linux-kernel - Re: [PATCH 00/14] mmc: meson-gx: driver fixups and upgrade

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 07 Aug 2017 14:44:00 -0700
From:   Kevin Hilman <khilman@...libre.com>
To:     Jerome Brunet <jbrunet@...libre.com>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>,
        Carlo Caione <carlo@...one.org>, linux-mmc@...r.kernel.org,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 00/14] mmc: meson-gx: driver fixups and upgrade

Jerome Brunet <jbrunet@...libre.com> writes:

> On Fri, 2017-08-04 at 19:43 +0200, Jerome Brunet wrote:
>> The patchset features several bugfixes, rework and upgrade for the
>> meson-gx MMC driver.
>> 
>> The main goal is to improve readability and enable new high speed
>> modes, such as eMMC DDR52 and sdcard UHS modes up to SDR50 (100Mhz)
>> 
>> While full speed SDR104 is stable with most cards, a few seems to
>> require an even more precise tuning. For this, we'll probably have
>> to implement per-line delay calibration.
>> 
>> This series has been tested on gxbb-p200, gxbb-nanopi-k2 and
>> gxl-s905x-libretech
>> 
>
> Ulf, Kevin,
>
> Please ignore this series. I'll resend it soon
>
> I've discovered new things around the tuning capabilities of the SoC.
> I'll probably rework the tuning function again.
>
> Sorry for the noise

No worries, I had a couple very minor comments on some individual
patches. Other than that, LGTM.

Feel free to add:

Reviewed-by: Kevin Hilman <khilman@...libre.com>

to anything that doesn't need major rework.

Also, You might want to separate out the fixups/cleanups from the
voltage/clock changes stuff.

Kevin