[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAEKpxBnPHFt3wHBnPSrkbsgxf2tHVfFryGM0ywMNX0v8bJ5_ZA@mail.gmail.com>
Date: Mon, 7 Aug 2017 08:20:27 +0200
From: Code Kipper <codekipper@...il.com>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Maxime Ripard <maxime.ripard@...e-electrons.com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Linux-ALSA <alsa-devel@...a-project.org>,
"Andrea Venturi (pers)" <be17068@...rbole.bo.it>
Subject: Re: [linux-sunxi] [PATCH v3 02/12] ASoC: sun4i-i2s: Add clkdiv
offsets to quirks
On 1 August 2017 at 04:55, Chen-Yu Tsai <wens@...e.org> wrote:
> On Sat, Jul 29, 2017 at 10:17 PM, <codekipper@...il.com> wrote:
>> From: Marcus Cooper <codekipper@...il.com>
>>
>> The BCLKDIV and MCLKDIV found on newer SoCs start from an offset of 1.
>> Add the functionality to adjust the division values according to the
>> needs to the device being used.
>>
>> Signed-off-by: Marcus Cooper <codekipper@...il.com>
>> ---
>> sound/soc/sunxi/sun4i-i2s.c | 8 ++++++--
>> 1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
>> index d7ee7a443e4e..1d538de4e4d0 100644
>> --- a/sound/soc/sunxi/sun4i-i2s.c
>> +++ b/sound/soc/sunxi/sun4i-i2s.c
>> @@ -94,9 +94,13 @@
>> * struct sun4i_i2s_quirks - Differences between SoC variants.
>> *
>> * @has_reset: SoC needs reset deasserted.
>> + * @mclk_offset: Value by which mclkdiv needs to be adjusted.
>> + * @bclk_offset: Value by which bclkdiv needs to be adjusted.
>> */
>> struct sun4i_i2s_quirks {
>> bool has_reset;
>> + unsigned int mclk_offset;
>> + unsigned int bclk_offset;
>> };
>>
>> struct sun4i_i2s {
>> @@ -149,7 +153,7 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
>> const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
>>
>> if (bdiv->div == div)
>> - return bdiv->val;
>> + return bdiv->val + i2s->variant->bclk_offset;
>
> The offset should best be applied when the value is written to the register,
> in sun4i_i2s_set_clk_rate(). sun4i_i2s_get_*_div() should do what the name
> says, that is calculate a divider based on the parameters it is given.
>
ACK,
Thanks for the review,
CK
> Regards
> ChenYu
>
>> }
>>
>> return -EINVAL;
>> @@ -167,7 +171,7 @@ static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
>> const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
>>
>> if (mdiv->div == div)
>> - return mdiv->val;
>> + return mdiv->val + i2s->variant->mclk_offset;
>> }
>>
>> return -EINVAL;
>> --
>> 2.13.3
>>
>> --
>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@...glegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
Powered by blists - more mailing lists