linux-kernel - [PATCH v3 5/6] ARM: dts: da850-lego-ev3: Add node for LCD display

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1501799630-1650-6-git-send-email-david@lechnology.com>
Date:   Thu,  3 Aug 2017 17:33:49 -0500
From:   David Lechner <david@...hnology.com>
To:     dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc:     David Lechner <david@...hnology.com>,
        Noralf Trønnes <noralf@...nnes.org>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...ux.ie>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Sekhar Nori <nsekhar@...com>,
        Kevin Hilman <khilman@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 5/6] ARM: dts: da850-lego-ev3: Add node for LCD display

This adds a new node for the LEGO MINDSTORMS EV3 LCD display.

Signed-off-by: David Lechner <david@...hnology.com>
---
 arch/arm/boot/dts/da850-lego-ev3.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 45983c0..249b317 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -249,6 +249,15 @@
 			0x4c 0x00000080 0x000000f0
 		>;
 	};
+
+	ev3_lcd_pins: pinmux_lcd {
+		pinctrl-single,bits = <
+			/* SIMO, GP2[11], GP2[12], CLK */
+			0x14 0x00188100 0x00ffff00
+			/* GP5[0] */
+			0x30 0x80000000 0xf0000000
+		>;
+	};
 };
 
 &pinconf {
@@ -357,6 +366,21 @@
 	};
 };
 
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&ev3_lcd_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+
+	display@0{
+		compatible = "lego,ev3-lcd";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &ehrpwm0 {
 	status = "okay";
 };
-- 
2.7.4