| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1501754483-10392-1-git-send-email-chunfeng.yun@mediatek.com>
Date: Thu, 3 Aug 2017 18:01:04 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Kishon Vijay Abraham I <kishon@...com>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Rob Herring <robh+dt@...nel.org>,
"Mark Rutland" <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Ryder Lee <ryder.lee@...iatek.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-usb@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<devicetree@...r.kernel.org>
Subject: [PATCH 1/4] phy: phy-mt65xx-usb3: add PCIe PHY support
From: Ryder Lee <ryder.lee@...iatek.com>
This patch adds PCIe PHY setting part.
Change-Id: I112cbcdafd3deecf2c0ad17bafc8c784e1730ec4
Signed-off-by: Ryder Lee <ryder.lee@...iatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
drivers/phy/phy-mt65xx-usb3.c | 220 +++++++++++++++++++++++++++++++++++++----
1 file changed, 202 insertions(+), 18 deletions(-)
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index 59b110f..8ba6905 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -29,7 +29,7 @@
#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
/* u2 phy bank */
#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
-/* u3 phy banks */
+/* u3/pcie phy banks */
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
#define SSUSB_SIFSLV_V1_U3PHYA 0x200
@@ -99,6 +99,23 @@
#define P2C_RG_SESSEND BIT(4)
#define P2C_RG_AVALID BIT(2)
+#define U3P_U3_CHIP_GPIO_CTLD 0x0c
+#define P3C_REG_IP_SW_RST BIT(31)
+#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
+#define P3C_FORCE_IP_SW_RST BIT(29)
+
+#define U3P_U3_CHIP_GPIO_CTLE 0x10
+#define P3C_RG_SWRST_U3_PHYD BIT(25)
+#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
+
+#define U3P_U3_PHYA_REG0 0x000
+#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
+#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
+
+#define U3P_U3_PHYA_REG1 0x004
+#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
+#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
+
#define U3P_U3_PHYA_REG6 0x018
#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
@@ -108,9 +125,40 @@
#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
#define U3P_U3_PHYA_DA_REG0 0x100
+#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
+#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
+#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
+#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12)
#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
+#define U3P_U3_PHYA_DA_REG4 0x108
+#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
+#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
+#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6)
+
+#define U3P_U3_PHYA_DA_REG5 0x10c
+#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
+#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28)
+#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
+#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12)
+
+#define U3P_U3_PHYA_DA_REG6 0x110
+#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG7 0x114
+#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG20 0x13c
+#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
+#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG25 0x148
+#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
+#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
+
#define U3P_U3_PHYD_LFPS1 0x00c
#define P3D_RG_FWAKE_TH GENMASK(21, 16)
#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
@@ -322,7 +370,7 @@ static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy,
dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
}
-static void phy_instance_init(struct mt65xx_u3phy *u3phy,
+static void u2_phy_instance_init(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
@@ -384,7 +432,7 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
}
-static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
+static void u2_phy_instance_power_on(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
@@ -420,7 +468,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
}
-static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
+static void u2_phy_instance_power_off(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
@@ -458,7 +506,7 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
}
-static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
+static void u2_phy_instance_exit(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
@@ -477,21 +525,133 @@ static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
}
}
+static void pcie_phy_instance_init(struct mt65xx_u3phy *u3phy,
+ struct mt65xx_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ if (u3phy->pdata->version != MT_PHY_V1)
+ return;
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+ tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
+ tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+ /* ref clk drive */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG1);
+ tmp &= ~P3A_RG_CLKDRV_AMP;
+ tmp |= P3A_RG_CLKDRV_AMP_VAL(0x4);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG1);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ tmp &= ~P3A_RG_CLKDRV_OFF;
+ tmp |= P3A_RG_CLKDRV_OFF_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+
+ /* SSC delta -5000ppm */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+ tmp &= ~P3A_RG_PLL_DELTA1_PE2H;
+ tmp |= P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+ tmp &= ~P3A_RG_PLL_DELTA_PE2H;
+ tmp |= P3A_RG_PLL_DELTA_PE2H_VAL(0x36);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+
+ /* change pll BW 0.6M */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+ tmp &= ~(P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H);
+ tmp |= P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+ tmp &= ~(P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H);
+ tmp |= P3A_RG_PLL_BC_PE2H_VAL(0x3);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+ tmp &= ~P3A_RG_PLL_IR_PE2H;
+ tmp |= P3A_RG_PLL_IR_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+ tmp &= ~P3A_RG_PLL_BP_PE2H;
+ tmp |= P3A_RG_PLL_BP_PE2H_VAL(0xa);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+
+ /* Tx Detect Rx Timing: 10us -> 5us */
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+ tmp &= ~P3D_RG_RXDET_STB2_SET;
+ tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+ tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+ tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+ /* wait for PCIe subsys register to active */
+ usleep_range(2500, 3000);
+ dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void pcie_phy_instance_power_on(struct mt65xx_u3phy *u3phy,
+ struct mt65xx_phy_instance *instance)
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN |
+ P3C_REG_IP_SW_RST);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp &= ~(P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void pcie_phy_instance_power_off(struct mt65xx_u3phy *u3phy,
+ struct mt65xx_phy_instance *instance)
+
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp |= P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp |= P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy,
struct mt65xx_phy_instance *instance)
{
struct u2phy_banks *u2_banks = &instance->u2_banks;
struct u3phy_banks *u3_banks = &instance->u3_banks;
- if (instance->type == PHY_TYPE_USB2) {
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
u2_banks->misc = NULL;
u2_banks->fmreg = u3phy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
- } else if (instance->type == PHY_TYPE_USB3) {
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
u3_banks->spllc = u3phy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
u3_banks->chip = NULL;
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+ break;
+ default:
+ dev_err(u3phy->dev, "incompatible PHY type\n");
+ return;
}
}
@@ -501,15 +661,22 @@ static void phy_v2_banks_init(struct mt65xx_u3phy *u3phy,
struct u2phy_banks *u2_banks = &instance->u2_banks;
struct u3phy_banks *u3_banks = &instance->u3_banks;
- if (instance->type == PHY_TYPE_USB2) {
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
- } else if (instance->type == PHY_TYPE_USB3) {
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+ break;
+ default:
+ dev_err(u3phy->dev, "incompatible PHY type\n");
+ return;
}
}
@@ -531,10 +698,20 @@ static int mt65xx_phy_init(struct phy *phy)
return ret;
}
- if (instance->type == PHY_TYPE_USB2)
- phy_instance_init(u3phy, instance);
- else
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_phy_instance_init(u3phy, instance);
+ break;
+ case PHY_TYPE_USB3:
u3_phy_instance_init(u3phy, instance);
+ break;
+ case PHY_TYPE_PCIE:
+ pcie_phy_instance_init(u3phy, instance);
+ break;
+ default:
+ dev_err(u3phy->dev, "incompatible PHY type\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -545,9 +722,12 @@ static int mt65xx_phy_power_on(struct phy *phy)
struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
if (instance->type == PHY_TYPE_USB2) {
- phy_instance_power_on(u3phy, instance);
+ u2_phy_instance_power_on(u3phy, instance);
hs_slew_rate_calibrate(u3phy, instance);
+ } else if (instance->type == PHY_TYPE_PCIE) {
+ pcie_phy_instance_power_on(u3phy, instance);
}
+
return 0;
}
@@ -557,7 +737,9 @@ static int mt65xx_phy_power_off(struct phy *phy)
struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
if (instance->type == PHY_TYPE_USB2)
- phy_instance_power_off(u3phy, instance);
+ u2_phy_instance_power_off(u3phy, instance);
+ else if (instance->type == PHY_TYPE_PCIE)
+ pcie_phy_instance_power_off(u3phy, instance);
return 0;
}
@@ -568,7 +750,7 @@ static int mt65xx_phy_exit(struct phy *phy)
struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
if (instance->type == PHY_TYPE_USB2)
- phy_instance_exit(u3phy, instance);
+ u2_phy_instance_exit(u3phy, instance);
clk_disable_unprepare(instance->ref_clk);
clk_disable_unprepare(u3phy->u3phya_ref);
@@ -601,7 +783,8 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
instance->type = args->args[0];
if (!(instance->type == PHY_TYPE_USB2 ||
- instance->type == PHY_TYPE_USB3)) {
+ instance->type == PHY_TYPE_USB3 ||
+ instance->type == PHY_TYPE_PCIE)) {
dev_err(dev, "unsupported device type: %d\n", instance->type);
return ERR_PTR(-EINVAL);
}
@@ -626,7 +809,7 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
.owner = THIS_MODULE,
};
-static const struct mt65xx_phy_pdata mt2701_pdata = {
+static const struct mt65xx_phy_pdata tphy_v1_pdata = {
.avoid_rx_sen_degradation = false,
.version = MT_PHY_V1,
};
@@ -642,9 +825,10 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
};
static const struct of_device_id mt65xx_u3phy_id_table[] = {
- { .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata },
+ { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
{ .compatible = "mediatek,mt2712-u3phy", .data = &mt2712_pdata },
{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+ { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
{ },
};
MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
--
1.7.9.5
Powered by blists - more mailing lists