[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170803005150.9286-4-fcooper@ti.com>
Date: Wed, 2 Aug 2017 19:51:49 -0500
From: Franklin S Cooper Jr <fcooper@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<netdev@...r.kernel.org>, <linux-can@...r.kernel.org>,
<wg@...ndegger.com>, <mkl@...gutronix.de>, <robh+dt@...nel.org>,
<quentin.schulz@...e-electrons.com>,
<dev.kurt@...dijck-laurijssen.be>, <andrew@...n.ch>,
<sergei.shtylyov@...entembedded.com>, <socketcan@...tkopp.net>
CC: Franklin S Cooper Jr <fcooper@...com>
Subject: [PATCH v3 3/4] dt-bindings: can: m_can: Include reference to new fixed transceiver binding
Add information regarding fixed transceiver binding. This is especially
important for MCAN since the IP allows CAN FD mode to run significantly
faster than what most transceivers are capable of.
Signed-off-by: Franklin S Cooper Jr <fcooper@...com>
---
Documentation/devicetree/bindings/net/can/m_can.txt | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 9e33177..0b62f47 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -43,6 +43,11 @@ Required properties:
Please refer to 2.4.1 Message RAM Configuration in
Bosch M_CAN user manual for details.
+Optional properties:
+- fixed-transceiver : Fixed-transceiver subnode describing maximum speed
+ that can be used for CAN/CAN-FD modes. See
+ Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
+ for details.
Example:
SoC dtsi:
m_can1: can@...e8000 {
@@ -64,4 +69,8 @@ Board dts:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_m_can1>;
status = "enabled";
+
+ fixed-transceiver@0 {
+ max-bitrate = <5000000>;
+ };
};
--
2.9.4.dirty
Powered by blists - more mailing lists