| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ef9ba15a-b3e3-6007-e4de-ccc9a0566180@rock-chips.com>
Date: Wed, 9 Aug 2017 11:47:44 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: Li Wei <liwei213@...wei.com>, ulf.hansson@...aro.org,
jh80.chung@...sung.com, wsa+renesas@...g-engineering.com,
hkallweit1@...il.com, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: adrian.hunter@...el.com, shawn.lin@...k-chips.com,
guodong.xu@...aro.org
Subject: Re: [PATCH v9 2/2] mmc: dw_mmc-k3: add sd support for hi3660
On 2017/8/9 11:25, Li Wei wrote:
> Add sd card support for hi3660 soc
>
> Signed-off-by: Li Wei <liwei213@...wei.com>
> Signed-off-by: Chen Jun <chenjun14@...wei.com>
>
I did some comment for your v6 but probably you miss them.
And it's still incorrect for your changelog.....
> --------------------------------------------------
> Major changes in v3:
> - solve review comments from Heiner Kallweit.
> *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
> *use usleep_range() replace udelay() and mdelay().
>
> Major changes in v4:
> - solve review comments from Jaehoon Chung.
> *move common register for dwmmc controller to dwmmc header file.
> *modify definitions type of some register variables.
> *get rid of the magic numbers.
>
> Major changes in v5:
> - further improve coding style.
>
> Major changes in v6:
> - solve review comments for Jaehoon Chung.
> *modify dw_mci_hi3660_set_ios() to static.
> *fix the comment style.
>
> Major changes in v7:
> - solve review comments for John Stultz.
> *remove reset code in dw_mmc-k3.c,use reset in core mmc.
>
> Major changes in v8:
> - modify patch v7 name and dependency order.
>
> Major changes in v9:
> - solve review comments for Ulf Hansson.
> *use mmc_regulator_set_vqmmc() instead of regulator_set_voltage().
> ---
should be here...
> drivers/mmc/host/dw_mmc-k3.c | 301 +++++++++++++++++++++++++++++++++++++++++++
> drivers/mmc/host/dw_mmc.h | 2 +
> 2 files changed, 303 insertions(+)
>
> diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
> index e38fb0020bb1..f6910bed55ef 100644
> --- a/drivers/mmc/host/dw_mmc-k3.c
> +++ b/drivers/mmc/host/dw_mmc-k3.c
> @@ -8,6 +8,8 @@
> * (at your option) any later version.
> */
>
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/mfd/syscon.h>
> #include <linux/mmc/host.h>
> @@ -28,7 +30,38 @@
> #define AO_SCTRL_SEL18 BIT(10)
> #define AO_SCTRL_CTRL3 0x40C
>
> +#define DWMMC_SDIO_ID 2
> +
> +#define SOC_SCTRL_SCPERCTRL5 (0x314)
> +#define SDCARD_IO_SEL18 BIT(2)
> +
> +#define SDCARD_RD_THRESHOLD (512)
> +
> +#define GENCLK_DIV (7)
> +
> +#define GPIO_CLK_ENABLE BIT(16)
> +#define GPIO_CLK_DIV_MASK GENMASK(11, 8)
> +#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13)
> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16)
> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21)
> +#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26)
> +
> +#define TIMING_MODE 3
> +#define TIMING_CFG_NUM 10
> +
> +#define PULL_DOWN BIT(1)
> +#define PULL_UP BIT(0)
> +
> +#define NUM_PHASES (40)
> +
> +#define ENABLE_SHIFT_MIN_SMPL (4)
> +#define ENABLE_SHIFT_MAX_SMPL (12)
> +#define USE_DLY_MIN_SMPL (11)
> +#define USE_DLY_MAX_SMPL (14)
> +
I said some of this macro newly added aren't
used anywhere.
> struct k3_priv {
> + int ctrl_id;
> + u32 cur_speed;
> struct regmap *reg;
> };
>
> @@ -38,6 +71,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
> 0
> };
>
> +struct hs_timing {
> + u32 drv_phase;
> + u32 smpl_dly;
> + u32 smpl_phase_max;
> + u32 smpl_phase_min;
> +};
> +
> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
> + { /* reserved */ },
> + { /* SD */
> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */
> + {6, 0, 4, 4,}, /* 1: MMC_HS */
> + {6, 0, 3, 3,}, /* 2: SD_HS */
> + {6, 0, 15, 15,}, /* 3: SDR12 */
> + {6, 0, 2, 2,}, /* 4: SDR25 */
> + {4, 0, 11, 0,}, /* 5: SDR50 */
> + {6, 4, 15, 0,}, /* 6: SDR104 */
> + {0}, /* 7: DDR50 */
> + {0}, /* 8: DDR52 */
> + {0}, /* 9: HS200 */
> + },
> + { /* SDIO */
> + {7, 0, 15, 15,}, /* 0: LEGACY 400k */
> + {0}, /* 1: MMC_HS */
> + {6, 0, 15, 15,}, /* 2: SD_HS */
> + {6, 0, 15, 15,}, /* 3: SDR12 */
> + {6, 0, 0, 0,}, /* 4: SDR25 */
> + {4, 0, 12, 0,}, /* 5: SDR50 */
> + {5, 4, 15, 0,}, /* 6: SDR104 */
> + {0}, /* 7: DDR50 */
> + {0}, /* 8: DDR52 */
> + {0}, /* 9: HS200 */
> + }
> +};
> +
Does it work for hard-coding the delay timing? All the different boards
with different cards work fine?
And tuning process is also work for SDR50 although it's optional. So how
would that work for your case?
> static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
> {
> int ret;
> @@ -66,6 +134,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
> if (IS_ERR(priv->reg))
> priv->reg = NULL;
>
> + priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
> + if (priv->ctrl_id < 0)
> + priv->ctrl_id = 0;
> +
> host->priv = priv;
> return 0;
> }
> @@ -144,7 +216,236 @@ static const struct dw_mci_drv_data hi6220_data = {
> .execute_tuning = dw_mci_hi6220_execute_tuning,
> };
>
> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
> + int smpl_phase)
> +{
> + u32 drv_phase;
> + u32 smpl_dly;
> + u32 use_smpl_dly = 0;
> + u32 enable_shift = 0;
> + u32 reg_value;
> + int ctrl_id;
> + struct k3_priv *priv;
> +
> + priv = host->priv;
> + ctrl_id = priv->ctrl_id;
> +
> + drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
> + smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly;
> + if (smpl_phase == -1)
> + smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
> + hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
> +
> + switch (timing) {
> + case MMC_TIMING_UHS_SDR104:
> + if (smpl_phase >= USE_DLY_MIN_SMPL &&
> + smpl_phase <= USE_DLY_MAX_SMPL)
> + use_smpl_dly = 1;
> + /* fallthrough */
> + case MMC_TIMING_UHS_SDR50:
> + if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
> + smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
> + enable_shift = 1;
> + break;
> + }
> +
> + mci_writel(host, GPIO, 0x0);
> + usleep_range(5, 10);
> +
> + reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
> + FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
> + mci_writel(host, UHS_REG_EXT, reg_value);
> +
> + mci_writel(host, ENABLE_SHIFT, enable_shift);
> +
> + reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
> + FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
> + mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
> +
> + /* We should delay 1ms wait for timing setting finished. */
> + usleep_range(1000, 2000);
> +}
> +
> +static int dw_mci_hi3660_init(struct dw_mci *host)
> +{
> + mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
> + SDMMC_CARD_RD_THR_EN));
> +
> + dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
> + host->bus_hz /= (GENCLK_DIV + 1);
> +
> + return 0;
> +}
> +
> +static int dw_mci_set_sel18(struct dw_mci *host, bool set)
> +{
> + int ret;
> + unsigned int val;
> + struct k3_priv *priv;
> +
> + priv = host->priv;
> +
> + val = set ? SDCARD_IO_SEL18 : 0;
> + ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
> + SDCARD_IO_SEL18, val);
> + if (ret) {
> + dev_err(host->dev, "sel18 %u error\n", val);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
> +{
> + int ret;
> + unsigned long wanted;
> + unsigned long actual;
> + struct k3_priv *priv = host->priv;
> +
> + if (!ios->clock || ios->clock == priv->cur_speed)
> + return;
> +
> + wanted = ios->clock * (GENCLK_DIV + 1);
> + ret = clk_set_rate(host->ciu_clk, wanted);
> + if (ret) {
> + dev_err(host->dev, "failed to set rate %luHz\n", wanted);
> + return;
> + }
> + actual = clk_get_rate(host->ciu_clk);
> +
> + dw_mci_hs_set_timing(host, ios->timing, -1);
> + host->bus_hz = actual / (GENCLK_DIV + 1);
> + host->current_speed = 0;
> + priv->cur_speed = host->bus_hz;
> +}
> +
> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
> +{
> + int i;
> + int interval;
> + unsigned int v;
> + unsigned int len;
> + unsigned int range_start = 0;
> + unsigned int range_length = 0;
> + unsigned int middle_range = 0;
> +
> + if (!sample_flag)
> + return -EIO;
> +
> + if (~sample_flag == 0)
> + return 0;
> +
> + i = ffs(sample_flag) - 1;
> +
> + /*
> + * A clock cycle is divided into 32 phases,
> + * each of which is represented by a bit,
> + * finding the optimal phase.
> + */
> + while (i < 32) {
> + v = ror32(sample_flag, i);
> + len = ffs(~v) - 1;
> +
> + if (len > range_length) {
> + range_length = len;
> + range_start = i;
> + }
> +
> + interval = ffs(v >> len) - 1;
> + if (interval < 0)
> + break;
> +
> + i += len + interval;
> + }
> +
> + middle_range = range_start + range_length / 2;
> + if (middle_range >= 32)
> + middle_range %= 32;
> +
> + return middle_range;
> +}
> +
> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
> +{
> + int i = 0;
> + struct dw_mci *host = slot->host;
> + struct mmc_host *mmc = slot->mmc;
> + int smpl_phase = 0;
> + u32 tuning_sample_flag = 0;
> + int best_clksmpl = 0;
> +
> + for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
> + smpl_phase %= 32;
> +
> + mci_writel(host, TMOUT, ~0);
Why you need this?
> + dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
> +
> + if (!mmc_send_tuning(mmc, opcode, NULL))
> + tuning_sample_flag |= (1 << smpl_phase);
> + else
> + tuning_sample_flag &= ~(1 << smpl_phase);
> + }
> +
> + best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
> + if (best_clksmpl < 0) {
> + dev_err(host->dev, "All phases bad!\n");
> + return -EIO;
> + }
> +
> + dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
> +
> + dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
> + best_clksmpl, tuning_sample_flag);
> + return 0;
> +}
> +
> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
> + struct mmc_ios *ios)
> +{
> + int ret;
> + struct dw_mci_slot *slot = mmc_priv(mmc);
> + struct k3_priv *priv;
> + struct dw_mci *host;
> +
> + host = slot->host;
> + priv = host->priv;
> +
> + if (!priv || !priv->reg)
> + return 0;
> +
> + if (priv->ctrl_id == DWMMC_SDIO_ID)
> + return 0;
> +
> + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
> + ret = dw_mci_set_sel18(host, 0);
> + else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
> + ret = dw_mci_set_sel18(host, 1);
> + if (ret)
> + return ret;
> +
> + if (!IS_ERR(mmc->supply.vqmmc)) {
> + ret = mmc_regulator_set_vqmmc(mmc, ios);
> + if (ret) {
> + dev_err(host->dev, "Regulator set error %d\n", ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct dw_mci_drv_data hi3660_data = {
> + .init = dw_mci_hi3660_init,
> + .set_ios = dw_mci_hi3660_set_ios,
> + .parse_dt = dw_mci_hi6220_parse_dt,
> + .execute_tuning = dw_mci_hi3660_execute_tuning,
> + .switch_voltage = dw_mci_hi3660_switch_voltage,
> +};
> +
> static const struct of_device_id dw_mci_k3_match[] = {
> + { .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
> { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
> { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
> {},
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 75da3756955d..5403758bf621 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -314,6 +314,8 @@ struct dw_mci_board {
> #define SDMMC_DSCADDR 0x094
> #define SDMMC_BUFADDR 0x098
> #define SDMMC_CDTHRCTL 0x100
> +#define SDMMC_UHS_REG_EXT 0x108
> +#define SDMMC_ENABLE_SHIFT 0x110
where you use these two?
> #define SDMMC_DATA(x) (x)
> /*
> * Registers to support idmac 64-bit address mode
>
Powered by blists - more mailing lists