linux-kernel - Re: [PATCH 1/2 v2] backlight: gpio: Convert to use GPIO descriptor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170807161208.iqolstul43562e5q@dell>
Date:   Mon, 7 Aug 2017 17:12:08 +0100
From:   Lee Jones <lee.jones@...aro.org>
To:     Linus Walleij <linus.walleij@...aro.org>
Cc:     Daniel Thompson <daniel.thompson@...aro.org>,
        Jingoo Han <jingoohan1@...il.com>,
        linux-kernel@...r.kernel.org,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>
Subject: Re: [PATCH 1/2 v2] backlight: gpio: Convert to use GPIO descriptor

On Tue, 30 May 2017, Linus Walleij wrote:

> This driver is predominantly used by device tree systems, all
> of which can deal with modern GPIO descriptors. The legacy
> GPIO API is only used by one SH board so make the GPIO
> descriptor the default way to deal with it.
> 
> As an intended side effect we do not need to look around in
> the device tree for the inversion flag since the GPIO
> descriptors will intrinsically deal with this.
> 
> Acked-by: Daniel Thompson <daniel.thompson@...aro.org>
> Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> ChangeLog v1->v2:
> - Assign flags value using the ternary operator.
> ---
>  drivers/video/backlight/gpio_backlight.c | 71 +++++++++++++++++++-------------
>  1 file changed, 43 insertions(+), 28 deletions(-)

Applied, thanks.

> diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
> index 18134416b154..5ffaff1e4142 100644
> --- a/drivers/video/backlight/gpio_backlight.c
> +++ b/drivers/video/backlight/gpio_backlight.c
> @@ -9,7 +9,8 @@
>  #include <linux/backlight.h>
>  #include <linux/err.h>
>  #include <linux/fb.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio.h> /* Only for legacy support */
> +#include <linux/gpio/consumer.h>
>  #include <linux/init.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> @@ -23,7 +24,7 @@ struct gpio_backlight {
>  	struct device *dev;
>  	struct device *fbdev;
>  
> -	int gpio;
> +	struct gpio_desc *gpiod;
>  	int active;
>  	int def_value;
>  };
> @@ -38,8 +39,8 @@ static int gpio_backlight_update_status(struct backlight_device *bl)
>  	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
>  		brightness = 0;
>  
> -	gpio_set_value_cansleep(gbl->gpio,
> -				brightness ? gbl->active : !gbl->active);
> +	gpiod_set_value_cansleep(gbl->gpiod,
> +				 brightness ? gbl->active : !gbl->active);
>  
>  	return 0;
>  }
> @@ -61,23 +62,27 @@ static const struct backlight_ops gpio_backlight_ops = {
>  static int gpio_backlight_probe_dt(struct platform_device *pdev,
>  				   struct gpio_backlight *gbl)
>  {
> -	struct device_node *np = pdev->dev.of_node;
> -	enum of_gpio_flags gpio_flags;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	enum gpiod_flags flags;
> +	int ret;
> +
> +	gbl->def_value = of_property_read_bool(np, "default-on");
> +	flags = gbl->def_value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
> +	/* GPIO descriptors keep track of inversion */
> +	gbl->active = 1;
>  
> -	gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
> +	gbl->gpiod = devm_gpiod_get(dev, NULL, flags);
> +	if (IS_ERR(gbl->gpiod)) {
> +		ret = PTR_ERR(gbl->gpiod);
>  
> -	if (!gpio_is_valid(gbl->gpio)) {
> -		if (gbl->gpio != -EPROBE_DEFER) {
> -			dev_err(&pdev->dev,
> +		if (ret != -EPROBE_DEFER) {
> +			dev_err(dev,
>  				"Error: The gpios parameter is missing or invalid.\n");
>  		}
> -		return gbl->gpio;
> +		return ret;
>  	}
>  
> -	gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
> -
> -	gbl->def_value = of_property_read_bool(np, "default-on");
> -
>  	return 0;
>  }
>  
> @@ -89,7 +94,6 @@ static int gpio_backlight_probe(struct platform_device *pdev)
>  	struct backlight_device *bl;
>  	struct gpio_backlight *gbl;
>  	struct device_node *np = pdev->dev.of_node;
> -	unsigned long flags = GPIOF_DIR_OUT;
>  	int ret;
>  
>  	if (!pdata && !np) {
> @@ -109,22 +113,33 @@ static int gpio_backlight_probe(struct platform_device *pdev)
>  		if (ret)
>  			return ret;
>  	} else {
> +		/*
> +		 * Legacy platform data GPIO retrieveal. Do not expand
> +		 * the use of this code path, currently only used by one
> +		 * SH board.
> +		 */
> +		unsigned long flags = GPIOF_DIR_OUT;
> +
>  		gbl->fbdev = pdata->fbdev;
> -		gbl->gpio = pdata->gpio;
>  		gbl->active = pdata->active_low ? 0 : 1;
>  		gbl->def_value = pdata->def_value;
> -	}
> -
> -	if (gbl->active)
> -		flags |= gbl->def_value ? GPIOF_INIT_HIGH : GPIOF_INIT_LOW;
> -	else
> -		flags |= gbl->def_value ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
>  
> -	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, flags,
> -				    pdata ? pdata->name : "backlight");
> -	if (ret < 0) {
> -		dev_err(&pdev->dev, "unable to request GPIO\n");
> -		return ret;
> +		if (gbl->active)
> +			flags |= gbl->def_value ?
> +				GPIOF_INIT_HIGH : GPIOF_INIT_LOW;
> +		else
> +			flags |= gbl->def_value ?
> +				GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
> +
> +		ret = devm_gpio_request_one(gbl->dev, pdata->gpio, flags,
> +					    pdata ? pdata->name : "backlight");
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "unable to request GPIO\n");
> +			return ret;
> +		}
> +		gbl->gpiod = gpio_to_desc(pdata->gpio);
> +		if (!gbl->gpiod)
> +			return -EINVAL;
>  	}
>  
>  	memset(&props, 0, sizeof(props));

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog