| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1501749538.4398.6.camel@mtkswgap22>
Date: Thu, 3 Aug 2017 16:38:58 +0800
From: Sean Wang <sean.wang@...iatek.com>
To: <matthias.bgg@...il.com>
CC: <robh+dt@...nel.org>, <mark.rutland@....com>,
<devicetree@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Ryder Lee <ryder.lee@...iatek.com>
Subject: Re: [PATCH v3] arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2
Hi, Matthias,
Ryder and me tried to make the patch better, so the delivery is made in
v3, including add missing pin state for mmc1 and remove wp-gpio
because the board only has micro-sd slot that can't be adjusted for the
lock manually. And also some cleanups are made for nodes sorted in
alphabetical order. Thanks for Ryder to catch.
Sean
On Thu, 2017-08-03 at 16:29 +0800, sean.wang@...iatek.com wrote:
> From: Sean Wang <sean.wang@...iatek.com>
>
> The bananapi-r2 board has an SD-card controller and built-in
> EMMC storage so enables those devices in the devicetree. Also
> cleanup nodes in alphabetical order in the patch.
>
> Signed-off-by: Matthias Brugger <matthias.bgg@...il.com>
> Signed-off-by: Sean Wang <sean.wang@...iatek.com>
> Signed-off-by: Ryder Lee <ryder.lee@...iatek.com>
> ---
> arch/arm/boot/dts/mt7623.dtsi | 73 ++++++++++++++-------------
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 73 ++++++++++++++++++++-------
> 2 files changed, 94 insertions(+), 52 deletions(-)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 2a877ed..ec8a074 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -91,6 +91,7 @@
> cooling-max-level = <7>;
> clock-frequency = <1300000000>;
> };
> +
> cpu1: cpu@1 {
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> @@ -98,6 +99,7 @@
> operating-points-v2 = <&cpu_opp_table>;
> clock-frequency = <1300000000>;
> };
> +
> cpu2: cpu@2 {
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> @@ -105,6 +107,7 @@
> operating-points-v2 = <&cpu_opp_table>;
> clock-frequency = <1300000000>;
> };
> +
> cpu3: cpu@3 {
> device_type = "cpu";
> compatible = "arm,cortex-a7";
> @@ -172,10 +175,12 @@
> trip = <&cpu_passive>;
> cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> +
> map1 {
> trip = <&cpu_active>;
> cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> +
> map2 {
> trip = <&cpu_hot>;
> cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> @@ -481,6 +486,31 @@
> nvmem-cell-names = "calibration-data";
> };
>
> + nandc: nfi@...0d000 {
> + compatible = "mediatek,mt7623-nfc",
> + "mediatek,mt2701-nfc";
> + reg = <0 0x1100d000 0 0x1000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> + clocks = <&pericfg CLK_PERI_NFI>,
> + <&pericfg CLK_PERI_NFI_PAD>;
> + clock-names = "nfi_clk", "pad_clk";
> + status = "disabled";
> + ecc-engine = <&bch>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + bch: ecc@...0e000 {
> + compatible = "mediatek,mt7623-ecc",
> + "mediatek,mt2701-ecc";
> + reg = <0 0x1100e000 0 0x1000>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_NFI_ECC>;
> + clock-names = "nfiecc_clk";
> + status = "disabled";
> + };
> +
> spi1: spi@...16000 {
> compatible = "mediatek,mt7623-spi",
> "mediatek,mt2701-spi";
> @@ -509,31 +539,6 @@
> status = "disabled";
> };
>
> - nandc: nfi@...0d000 {
> - compatible = "mediatek,mt7623-nfc",
> - "mediatek,mt2701-nfc";
> - reg = <0 0x1100d000 0 0x1000>;
> - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
> - clocks = <&pericfg CLK_PERI_NFI>,
> - <&pericfg CLK_PERI_NFI_PAD>;
> - clock-names = "nfi_clk", "pad_clk";
> - status = "disabled";
> - ecc-engine = <&bch>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - bch: ecc@...0e000 {
> - compatible = "mediatek,mt7623-ecc",
> - "mediatek,mt2701-ecc";
> - reg = <0 0x1100e000 0 0x1000>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&pericfg CLK_PERI_NFI_ECC>;
> - clock-names = "nfiecc_clk";
> - status = "disabled";
> - };
> -
> afe: audio-controller@...20000 {
> compatible = "mediatek,mt7623-audio",
> "mediatek,mt2701-audio";
> @@ -655,6 +660,15 @@
> status = "disabled";
> };
>
> + hifsys: syscon@...00000 {
> + compatible = "mediatek,mt7623-hifsys",
> + "mediatek,mt2701-hifsys",
> + "syscon";
> + reg = <0 0x1a000000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> usb1: usb@...c0000 {
> compatible = "mediatek,mt7623-xhci",
> "mediatek,mt8173-xhci";
> @@ -733,15 +747,6 @@
> };
> };
>
> - hifsys: syscon@...00000 {
> - compatible = "mediatek,mt7623-hifsys",
> - "mediatek,mt2701-hifsys",
> - "syscon";
> - reg = <0 0x1a000000 0 0x1000>;
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - };
> -
> ethsys: syscon@...00000 {
> compatible = "mediatek,mt7623-ethsys",
> "mediatek,mt2701-ethsys",
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 9f3e6dd..0aa1c69 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -179,6 +179,32 @@
> status = "okay";
> };
>
> +&mmc0 {
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_pins_default>;
> + pinctrl-1 = <&mmc0_pins_uhs>;
> + status = "okay";
> + bus-width = <8>;
> + max-frequency = <50000000>;
> + cap-mmc-highspeed;
> + vmmc-supply = <&mt6323_vemc3v3_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> + non-removable;
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc1_pins_default>;
> + pinctrl-1 = <&mmc1_pins_uhs>;
> + status = "okay";
> + bus-width = <4>;
> + max-frequency = <50000000>;
> + cap-sd-highspeed;
> + cd-gpios = <&pio 261 0>;
> + vmmc-supply = <&mt6323_vmch_reg>;
> + vqmmc-supply = <&mt6323_vio18_reg>;
> +};
> +
> &pio {
> cir_pins_a:cir@0 {
> pins_cir {
> @@ -314,6 +340,17 @@
> bias-pull-down;
> drive-strength = <MTK_DRIVE_4mA>;
> };
> +
> + pins_wp {
> + pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins_insert {
> + pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
> + bias-pull-up;
> + };
> };
>
> mmc1_pins_uhs: mmc1 {
> @@ -335,16 +372,6 @@
> };
> };
>
> - spi0_pins_a: spi@0 {
> - pins_spi {
> - pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
> - <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
> - <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
> - <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
> - bias-disable;
> - };
> - };
> -
> pwm_pins_a: pwm@0 {
> pins_pwm {
> pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
> @@ -355,6 +382,16 @@
> };
> };
>
> + spi0_pins_a: spi@0 {
> + pins_spi {
> + pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
> + <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
> + <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
> + <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
> + bias-disable;
> + };
> + };
> +
> uart0_pins_a: uart@0 {
> pins_dat {
> pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
> @@ -414,14 +451,6 @@
> status = "disabled";
> };
>
> -&u3phy1 {
> - status = "okay";
> -};
> -
> -&u3phy2 {
> - status = "okay";
> -};
> -
> &uart1 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart1_pins_a>;
> @@ -441,3 +470,11 @@
> vusb33-supply = <&mt6323_vusb_reg>;
> status = "okay";
> };
> +
> +&u3phy1 {
> + status = "okay";
> +};
> +
> +&u3phy2 {
> + status = "okay";
> +};
Powered by blists - more mailing lists