DeviceInfo; /*0x1C */
> + U32
> + Flags; /*0x20 */
> + U8
> + SupportedLinkRates; /*0x24 */
> + U8
> + MaxPortWidth; /*0x25 */
> + U8
> + NegotiatedPortWidth; /*0x26 */
> + U8
> + NegotiatedLinkRate; /*0x27 */
> + U8
> + EnclosureLevel; /*0x28 */
> + U8
> + Reserved2; /*0x29 */
> + U16
> + Reserved3; /*0x2A */
> + U8
> + ConnectorName[4]; /*0x2C */
> + U32
> + Reserved4; /*0x30 */
> + U32
> + Reserved5; /*0x34 */
> +} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
> + Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
> +
> +#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01)
> +
> +/*values for PCIe Device Page 0 AccessStatus field */
> +#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00)
> +#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04)
> +#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02)
> +#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07)
> +#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08)
> +#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09)
> +#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A)
> +#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10)
> +
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38)
> +
> +#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F)
> +
> +/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
> + *field
> + */
> +
> +/*values for PCIe Device Page 0 Flags field */
> +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
> +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000)
> +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000)
> +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200)
> +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010)
> +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002)
> +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001)
> +
> +/* values for PCIe Device Page 0 SupportedLinkRates field */
> +#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08)
> +#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04)
> +#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02)
> +#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01)
> +
> +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
> +
> +
> +/*PCIe Device Page 2 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U16
> + DevHandle; /*0x08 */
> + U16
> + Reserved1; /*0x0A */
> + U32
> + MaximumDataTransferSize;/*0x0C */
> + U32
> + Capabilities; /*0x10 */
> + U32
> + Reserved2; /*0x14 */
> +} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
> + Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
> +
> +#define MPI26_PCIEDEVICE2_PAGEVERSION (0x00)
> +
> +/*defines for PCIe Device Page 2 Capabilities field */
> +#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004)
> +#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002)
> +#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001)
> +
> +
> +/****************************************************************************
> +* PCIe Link Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe Link Page 1 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U8
> + Link; /*0x08 */
> + U8
> + Reserved1; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U32
> + CorrectableErrorCount; /*0x0C */
> + U16
> + NonFatalErrorCount; /*0x10 */
> + U16
> + Reserved3; /*0x12 */
> + U16
> + FatalErrorCount; /*0x14 */
> + U16
> + Reserved4; /*0x16 */
> +} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
> + Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
> +
> +#define MPI26_PCIELINK1_PAGEVERSION (0x00)
> +
> +/*PCIe Link Page 2 */
> +
> +typedef struct _MPI26_PCIELINK2_LINK_EVENT {
> + U8
> + LinkEventCode; /*0x00 */
> + U8
> + Reserved1; /*0x01 */
> + U16
> + Reserved2; /*0x02 */
> + U32
> + LinkEventInfo; /*0x04 */
> +} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
> + Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
> +
> +/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
> +
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumLinkEvents at runtime.
> + */
> +#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
> +#define MPI26_PCIELINK2_LINK_EVENT_MAX (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U8
> + Link; /*0x08 */
> + U8
> + Reserved1; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U8
> + NumLinkEvents; /*0x0C */
> + U8
> + Reserved3; /*0x0D */
> + U16
> + Reserved4; /*0x0E */
> + MPI26_PCIELINK2_LINK_EVENT
> + LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
> +} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
> + Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
> +
> +#define MPI26_PCIELINK2_PAGEVERSION (0x00)
> +
> +/*PCIe Link Page 3 */
> +
> +typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
> + U8
> + LinkEventCode; /*0x00 */
> + U8
> + Reserved1; /*0x01 */
> + U16
> + Reserved2; /*0x02 */
> + U8
> + CounterType; /*0x04 */
> + U8
> + ThresholdWindow; /*0x05 */
> + U8
> + TimeUnits; /*0x06 */
> + U8
> + Reserved3; /*0x07 */
> + U32
> + EventThreshold; /*0x08 */
> + U16
> + ThresholdFlags; /*0x0C */
> + U16
> + Reserved4; /*0x0E */
> +} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
> + Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
> +
> +/*values for LinkEventCode field */
> +#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00)
> +#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01)
> +#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02)
> +#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03)
> +#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04)
> +#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05)
> +#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06)
> +#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07)
> +#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08)
> +#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F)
> +#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10)
> +#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11)
> +#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12)
> +
> +/*values for the CounterType field */
> +#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00)
> +#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01)
> +#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02)
> +
> +/*values for the TimeUnits field */
> +#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00)
> +#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01)
> +#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02)
> +#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03)
> +
> +/*values for the ThresholdFlags field */
> +#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001)
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumLinkEvents at runtime.
> + */
> +#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
> +#define MPI26_PCIELINK3_LINK_EVENT_MAX (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
> + MPI2_CONFIG_EXTENDED_PAGE_HEADER
> + Header; /*0x00 */
> + U8
> + Link; /*0x08 */
> + U8
> + Reserved1; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U8
> + NumLinkEvents; /*0x0C */
> + U8
> + Reserved3; /*0x0D */
> + U16
> + Reserved4; /*0x0E */
> + MPI26_PCIELINK3_LINK_EVENT_CONFIG
> + LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
> +} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
> + Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
> +
> +#define MPI26_PCIELINK3_PAGEVERSION (0x00)
> +
> +
> #endif
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
> index bba56b6..7597c24 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
> @@ -6,7 +6,7 @@
> * Title: MPI SCSI initiator mode messages and structures
> * Creation Date: June 23, 2006
> *
> - * mpi2_init.h Version: 02.00.20
> + * mpi2_init.h Version: 02.00.21
> *
> * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
> * prefix are for use only on MPI v2.5 products, and must not be used
> @@ -54,6 +54,8 @@
> * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
> * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
> * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message.
> + * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
> + * be unique within first 32 characters.
> * --------------------------------------------------------------------------
> */
>
> @@ -373,6 +375,11 @@ typedef struct _MPI2_SCSI_IO_REPLY {
> } MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
> Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
>
> +/*SCSI IO Reply MsgFlags bits */
> +#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
> +#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02)
> +#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04)
> +
> /*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
>
> #define MPI2_SCSI_STATUS_GOOD (0x00)
> @@ -446,11 +453,13 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
> /*MsgFlags bits */
>
> #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
> +#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00)
> #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
> #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
> #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
>
> #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
> +#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
>
> /*SCSI Task Management Reply Message */
> typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
> index af4be40..816ade3 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
> @@ -6,7 +6,7 @@
> * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
> * Creation Date: October 11, 2006
> *
> - * mpi2_ioc.h Version: 02.00.27
> + * mpi2_ioc.h Version: 02.00.32
> *
> * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
> * prefix are for use only on MPI v2.5 products, and must not be used
> @@ -140,7 +140,32 @@
> * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
> * MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
> * Added MPI26_CTRL_OP_SHUTDOWN.
> - * 08-25-15 02.00.27 Added IC ARCH Class based signature defines
> + * 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
> + * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
> + * Added ConigurationFlags field to IOCInit message to
> + * support NVMe SGL format control.
> + * Added PCIe SRIOV support.
> + * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
> + * Added PCIe 4 16.0 GT/sec speec support.
> + * Removed AHCI support.
> + * Removed SOP support.
> + * 07-01-16 02.00.29 Added Archclass for 4008 product.
> + * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
> + * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
> + * Request Message.
> + * Added new defines for the ImageType field of FWUpload
> + * Request Message.
> + * Added new values for the RegionType field in the Layout
> + * Data sections of the FLASH Layout Extended Image Data.
> + * Added new defines for the ReasonCode field of
> + * Active Cable Exception Event.
> + * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
> + * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
> + * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
> + * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
> + * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
> + * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
> + * defines for the ReasonCode field.
> * --------------------------------------------------------------------------
> */
>
> @@ -212,6 +237,9 @@ typedef struct _MPI2_IOC_INIT_REQUEST {
> #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
> #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
>
> +/*ConfigurationFlags */
> +#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001)
> +
> /*minimum depth for a Reply Descriptor Post Queue */
> #define MPI2_RDPQ_DEPTH_MIN (16)
>
> @@ -299,6 +327,10 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
> U16 MinDevHandle; /*0x3C */
> U8 CurrentHostPageSize; /* 0x3E */
> U8 Reserved4; /* 0x3F */
> + U8 SGEModifierMask; /*0x40 */
> + U8 SGEModifierValue; /*0x41 */
> + U8 SGEModifierShift; /*0x42 */
> + U8 Reserved5; /*0x43 */
> } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
> Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
>
> @@ -315,6 +347,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
> #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
>
> /*IOCExceptions */
> +#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400)
> #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
> #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
>
> @@ -335,6 +368,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
> /*ProductID field uses MPI2_FW_HEADER_PID_ */
>
> /*IOCCapabilities */
> +#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000)
> #define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
> #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
> #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
> @@ -353,6 +387,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
> #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
>
> /*ProtocolFlags */
> +#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008)
> #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
> #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
>
> @@ -402,6 +437,8 @@ typedef struct _MPI2_PORT_FACTS_REPLY {
> #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
> #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
> #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
> +#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40)
> +
>
> /****************************************************************************
> * PortEnable message
> @@ -508,6 +545,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
> #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
> #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
> #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
> +#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D)
> #define MPI2_EVENT_IR_VOLUME (0x001E)
> #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
> #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
> @@ -520,7 +558,12 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
> #define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
> #define MPI2_EVENT_HOST_MESSAGE (0x0028)
> #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
> +#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030)
> +#define MPI2_EVENT_PCIE_ENUMERATION (0x0031)
> +#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032)
> +#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033)
> #define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
> +#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035)
> #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
> #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
>
> @@ -617,11 +660,20 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
> U8 ReasonCode; /* 0x04 */
> U8 ReceptacleID; /* 0x05 */
> U16 Reserved1; /* 0x06 */
> -} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> +} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> + *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> + Mpi25EventDataActiveCableExcept_t,
> + *pMpi25EventDataActiveCableExcept_t,
> + MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> Mpi26EventDataActiveCableExcept_t,
> *pMpi26EventDataActiveCableExcept_t;
>
> +/*MPI2.5 defines for the ReasonCode field */
> +#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
> +#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01)
> +#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
> +
> /* defines for ReasonCode field */
> #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
> #define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
> @@ -957,6 +1009,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
> #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
> #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
> #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
> +#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
>
> /*values for the PhyStatus field */
> #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
> @@ -982,12 +1035,43 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
> } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
> *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
> Mpi2EventDataSasEnclDevStatusChange_t,
> - *pMpi2EventDataSasEnclDevStatusChange_t;
> + *pMpi2EventDataSasEnclDevStatusChange_t,
> + MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
> + *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
> + Mpi26EventDataEnclDevStatusChange_t,
> + *pMpi26EventDataEnclDevStatusChange_t;
>
> /*SAS Enclosure Device Status Change event ReasonCode values */
> #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
> #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
>
> +/*Enclosure Device Status Change event ReasonCode values */
> +#define MPI26_EVENT_ENCL_RC_ADDED (0x01)
> +#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02)
> +
> +
> +typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
> + U16
> + DevHandle; /*0x00 */
> + U8
> + ReasonCode; /*0x02 */
> + U8
> + PhysicalPort; /*0x03 */
> + U32
> + Reserved1[2]; /*0x04 */
> + U64
> + SASAddress; /*0x0C */
> + U32
> + Reserved2[2]; /*0x14 */
> +} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
> + *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
> + Mpi25EventDataSasDeviceDiscoveryError_t,
> + *pMpi25EventDataSasDeviceDiscoveryError_t;
> +
> +/*SAS Device Discovery Error Event data ReasonCode values */
> +#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01)
> +#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02)
> +
> /*SAS PHY Counter Event data */
>
> typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
> @@ -1073,6 +1157,217 @@ typedef struct _MPI2_EVENT_DATA_HBD_PHY {
> /*values for the DescriptorType field */
> #define MPI2_EVENT_HBD_DT_SAS (0x01)
>
> +
> +/*PCIe Device Status Change Event data (MPI v2.6 and later) */
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
> + U16
> + TaskTag; /*0x00 */
> + U8
> + ReasonCode; /*0x02 */
> + U8
> + PhysicalPort; /*0x03 */
> + U8
> + ASC; /*0x04 */
> + U8
> + ASCQ; /*0x05 */
> + U16
> + DevHandle; /*0x06 */
> + U32
> + Reserved2; /*0x08 */
> + U64
> + WWID; /*0x0C */
> + U8
> + LUN[8]; /*0x14 */
> +} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
> + *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
> + Mpi26EventDataPCIeDeviceStatusChange_t,
> + *pMpi26EventDataPCIeDeviceStatusChange_t;
> +
> +/*PCIe Device Status Change Event data ReasonCode values */
> +#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10)
> +
> +
> +/*PCIe Enumeration Event data (MPI v2.6 and later) */
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
> + U8
> + Flags; /*0x00 */
> + U8
> + ReasonCode; /*0x01 */
> + U8
> + PhysicalPort; /*0x02 */
> + U8
> + Reserved1; /*0x03 */
> + U32
> + EnumerationStatus; /*0x04 */
> +} MPI26_EVENT_DATA_PCIE_ENUMERATION,
> + *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
> + Mpi26EventDataPCIeEnumeration_t,
> + *pMpi26EventDataPCIeEnumeration_t;
> +
> +/*PCIe Enumeration Event data Flags values */
> +#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02)
> +#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01)
> +
> +/*PCIe Enumeration Event data ReasonCode values */
> +#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01)
> +#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
> +
> +/*PCIe Enumeration Event data EnumerationStatus values */
> +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
> +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
> +#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
> +
> +
> +/*PCIe Topology Change List Event data (MPI v2.6 and later) */
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check NumEntries at runtime.
> + */
> +#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
> +#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
> +#endif
> +
> +typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
> + U16
> + AttachedDevHandle; /*0x00 */
> + U8
> + PortStatus; /*0x02 */
> + U8
> + Reserved1; /*0x03 */
> + U8
> + CurrentPortInfo; /*0x04 */
> + U8
> + Reserved2; /*0x05 */
> + U8
> + PreviousPortInfo; /*0x06 */
> + U8
> + Reserved3; /*0x07 */
> +} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
> + *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
> + Mpi26EventPCIeTopoPortEntry_t,
> + *pMpi26EventPCIeTopoPortEntry_t;
> +
> +/*PCIe Topology Change List Event data PortStatus values */
> +#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01)
> +#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
> +#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
> +#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
> +#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
> +
> +/*PCIe Topology Change List Event data defines for CurrentPortInfo and
> + *PreviousPortInfo
> + */
> +#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0)
> +#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
> +#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10)
> +#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
> +#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
> +#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
> +
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
> + U16
> + EnclosureHandle; /*0x00 */
> + U16
> + SwitchDevHandle; /*0x02 */
> + U8
> + NumPorts; /*0x04 */
> + U8
> + Reserved1; /*0x05 */
> + U16
> + Reserved2; /*0x06 */
> + U8
> + NumEntries; /*0x08 */
> + U8
> + StartPortNum; /*0x09 */
> + U8
> + SwitchStatus; /*0x0A */
> + U8
> + PhysicalPort; /*0x0B */
> + MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
> + PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
> +} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
> + *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
> + Mpi26EventDataPCIeTopologyChangeList_t,
> + *pMpi26EventDataPCIeTopologyChangeList_t;
> +
> +/*PCIe Topology Change List Event data SwitchStatus values */
> +#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
> +#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01)
> +#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
> +#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
> +#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
> +
> +/*PCIe Link Counter Event data (MPI v2.6 and later) */
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
> + U64
> + TimeStamp; /*0x00 */
> + U32
> + Reserved1; /*0x08 */
> + U8
> + LinkEventCode; /*0x0C */
> + U8
> + LinkNum; /*0x0D */
> + U16
> + Reserved2; /*0x0E */
> + U32
> + LinkEventInfo; /*0x10 */
> + U8
> + CounterType; /*0x14 */
> + U8
> + ThresholdWindow; /*0x15 */
> + U8
> + TimeUnits; /*0x16 */
> + U8
> + Reserved3; /*0x17 */
> + U32
> + EventThreshold; /*0x18 */
> + U16
> + ThresholdFlags; /*0x1C */
> + U16
> + Reserved4; /*0x1E */
> +} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
> + *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
> + Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
> +
> +
> +/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
> + *field
> + */
> +
> +/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
> + *field
> + */
> +
> +/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
> + *field
> + */
> +
> +/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
> + *field
> + */
> +
> /****************************************************************************
> * EventAck message
> ****************************************************************************/
> @@ -1190,6 +1485,14 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
> #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
> #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
> #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
> +#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D)
> +#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E)
> +#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F)
> +#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10)
> +#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11)
> +#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
> +#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
> +#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
> #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
>
> /*MPI v2.0 FWDownload TransactionContext Element */
> @@ -1276,6 +1579,14 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST {
> #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
> #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
> #define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
> +#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E)
> +#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F)
> +#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10)
> +#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11)
> +#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12)
> +#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13)
> +#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14)
> +
>
> /*MPI v2.0 FWUpload TransactionContext Element */
> typedef struct _MPI2_FW_UPLOAD_TCSGE {
> @@ -1394,10 +1705,13 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
> #define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
> #define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
> /* legacy (0x5AEAA55A) */
> +#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
> #define MPI26_FW_HEADER_SIGNATURE0 \
> (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
> #define MPI26_FW_HEADER_SIGNATURE0_3516 \
> (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
> +#define MPI26_FW_HEADER_SIGNATURE0_4008 \
> + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
>
> /*Signature1 field */
> #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
> @@ -1541,6 +1855,13 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
> #define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
> #define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
> #define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
> +#define MPI2_FLASH_REGION_SBR (0x0E)
> +#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
> +#define MPI2_FLASH_REGION_HIIM (0x10)
> +#define MPI2_FLASH_REGION_HIIA (0x11)
> +#define MPI2_FLASH_REGION_CTLR (0x12)
> +#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
> +#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
>
> /*ImageRevision */
> #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
> @@ -1825,6 +2146,8 @@ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
> #define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
> #define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
> #define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
> +#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A)
> +#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B)
> #define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
>
> /* values for the PrimFlags field */
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
> new file mode 100644
> index 0000000..52ea213
> --- /dev/null
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
> @@ -0,0 +1,142 @@
> +/*
> + * Copyright 2012-2015 Avago Technologies. All rights reserved.
> + *
> + *
> + * Name: mpi2_pci.h
> + * Title: MPI PCIe Attached Devices structures and definitions.
> + * Creation Date: October 9, 2012
> + *
> + * mpi2_pci.h Version: 02.00.02
> + *
> + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
> + * prefix are for use only on MPI v2.5 products, and must not be used
> + * with MPI v2.0 products. Unless otherwise noted, names beginning with
> + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
> + *
> + * Version History
> + * ---------------
> + *
> + * Date Version Description
> + * -------- -------- ------------------------------------------------------
> + * 03-16-15 02.00.00 Initial version.
> + * 02-17-16 02.00.01 Removed AHCI support.
> + * Removed SOP support.
> + * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
> + * NVME Encapsulated Request.
> + * --------------------------------------------------------------------------
> + */
> +
> +#ifndef MPI2_PCI_H
> +#define MPI2_PCI_H
> +
> +
> +/*
> + *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event
> + *data and PCIe Configuration pages.
> + */
> +#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH (0x00000010)
> +
> +#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE (0x0000000F)
> +#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000)
> +#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001)
> +#define MPI26_PCIE_DEVINFO_NVME (0x00000003)
> +
> +
> +/****************************************************************************
> +* NVMe Encapsulated message
> +****************************************************************************/
> +
> +/*NVME Encapsulated Request Message */
> +typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
> + U16
> + DevHandle; /*0x00 */
> + U8
> + ChainOffset; /*0x02 */
> + U8
> + Function; /*0x03 */
> + U16
> + EncapsulatedCommandLength; /*0x04 */
> + U8
> + Reserved1; /*0x06 */
> + U8
> + MsgFlags; /*0x07 */
> + U8
> + VP_ID; /*0x08 */
> + U8
> + VF_ID; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U32
> + Reserved3; /*0x0C */
> + U64
> + ErrorResponseBaseAddress; /*0x10 */
> + U16
> + ErrorResponseAllocationLength; /*0x18 */
> + U16
> + Flags; /*0x1A */
> + U32
> + DataLength; /*0x1C */
> + U8
> + NVMe_Command[4]; /*0x20 */
> +
> +} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST,
> + Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t;
> +
> +/*defines for the Flags field */
> +#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP (0x0020)
> +/*Submission Queue Type*/
> +#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK (0x0010)
> +#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000)
> +#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
> +/*Error Response Address Space */
> +#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
> +#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
> +#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008)
> +#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C)
> +/*Data Direction*/
> +#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
> +#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
> +#define MPI26_NVME_FLAGS_WRITE (0x0001)
> +#define MPI26_NVME_FLAGS_READ (0x0002)
> +#define MPI26_NVME_FLAGS_BIDIRECTIONAL (0x0003)
> +
> +
> +/*NVMe Encapuslated Reply Message */
> +typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY {
> + U16
> + DevHandle; /*0x00 */
> + U8
> + MsgLength; /*0x02 */
> + U8
> + Function; /*0x03 */
> + U16
> + EncapsulatedCommandLength; /*0x04 */
> + U8
> + Reserved1; /*0x06 */
> + U8
> + MsgFlags; /*0x07 */
> + U8
> + VP_ID; /*0x08 */
> + U8
> + VF_ID; /*0x09 */
> + U16
> + Reserved2; /*0x0A */
> + U16
> + Reserved3; /*0x0C */
> + U16
> + IOCStatus; /*0x0E */
> + U32
> + IOCLogInfo; /*0x10 */
> + U16
> + ErrorResponseCount; /*0x14 */
> + U16
> + Reserved4; /*0x16 */
> +} MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
> + *PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
> + Mpi26NVMeEncapsulatedErrorReply_t,
> + *pMpi26NVMeEncapsulatedErrorReply_t;
> +
> +
> +#endif
> +
> +
Very odd indentation.
Please reformat to have type and variable on one line.
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@...e.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
Powered by blists - more mailing lists