[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170806140005.7135-1-ludovic.desroches@o2linux.fr>
Date: Sun, 6 Aug 2017 16:00:05 +0200
From: Ludovic Desroches <ludovic.desroches@...inux.fr>
To: linux-gpio@...r.kernel.org, linux-doc@...r.kernel.org
Cc: linus.walleij@...aro.org, corbet@....net,
linux-kernel@...r.kernel.org,
Ludovic Desroches <ludovic.desroches@...inux.fr>
Subject: [PATCH] pinctrl: generic: update references to Documentation/pinctrl.txt
Update deprecated references to Documentation/pinctrl.txt since it has been
moved to Documentation/driver-api/pinctl.rst.
Signed-off-by: Ludovic Desroches <ludovic.desroches@...inux.fr>
Fixes: 5a9b73832e9e ("pinctrl.txt: move it to the driver-api book")
---
Hi,
Last time I wanted to have a look at the pinctrl documentation, I didn't find
it, I had to browse git logs to find the new place.
I don't know if it is better to update all the places where
Documentation/pinctrl.txt was mentionned at once or if I have to split this
patch.
Other variant of this patch can be to reintroduce a Documentation/pinctrl.txt
file indicating the new location as it is done for several files already.
Please tell me your preference and I'll update the patch according to.
Regards
Ludovic
Documentation/gpio/gpio-legacy.txt | 2 +-
MAINTAINERS | 2 +-
include/linux/device.h | 2 +-
include/linux/pinctrl/pinconf-generic.h | 4 ++--
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt
index b34fd94f7089..5eacc147ea87 100644
--- a/Documentation/gpio/gpio-legacy.txt
+++ b/Documentation/gpio/gpio-legacy.txt
@@ -459,7 +459,7 @@ pin controller?
This is done by registering "ranges" of pins, which are essentially
cross-reference tables. These are described in
-Documentation/pinctrl.txt
+Documentation/driver-api/pinctl.rst
While the pin allocation is totally managed by the pinctrl subsystem,
gpio (under gpiolib) is still maintained by gpio drivers. It may happen
diff --git a/MAINTAINERS b/MAINTAINERS
index 672b5d5402f0..3a47d9facf0a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10450,7 +10450,7 @@ L: linux-gpio@...r.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/
-F: Documentation/pinctrl.txt
+F: Documentation/driver-api/pinctl.rst
F: drivers/pinctrl/
F: include/linux/pinctrl/
diff --git a/include/linux/device.h b/include/linux/device.h
index c29dd5ec7f6a..5db26b9c0fcc 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -843,7 +843,7 @@ struct dev_links_info {
* hibernation, system resume and during runtime PM transitions
* along with subsystem-level and driver-level callbacks.
* @pins: For device pin management.
- * See Documentation/pinctrl.txt for details.
+ * See Documentation/driver-api/pinctl.rst for details.
* @msi_list: Hosts MSI descriptors
* @msi_domain: The generic MSI domain this device is using.
* @numa_node: NUMA node this device is close to.
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 231d3075815a..e91d1b6a260d 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -81,8 +81,8 @@
* it.
* @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a
* value on the line. Use argument 1 to indicate high level, argument 0 to
- * indicate low level. (Please see Documentation/pinctrl.txt, section
- * "GPIO mode pitfalls" for a discussion around this parameter.)
+ * indicate low level. (Please see Documentation/driver-api/pinctl.rst,
+ * section "GPIO mode pitfalls" for a discussion around this parameter.)
* @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
* supplies, the argument to this parameter (on a custom format) tells
* the driver which alternative power source to use.
--
2.13.3
Powered by blists - more mailing lists